Dishwasher Upper Rack Roller Parts

Color: White. For gray order WD35X21041. Roller only. Does not include axle. For axle order WD35X21041. Updated by the manufacturer. May be wider than original.

This dishrack roller and stud assembly lets the rack glide smoothly in and out of the dishwasher. Replacing a worn or broken wheel restores proper rack movement and helps prevent binding, noise, and derailment. What it does:

• Attaches to the rack wire with an integrated stud/clip to provide a rolling wheel on the rack rail
• Restores smooth, even rack travel and alignment
• Replaces cracked, missing, or seized rack wheels
• Common symptoms: rack is hard to slide, wobbles or comes off track, or the wheel is visibly damaged

• One roller-and-stud assembly

• Disconnect power before servicing; work with dry hands
• Pull the rack fully out and lift it off the rails
• Release the old stud from the rack wire, position the new assembly, and snap/lock it in place with the wheel oriented to the rail
• Reinstall the rack and verify smooth movement

This roller kit replaces worn or broken drawer rollers so a refrigerator or freezer drawer opens and closes smoothly. It restores proper drawer alignment and reduces sticking or dragging for easier access to stored food. What it does:

• Replaces damaged or worn rollers that cause drawers to stick, bind, or sit unevenly
• Guides the drawer along its track for smooth, consistent movement
• Reduces noise from grinding or scraping during drawer operation
• Helps maintain proper drawer alignment to prevent jams and protect the glide track

• One roller kit assembly

• Disconnect power to the appliance before beginning any repair to avoid injury
• Remove the drawer and inspect the slide/track for damage or debris before installing the new roller
• Installation typically requires basic hand tools and removing the drawer from its track; follow the OEM diagram for correct placement
• If the track or other components are damaged, replace them as recommended by the OEM

This tiered upper rack kit replaces a damaged or missing upper rack to restore secure placement and organized spacing for cups, small plates and dishwasher-safe items. It helps improve loading capacity and prevents small items from tipping during cycles. What it does:

• Provides a tiered shelf for cups, mugs and small dishware to keep items secure
• Restores proper rack alignment and rolling action for smooth in-and-out movement
• Reduces shifting or tipping of small items that can block spray arms or cause poor cleaning
• Replaces worn or broken rack components so dishes load and drain correctly

• Disconnect power to the dishwasher and turn off water supply before starting
• Slide out the old upper rack and remove any retained clips or stops before installing the new rack
• Check rollers, rails and clips for wear and replace if needed to ensure proper operation
• Handle edges carefully and reassemble all stops and fasteners; test rack travel before running a cycle

The Lower Dishrack is an OEM part for GE dishwashers. It provides a sturdy shelf for placing pots, pans, plates, and other dishware on the bottom level of the dishwasher interior. The lower dishrack supports dish loads, holding them securely in place during the wash cycles. 

Causes of a failing lower dishrack include long-term wear and tear, corrosion from exposure to water and detergents, damage from improper loading, and loose or broken components.

Symptoms of a bad lower dishrack:

• Difficulty sliding the rack in and out
• The rack getting stuck mid-cycle
• Broken or missing wheels/rollers
• Rust formation
• Bent or misshapen wires

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement lower dishrack restores smooth rolling and secure loading on the bottom level of your dishwasher, helping plates, bowls, and pots stay in place for consistent spray coverage and reliable cleaning results. What it does

• Organizes and supports dishes, cookware, and utensils on the lower level during wash and dry cycles
• Rolls in and out on the tub rails for easy loading and unloading
• Positions items for effective spray coverage and drainage
• Replace if tines are broken, coating is peeling/rusting, the rack derails or won't roll smoothly, or items tip over

• One lower dishrack

• Turn off power to the dishwasher before servicing
• Pull the old lower rack straight out; release/remove any rack stops if present
• Transfer any removable accessories from the old rack (such as utensil basket or clips), if needed
• Slide the new rack onto the rails and verify smooth operation

This durable silverware basket holds forks, knives and other utensils securely during dishwasher cycles so small items stay corralled and clean. Fits into the dishwasher rack to keep cutlery organized and prevent items from falling through. What it does:

• Holds and organizes silverware and small kitchen utensils during wash cycles
• Keeps utensils upright and separated for better cleaning and drying
• Prevents small items from slipping into the dishwasher spray area or drain
• Replaces cracked, broken or missing baskets that allow cutlery to scatter

• No tools required; remove the lower rack and set the basket into the designated rack slots
• Ensure basket snaps or rests securely and does not interfere with rack movement or spray arms
• Inspect basket for cracks or sharp edges before use; discontinue use if damaged
• Always follow the appliance manufacturer's safety and installation instructions

The Lower rack roller and stud assembly is an OEM part for GE dishwashers. It supports smooth movement of the lower dish rack in and out of the tub.

Causes of a bad roller and stud assembly can include wear from repeated extension/retraction of the rack. Mineral buildup may also impede smooth operation over time.

Symptoms of a bad roller and stud assembly include:

• Difficulty fully extending or retracting the lower dish rack  
• Noisy squeaking or grinding noises when moving the rack
• Rack that does not glide easily or gets stuck partially out

Replacing the roller and stud assembly with this genuine GE part restores convenient access to dishes on the lower rack. Its quality ball bearings and durable construction enhance usability cycle after cycle.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.