Dirk M January 09, 2015 for Model Number KFCS22EVMS4 I got the endcap and installed it, but having problems with deli door cover. Is there a trick to re-install this cover. I've tried to slip in into the holes on each side but I'm afraid that I will break of the pin that I just replaced. Thanks
1 Answer Hello Dirk. It will go on there. You can flex the middle slightly to help install the cover. Read More...
Becci M. October 04, 2014 for Model Number KFCS22EVMS00 The model is KFXS22EVMS0- a counter depth french door Kitchenaid with internal water dispenser. The pin on the right side that holds the deli center door in place has broken. What part number should I use to rode a replacement?
1 Answer Hello Becci, You will need to order WPW10121977 for the right glide. If the left is needed, WPW10122078. Read More...
Sandy August 31, 2014 for Model Number KFCS22EVMS2 I need to replace the right side (on my right when I'm standing in front of the refrigerator looking in) end cap because the bracket that holds the deli cover broke off. The unit has a small "slider" for temperature control of the deli tray (with a picture of a thermometer on it). Can you tell me which part number this is? The picture I'm seeing on the website doesn't look right. Thank you. Best regards, Sandy
1 Answer Sandy, based on the model number given the right side end cap is part number WPW10121977. Thanks! Read More...
David K July 26, 2014 for Model Number Kfcs22evms00 Kfcs22evms00 I see no screws, hex or otherwise, after removing deli tray support struts and crisper drawer.
1 Answer David, When you look at the endcap there are 3 openings that if you look inside them you will see a 1/4" screw in each one of them. You would need to remove the screws to take the endcap off. Read More...
John B. July 08, 2014 for Model Number KFCCS22EVMS4 When ordering an endcap is the right endcap actually on the left when I open the door and am facing the fridge? Seems silly but the pictures seem to indicate this.
1 Answer Hello John, In appliances, unless otherwise noted, parts are always listed as you are facing the product. Read More...
Linda April 29, 2014 for Model Number JFC2290VPR1 The hinge pin on the right side of the deli drawer broke off. What part do I need to replace it for my model?
Joress April 05, 2014 for Model Number kfcs22evms4 I'm trying to replace the right side end cap for the deli drawer. I read all the answers and can't match what I see with what you wrote--I don't see the screws within the end cap or on the rail to be able to remove anything. Please provide instructions on how to replace the right side end cap. I am not a repair person but I am handy and your written instructions in the Q&A's are not detailed enough for a homeowner who is not a repair person. Thanks.
1 Answer The endcap will have screws that hold it in place. If you remove the crisper drawers, the deli drawer the deli drawer cover and look at the endcap, there will be 3 insets that will have screws in them. These screws are 1/4" hex screws that you remove and then slide the endcap forward and it will come off. Read More...
Mary April 04, 2014 for Model Number KFCS22EVMS5 Like many other customers, the pin which holds the deli drawer door has broken. According to Whirlpool's parts list, the part number of the pantry drawer end cap on the right side is W10121977. I've looked very carefully and can't find any screws, even under the drawer guide. There are several plastic clips. Can you tell me how to replace the end cap without screws?
1 Answer Mary, The endcap will have screws that hold it in place. If you remove the crisper drawers, the deli drawer the deli drawer cover and look at the endcap, there will be 3 insets that will have screws in them. These screws are 1/4" hex screws that you remove and then slide the endcap forward and it will come off. Read More...
Richard S July 05, 2013 for Model Number KFCS22EVMS5 Please advise of which tabs, and screws need to be released so that this endcap can be removed.
1 Answer Richard, To remove the endcap, you will need to remove the crisper bins and the glass above the pantry drawer. Remove the pantry drawer and cover. Once out there are 3 screws that will allow you to take the endcap off. If you slide the rail out you will see screws that hold the rail on in which you will want to remove. Once the endcap is off you can remove the back piece by taking out of the clips and on the back part of the endcap there are 3 clips that hold the rail. Push in and pop the rail out. This rail will be able to twist off the selector. Then you can pop the selector knob off. Read More...
Paul April 08, 2013 for Model Number kfcs22evblo kitchenaid refrig I broke the right side hinge (as I am looking at unit) deli center in refrigerator compartment. Someone did not put deli shelf all the way in and I came along and closed doors to refrigerator. This is the side that has the temperature control slide bar for deli center. Is part AP4365313 the correct one? Where would I get step by step instuctions to pull and replace? Thank you.
1 Answer Hello Paul! Yes, the pin is on the end cap. The right side is part number WPW10121977. Thanks. Read More...