Dishwasher Control Panel Lcd Parts

This keypad is the user interface touchpad for the appliance's control panel, letting you select cycles and settings with responsive button inputs. It replaces a worn or unresponsive touchpad to restore normal front-panel control. What it does:

• Registers button presses and sends user commands to the appliance control board
• Restores front-panel responsiveness when buttons are sticking or unresponsive
• Helps correct intermittent or missing input signals that prevent cycle selection
• Can resolve issues where the display shows settings but will not accept changes

• One keypad assembly

• Disconnect power before servicing
• Handle the keypad assembly carefully and avoid flexing or contaminating the ribbon cable/contacts
• Reconnect ribbon cables and secure any retaining clips; ensure the keypad is seated flush in the control bezel
• If problems persist after replacement, check the main control board and connectors for damage

This control panel is the user-facing console assembly that houses buttons, touch controls and the display, letting you select cycles and monitor oven status. Replaces a worn, cracked, or unresponsive console to restore normal control operation. What it does:

• Provides the front-facing buttons/touch keys and display used to start and adjust cooking cycles
• Relays user commands to the oven control board for cycle selection and timer functions
• Commonly replaced for symptoms such as unresponsive keys, missing or dim display, or cracked/damaged console
• Interfaces with the main control; does not include internal control electronics

• Disconnect power to the appliance at the breaker before starting any repair
• Replacement typically requires removing the oven door or trim and unscrewing the old panel; keep screws and brackets for reassembly
• Handle the display and ribbon/connectors carefully to avoid damage; verify connector seating before restoring power
• If other control symptoms persist after replacement, test the main control board and wiring harness for faults

This control panel is the front user interface that houses the oven/dryer's buttons and display, letting you select cycles and settings for normal operation. It restores responsive controls and visible feedback for accurate appliance use. What it does

• Provides the main control surface and display for selecting functions and cycle options
• Translates button presses into electronic signals for the appliance control system
• Common symptoms it addresses: unresponsive buttons, non-working or dim display, or intermittent control behavior
• Works with the appliance's control electronics to show status and error indicators

• Disconnect power to the appliance before starting any work to avoid shock
• Remove outer console/trim per service manual to access and replace the panel
• Handle the assembly carefully to avoid damage to the display, keypad, or circuit board

This control panel is the console assembly that provides the appliance's user interface, giving reliable access to cycle settings and status indicators so you can select and monitor wash/dry functions easily. What it does:

• Houses buttons, touchpads, and display elements used to start cycles and adjust settings
• Communicates user selections to the main control board so the appliance runs chosen cycles
• Restores missing or unresponsive controls and unreadable display elements
• Common symptoms: unresponsive buttons, blank or unreadable display, or non-functioning cycle selection

• One control panel/console assembly

• Disconnect power before starting — electrical shock hazard
• Replace only if confirmed faulty; follow service manual steps for access and connector handling
• Handle the display area and ribbon/connector cables carefully to avoid damage

This caster support wheel helps restore smooth movement and stable support for the appliance's cabinet or drawer assembly. It replaces a worn or damaged wheel so the part rolls and aligns correctly. What it does:

• Replaces a worn or broken caster wheel that prevents smooth rolling
• Restores proper support and alignment for drawers or appliance base panels
• Reduces catching, scraping, or noisy movement caused by damaged rollers
• Helps maintain consistent front-to-back leveling when used with leveling hardware

• One caster support wheel

• Designed for basic drop-in replacement; position part where existing caster was mounted
• Turn off power and remove food/items or shelves from the cabinet/drawer area before working
• Use appropriate hand tools; avoid over-tightening fasteners which can bind the wheel

This electromechanical timer controls cycle selection and timing for your appliance, restoring proper step progression and cycle operation. It replaces a worn or failed timer to help get your appliance cycling again. What it does

• Advances and times wash/dry cycles based on the selected program.
• Re-establishes cycle control when the timer motor or cam contacts fail.
• Commonly used when cycles won't advance, the appliance won't start a timed cycle, or settings don't change.
• Works as the user-operated timing/control mechanism for mechanical cycle selection.

• One electromechanical timer assembly.

• Disconnect power before starting — shock risk. If the appliance is gas, also shut off the gas supply.
• Requires panel access and basic wiring knowledge; note wire locations or take a photo before disconnecting.
• Tighten fasteners and confirm wiring connections are secure; test operation with power restored.

This keypad assembly is the user-facing control panel that lets you select cycles and options on your washer. Replaces a worn or unresponsive keypad to restore reliable button response and control readability. What it does:

• Provides tactile button input for cycle selection, start/pause, and option functions
• Restores control responsiveness when buttons are sticky, cracked, or unresponsive
• Maintains the front console finish and label legends for clear visibility
• Interfaces with the washer's control board to send user commands

• Disconnect power to the appliance before servicing to avoid shock or injury
• Access typically requires removing the top or front console cover; keep track of screws and clips
• Handle the ribbon cable and connector carefully to avoid damage; align and seat fully on reinstallation

Color: White

This control panel assembly replaces a damaged or malfunctioning console that houses the user interface and controls. Restores reliable button input and display feedback so you can select cycles and options with confidence. What it does:

• Houses the push buttons, touchpads, and display used to operate the appliance
• Routes user inputs to the control board so cycles and settings start as commanded
• Commonly replaced when buttons are unresponsive, display is blank, or wrong settings engage
• Helps resolve intermittent or stuck-key symptoms and visible panel damage

• Disconnect power to the appliance before servicing to avoid shock or injury
• Installation typically requires removing the top/console and disconnecting ribbon or wiring harnesses — handle connectors gently
• Keep small screws and trims organized; avoid flexing the display or circuit contacts

Color: Black

This electronic control board is the main console controller that manages a range of appliance functions and restores responsive controls and displays. Replace a failing board to get timed cycles, settings and display feedback working again. What it does:

• Controls user interface, display and timed cycle logic for the appliance
• Sends signals to heating/motor components to start and stop operations
• Responds to touchpad or button inputs so selected settings run correctly
• Common symptom fixer: no display, unresponsive controls, or erratic cycle behavior
• Works with existing harnesses and sensors when compatible

• One electronic control board

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle the board by the edges and avoid touching circuitry to prevent static damage
• Reconnect all wire harnesses in their original positions; loose connections can cause faults

This keypad is the user-facing button assembly for the oven control panel, letting you send cooking commands and change settings. It restores responsive button control so the range accepts inputs and starts selected functions. What it does:

• Provides the tactile buttons used to enter bake, broil, timer and temperature commands
• Replaces worn or unresponsive keys that won't register presses or skip inputs
• Fixes issues where the control panel won't respond or certain functions won't start
• Works with the control board to relay user selections to the oven electronics

• One keypad (button assembly) as shown

• Disconnect power to the appliance before beginning any service to avoid shock
• Remove control panel trim or bezel as required to access and disconnect the keypad ribbon or connector
• Handle the keypad and ribbon gently to avoid tearing or bending contacts
• Test the keypad operation after reconnecting power and reassembling the panel

This electronic control module manages a range of oven/cooktop functions so the appliance responds correctly to front-panel commands and control inputs. Replacing a failed module restores normal control and display operation. What it does:

• Receives input from touchpads/knobs and sends signals to heating elements, relays, and sensors
• Controls oven timing, temperature setpoints, and cycle sequencing
• Powers or drives the display and indicator lights when working properly
• A failed module can cause unresponsive controls, blank or erratic displays, or interrupted heating cycles

• Disconnect all power to the appliance before starting work to avoid shock or damage
• Handle the board by its edges and avoid static discharge; wear a grounded wrist strap if available
• Verify connector orientation and seating; do not force connectors or components

This 10-button switch assembly replaces the worn or unresponsive front control buttons on compatible Frigidaire appliance control panels, restoring reliable push-button input and normal user control of cycle and function selections. What it does:

• Replaces cracked, stuck, or non-responsive push buttons on the appliance control console
• Restores tactile button feedback and reliable electronic input to the control board
• Helps regain access to oven/range or console functions that won't register when buttons fail
• Fits into the front user interface assembly to provide a like-for-like button layout

• Always disconnect power to the appliance before beginning repair to avoid shock or damage
• Installation typically requires removing the control panel or console; handle the assembly and ribbon connector with care
• Inspect connectors and mating surfaces for damage or debris before installation

This electronic control board replaces the refrigerator's main user interface control, restoring reliable temperature management and cycle sequencing. It lets the appliance receive user inputs and run timed defrost, compressor, and fan operations. What it does:

• Houses the control circuitry that manages cooling cycles, defrost timing and fan/compressor operation
• Responds to user input from the front control panel and translates commands to the appliance systems
• Can stop or reset erratic cycling, display control errors, or fix non-responsive controls when the board is faulty
• Common symptom: unresponsive control panel, incorrect temperatures, or failure to start compressor or defrost cycle

• High-level replacement only — disconnect power before accessing electrical components
• Handle the board by its edges and avoid static discharge; use an anti-static wrist strap if available
• Verify connectors are fully seated and wiring matches original locations before restoring power