Pj December 12, 2020 Whirlpool Electric Double Oven Model # RBD245PD--Lights in both top and bottom ovens will not turn off.
1 Answer PJ, We would need the complete model number of your unit to properly assist but if the oven can be set and it turns on, but the cancel button beeps but will not turn off the elements and it has to be shut off at the breaker then the issue will be a relay control board that is faulty. Read More...
David September 12, 2019 for Model Number RBD245PDQ14 looking for part number 8300428 white touch pad
1 Answer David, This part is no longer being manufactured and all of our parts suppliers have already sold out of the white. If you really want to keep the unit you could order the black console but just keep in mind the main contro is no longer available also. Read More...
Krista January 24, 2018 for Model Number RBD305PDB12 Hello, the oven is not working and the error code is EO F2. The display keeps changing to bake, broil, delay etc and the oven beeps all night. Also, is the control panel and the control board one and the same or are they different parts?
1 Answer Krista, The F2 E0 code indicates a Key Pad held down too long or Key Pad is shorted. Check keypad connector for firm connection. Press CANCEL. If error code returns after 60 seconds, replace keypad. Replace control. Yes, the control board and the control panel are two(2) separate components. At this point you will need the WP8300435 / 8300435 Control Panel Assembly w/Membrane Switch (black model). The part is in stock and available at this time. Thanks, Read More...
Janelle June 18, 2017 for Model Number RBD245PDQ8 A few weeks ago the oven would randomly beep. Then two days ago it showed an error code...think it was F2 something. I pressed a button on the panel and the code went away. Now the display is completely blank and the oven will not turn on. The lights inside still work. When turning breaker off and back on, display is still off but makes a beep and then some random beeping sounds. If buttons are pushed, they beep. If oven start is pressed it beeps 2x then pause then 3x in a row. What parts do I need and/or what order should I check for the parts needed. Thanks!
1 Answer Janelle, With a F2 error code this would indicate that the keypad is not connector or has a stuck key. With the display going out and the keypad beeping when pushed it would likely be that the control board of the unit is what caused the error and is causing the display to not work. Read More...
Helen February 19, 2017 for Model Number Whirlpool RBD0245PDQB My display panel just went out one day. No intermittent beeping. When I open the oven door the lights still comes on in both ovens. After reading some of the other questions, I turned off the circuit breaker. When I turned it back on there was a beep; however, the lights did not come back on. Seeking advice as to what part might remedy my problem.
1 Answer Hello Helen, This could be the fuse WP4451042 or WPW10638608 just before the control panel or the low voltage transformer WP9760587. You could even just have a poor connection so the panel should be removed and the connections pulled off one at a time several times and put back to rub off any possible corrosion that could be present. Let us know if you are still experiencing issues and please verify the model number. The model number provided did not come up as valid, (thus the two fuse part numbers). Since it is necessary for correct part numbers and diagnosis, it will be needed for a detailed diagnosis. Thank you for your patience and understanding in this matter. Read More...
Zach January 28, 2017 for Model Number RbD245pdq10 Is this the complete board with buttons and computer board.
1 Answer Zach, This control panel WP8300428 will be just the control panel and the keypad. If you need the control board then you will need to get part number 8302967. Read More...
Scott January 01, 2016 for Model Number rbd245pdq8 Our oven has stopped working. The display is totally dead, but the oven light still comes on. the oven makes some occasional "beeps" but that is it. I turned the circuit breaker off and back on but that did not help. Does this sound like a control board, display issue or something else? Thank you
1 Answer Hello Scott, If all connections are verified tight, the problem is most likely a failed control 8302967 or control panel WP8300427. Read More...
Harry November 01, 2015 for Model Number RBD245PDQ11 Control panel isnt working Originally was getting a F2 E6 code Our power surged and when it came back on the oven beeped a few times ,front panel was not lit up but oven turned on and it started but no lightsat this point then it beeped and shut off. going on 3 years without them working. any suggestions????
1 Answer Hello Harry. CANCEL key drive line open. 1. Check keypad connector for firm connection. 2. Press CANCEL. If error code returns after 60 sec., replace keypad. 3. Replace control. Read More...
James June 21, 2015 for Model Number RBD245PDQ1O Does this part include the board and ribbon? I am getting a F2 E1 error on my Whirlpool RBD245PDQ1O. Will this fit my model?
Maliz November 16, 2014 for Model Number RBD245PDT12 My oven has stopped working and only makes sounds at random times. The control panel does not show anything as if it were to be off. Do you have any suggestions on what to do?
1 Answer Hello Maliz. It sounds like the thermal fuse WP4451042 may be bad and need to be replaced on the unit. Read More...