Glenn M February 10, 2014 for Model Number LSC8245ANO The dial on my washer just spins on the timer shaft and will not allow me to set the timer. I tried to pull it off and I tried to unscrew it, but nothing seems to work. What do I need to do to remove the knob and what parts will I need to fix it?
1 Answer Hello Glenn. You need to check and see if the knob WP3364293 is broken on the unit. Read More...
David R January 04, 2014 for Model Number LL9245BQ1 Need to replace timer- part not available. Suggest a compatible replacement? Thank you.
1 Answer Hello David! The timer listed for model LLR9245BQ1 is part number 3946225. Unfortunately, this item has been discontinued with no further replacements or cross references available and our company is unaware of any other available sources. Sorry about that! Read More...
Roy October 18, 2013 for Model Number TAWS690AWO I need to replace the timer, but I need to remove the timer knob. How do you take it off? I pried out the center metal plate on the knob but there is no screw behind it. I purchased a timer and knob for you, order number 3734915
Tony H October 13, 2013 for Model Number Whirlpool direct drive washer WX46701 This is quite an old washer circa 1995 but it works 100% yet. Now the timer knob fell off with clear plastic small clear dial underneath it. We can still use the washer by pull turn push the big dial. Is there any repair kit available for this?
1 Answer Tony, It is showing that the part number for the timer knob is part number WP3364293 and the timer dial is part number 8274331 which the dial is showing as being discontinued by the manufacturer. Read More...
Kowal September 24, 2013 for Model Number la5668xtw1 Where can I buy a selector knob for Whirlpool model # LA5668XTW1?
K.W. November 19, 2012 for Model Number Whirlpool Stylemaster I broke the timer knob on my mom's washer. Under the lid it says Stylemaster 907675-A. And the model number is LA5500XTW0. What is the part number I need for the knob? or the knob and dial? Thank you for your help.
1 Answer KW, the knob is part number W10801656 and the dial is part number WP64138. Thanks! Read More...
G September 18, 2012 for Model Number lxr7133jq1 My washer will goto wash cycle but wont go to next cycle.
1 Answer Hello G. Based on the information you provided, it sounds like the lid switch 3949247V is bad and may need to be replaced in the unit. Check and see if it is bad or broken and if so, replace the lid switch. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Julie August 11, 2012 for Model Number AX5133VW1 I have an old Roper washing machine, model AX5133VW1. The timer dial and knob are broken. I have been unable to get them off. I looked at some of your videos but the examples are different than our washer. Is there a video on your site that would show how to replace these parts on a model similar to ours? Also, is this the right part from your site: AP3956258? Thanks!
1 Answer Hello Julie! Yes, the knob and dial 280193 is the correct replacement used on your model AX5133VW1. Unfortunately, we do not have an installation video available for this part. You will need to unscrew the broken piece of knob by hand, pry off the black dial on the threaded shaft with a screw driver/putty knife and screw on the knob by hand. Hope this information helps you, Julie. Thanks for your inquiry! Read More...
Kevin July 18, 2012 for Model Number AL5143VWO In your diagram I need the knob that you have as #44 but when you scroll down to #44 it just shows the dial and not the knob??? I need the knob that screws in to the center of the photo you show.
1 Answer Hello Kevin! According to the manufacturer part number 280193 is the knob and dial assembly. I do apologize for the confusion. Thanks! Read More...
Ron March 20, 2012 I need a timer knob for a Kenmore washer made by Whirlpool . Sears part number 86673800. What is your part number?
1 Answer Hello Ron. Based on the model number you provided, 8055347 is the correct timer knob. Hope this helps. Read More...