Skip to Content

2 Day Quick Delivery!
365 Day Return Policy!
15 million satisfied customers
Over 2.1 Million Parts In Stock
Free Tech Support!
Google Trusted Store

Customer Questions and Answers for Dishwasher Door Latch Handle by Whirlpool

Best Seller

Manufacturer Part

Dishwasher Door Latch Handle

4.89 (64)

By: Whirlpool

Part Number: OEM18036873

Manufacturer Part Number: WP8269117

The Dishwasher Door Latch Handle is an OEM part for Whirlpool dishwashers. It ensures that the dishwasher door closes securely, enabling the machine to operate correctly. This handle engages the latch mechanism, providing a tight seal to prevent leaks and allowing the dishwasher to run its cycles efficiently.

Over time, the door latch handle can wear out or break due to frequent use, exposure to harsh detergents, or mechanical failure. Causes of a bad door latch handle include physical damage, internal component wear, or misalignment.

Symptoms of a bad door latch handle include:

Difficulty in closing or latching the dishwasher door
The dishwasher not starting or stopping mid-cycle
Leaks around the door during operation
The handle feeling loose or not engaging properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

More

$63.58

Compare At:: $75.66
You Save:: $12.08

IN STOCK

Ships Today Guaranteed

Add to Cart

Questions & Answers

For Whirlpool Dishwasher Door Latch Handle (Part Number: OEM18036873)

Albert B February 25, 2016 for Model Number KUDPO1ILBL6

My KitchenAid dishwasher latch broke and I ordered replacement part AP303924. I followed the video tutorial and replaced the broker part with the new part. All went exactly as the video showed. After reconnecting the power and water, I started the dishwasher to run it through a cycle. All went well and it started right up and began to fill with water. I checked back about 20 min later and It appears to have gotten half way through the cycle and stopped. I can't' get it to restart. None of the operation lights go on when I push them. I disconnected that power and removed the front panel to check for loose wires or burnt wires etc. All appears to be fine. I also checked the power outlet and it is also working. The dishwasher was working prior to fixing the handle, I just need to manipulate the handle into place to get it to lock, so all was working before I replaced the handle. Did I do something wrong? Appreciate and help in trouble shooting.

1 Answer

Albert, There is a thermal fuse in the area of the control board that you will want to test to make sure that it has continuity. If there is no continuity then the fuse is the problem and will need to be replaced. The fuse part number is 8193762.

Read More...

K. December 14, 2015 for Model Number DU1055XTVS0

I have a whirlpool quiet partner 2 series dishwasher #DU1055XTVS0. The handle is loose like there is no tension and I can't get the door to latch in all the way, preventing me from starting a cycle. I replaced the door latch part as well as the strike. Still having the same issues. Nothing looks broken off the handle or latch parts but it's almost like its missing a spring, although according to the compatible parts this handle doesn't need a spring? Any ideas? Thank you!!

1 Answer

Hello K., You will need to replace the latch bracket 8193882 and the door latch actuator WP8524471.

Read More...

Rick September 11, 2015

My door handle gets stuck when I open the door. The handle stays stuck and I can not close the door to latch it shut.

1 Answer

Hello Rick. Based on the information you provided, you will need to order and replace the handle and latch assembly on the unit.

Read More...

Kel Kel August 22, 2015 for Model Number MDBTT60AWB

Went to close my dishwasher door and the handle had absolutely no tension in the door handle. Would not latch. Handle just flops.

1 Answer

Kel Kel, With the door handle flopping around, this would mean that it is broken and would need to have the handle replaced. The part you will need is the door latch assembly WPW10130695 which comes with the handle.

Read More...

Tired Housewife August 16, 2014 for Model Number KUDS24SE or KUDC24SE

My door latch handle of my KitchenAid dishwasher is broken. The door will not open -- it is stuck shut. How do I open the dishwasher to replace the handle?

1 Answer

Tired Housewife, To get the door open you will need to grab the upper corners of the door and lift and give a good jerk to release the door.

Read More...

Dave March 12, 2014 for Model Number kuds01djss0 kitchenaid dishwasher

just ordered (order #4190776) a new door latch handle and handle spring, but can't figure out from the exploded view or looking at the actual unit how the handle attaches and where the spring goes. Is there a video or other pictorial that would show me how all the pieces in the latch handle/actuator assembly fit together? Thanks, Dave Barshis

1 Answer

Dave, When looking at the handle and the latch bolt, there are hooks that come off the sides. The spring will attach to the hooks to allow the handle to come back to position.

Read More...

Joanne C September 10, 2013 for Model Number KUDP02FRBL0

Hi The door on my KitchenAid dishwasher won't stay shut. Sometimes it shuts but will pop open during the cycle. Today it seems like it won't latch at all. I don't see anything that appears broken or missing. If there is something broken, I am unsure which replacement part to order. The dishwasher door latch handle? Actuator door latch? Or something different all together? I hope you can help, otherwise I may have to hand wash all my dishes (GASP!) Thank you!

1 Answer

Hello Joanne. Check and make sure the unit is level. If it is level, then you will need to replace the latch 8193830 in the unit.

Read More...

Larry August 23, 2013 for Model Number Mdl: KUDI01ILWH3 Kitchenaid dishwasher

The ear on the right door latch is broken and the spring is missing. Do I need to order the spring or does one come with the door handle? Thanks.

1 Answer

Hello Larry! No, the spring is not included with the door handle WP8269117. For the spring use part number WP8268540. Thanks!

Read More...

Paula January 09, 2013 for Model Number KUDMO1TJ

HI, I need to replace the gasket on the inside of my dishwasher can you help me with the correct part?

1 Answer

Paula, model KUDM01TJ is a partial model number. We will need the full model number to determine the correct door gasket used on your model. Please obtain this information and repost for further assistance. Thanks!

Read More...

Mark Crane January 03, 2013 for Model Number 8269117

I have replaced the latch handle but the latch assembly is to under tension so it won't depress the contact switch. How is this tension maintained, is it a spring? If so can it be ordered?

1 Answer

Hello Mark, To properly assist you we will need your model number to help you with this. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278

Need Help? Chat with a Pro

Or ask a question by filling in the form

Share your thoughts with other customers

Over 2.1 Million Parts In Stock
2 Day Quick Delivery!
365 Day Return Policy!
Free Tech Support!
Google Trusted Store