Dishwasher Control Panel Lcd Parts

The Panel-Facia is an OEM part for Bosch dishwashers. It provides an interface and housing for the control buttons and touch display of the dishwasher.

Causes of a bad panel-facia can include normal wear and tear over time, exposure to moisture or impacts, or failure of the electronic components behind the panel.

Symptoms of a bad panel-facia include:

• Unresponsive or intermittent control buttons
• Flickering or non-functional display screen
• Physical damage like cracks, scratches or missing pieces that compromise the panel's protective barrier

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Control Panel is an OEM part for Bosch dishwashers. Located at the top of the dishwasher door, the control panel includes push buttons and digital displays to allow for programming cycles, adjusting settings, monitoring status, and starting/stopping the unit.

Causes of control panel issues can be related to general wear and tear over time, exposure to moisture or impacts, or failures in the electronic components. 

Symptoms of a bad control panel include:

• Non-responsive or uncalibrated buttons
• Faulty or unreadable digital displays
• Inability to power on or start cycles
• Malfunctioning programming and cycle options
• Repeated error codes

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Color: Black

The Panel-Facia is an OEM component specifically designed for select Bosch dishwashers featuring full-paneled front doors. It serves as the outer enclosure protecting internal electronics and circuitry.

Premium high-gloss surfaces endure years of moisture exposure without dulling. Thick reinforced polymers guard valuables against accidental bumps or bashes from nearby foot traffic.

Causes for replacement typically relate to direct impact fractures exposing delicate insides to potential liquid intrusion. Prolonged harsh chemical contact may also lead to stress cracks developing over time.

Symptoms requiring a new panel-facia include:

- Loose fasteners allowing unwanted side-side movement or door misalignment  
- Physical splits, punctures, or holes compromising the waterproof barrier
- Faded, scratched, or damaged finishes detracting from the modern aesthetic

This OEM Bosch replacement part is also compatible with Thermador, Gaggenau, and selected full-paneled Kenmore dishwashers maintaining consistent appearances. Reinstallation preserves protection and attractiveness.
 

This electronic control board is the appliance's central controller. It interprets user inputs and sensor signals to power components at the right time, restoring reliable operation when the original board fails.

• Interprets user settings and manages cycle timing and temperature control
• Switches relays/outputs to run motors, heaters, valves, fans, and lights
• Interfaces with sensors and safety switches to protect the appliance
• Symptoms can include no display or response, won't start, cycles that won't advance, or erratic operation
• Logs diagnostic error codes to aid troubleshooting

• Disconnect power before servicing; follow ESD precautions and handle the board by the edges
• Access the control area, then note/photograph wiring and move connectors one at a time to the new board
• Mount securely, ensure no wires are pinched, reassemble, and restore power
• Run a diagnostic or test cycle to confirm normal operation

The Panel Facia is an OEM part for Bosch dishwashers. It is the front control panel of your dishwasher, providing a clean and polished look.

A bad panel facia can occur due to wear and tear over time, accidental damage, or exposure to moisture and cleaning agents. Signs of a faulty facia include cracks, discoloration, or a loose fit that compromises the aesthetic appeal of your dishwasher.

Symptoms of a bad panel facia include:

• Cracks or visible damage on the surface
• Discoloration or fading
• A loose or missing panel

Replace your damaged or worn-out panel facia with this genuine OEM Bosch part to restore the appearance of your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Dishwasher Main Control Board Assembly is essential for managing the various functions of your dishwasher. This genuine OEM part ensures reliable performance and seamless operation of cycle settings, water temperature control, and drying processes. Designed specifically for Samsung dishwashers, this main PCB assembly guarantees perfect compatibility and a secure fit. By replacing a faulty control board with this high-quality component, you can restore your dishwasherGÇÖs functionality without the need for a complete unit replacement. The Dishwasher Main Control Board Assembly enhances the efficiency of your appliance, helping to maintain consistent washing results and extend the lifespan of your dishwasher. Installation is straightforward, allowing you to easily perform the repair yourself and save on service costs. Trust this genuine OEM part to deliver dependable control and optimal performance for your Samsung dishwasher, ensuring that every wash cycle operates smoothly and effectively.

This electronic control board is the appliance's main brain. It manages cycles and powers key components based on sensor and user input, restoring normal operation and responsive controls when the original board fails.

• Directs the appliance's operations by processing inputs from sensors and the user interface
• Distributes power to motors, valves, heaters, fans, and other loads as needed
• Monitors system status and logs/communicates fault or error codes
• Typical failure symptoms: won't start, unresponsive controls, stops mid-cycle, intermittent power, or recurring error codes

• Disconnect power to the appliance before servicing
• Use ESD protection and handle the board by its edges
• Photograph wire/connector positions; transfer connectors one at a time to the new board
• Ensure all harnesses are fully seated and the board is secured; run a diagnostic or test cycle after installation

3 digit

This electronic control board is the appliance's central controller, interpreting inputs and switching power to components to run each cycle. Replacing a failed board restores responsive controls and reliable operation when the unit is unresponsive, erratic, or showing error codes.

• Coordinates timing and sequence of operations for the appliance
• Interfaces with user controls and display
• Sends power to motors, valves, fans, or heating elements as directed
• Typical failure signs: no response to controls, won't start/run, erratic or stuck cycles, recurring fault codes

• Disconnect power at the breaker or unplug before servicing
• Use ESD precautions; handle the board by the edges only
• Photograph connections and transfer wiring/connectors one at a time
• Ensure all harnesses are fully seated; follow the service sheet for any model-specific setup or configuration

This Electronic Control Board is the appliance's central control module. It interprets inputs from sensors and switches and directs power to motors, valves, heaters, and fans to run cycles reliably when the original board has failed.

• Manages overall operation by processing signals and executing programmed cycles
• Sends power/commands to components such as motors, pumps, fans, heaters, and valves
• Typical symptoms of a failed board: no power or won't start, unresponsive controls, cycles that won't advance, intermittent shutdowns, or error codes
• Useful when diagnostics point to control failure after ruling out fuses, switches, sensors, and wiring

• Disconnect power before servicing; turn off water supply if applicable
• Use ESD protection and handle the board by its edges
• Photograph/label all connectors; move harnesses one at a time and transfer any jumpers/settings from the old board if present
• Mount securely, reconnect wiring, reassemble, then run the unit's diagnostic/self-test per the service manual

Color: White. Includes insulation. Other colors: For almond use WP3384157, for biscuit use WP3384157, for black use WP3379920.

This is the front control panel fascia for the appliance's user interface. It replaces a damaged or worn fascia so buttons and labels are protected and the unit looks and operates as intended.

• Houses and protects the control buttons/overlay area
• Restores proper alignment and visibility of controls
• Cosmetic renewal for scratched, dented, or cracked panels
• Common symptoms: loose or missing panel, cracked face, worn or unreadable markings

• Disconnect power before servicing
• Transfer any attached switches, display/overlay, and hardware from the old panel
• Handle stainless surfaces carefully to avoid scratches
• Verify correct seating of tabs and screws before reassembly

This electronic control board is the appliance's central "brain," managing power, timing, and safety logic. Replacing a failed board can restore normal operation when the controls are unresponsive, cycles won't start, or performance is erratic.

• Coordinates the appliance's primary operations and timing based on selected settings
• Interprets inputs from sensors, switches, and the user interface
• Switches power to loads (motors, valves, heaters, fans) through onboard relays/triacs
• Common symptoms: won't start or complete cycles; controls/display dead or intermittent
• Logs or displays error codes that indicate a control failure

• Disconnect power before servicing; shut off water or gas if applicable
• Handle the PCB by the edges and use ESD (anti-static) precautions
• Transfer wires/connectors one at a time and mount securely in the original location
• Some models require configuration per the service/tech sheet after installation

Color: Bisque

Color: Stainless

The Panel Facia is an OEM part for Bosch dishwashers. It is the front control panel of your dishwasher, providing a clean and polished look.

A bad panel facia can occur due to wear and tear over time, accidental damage, or exposure to moisture and cleaning agents. Signs of a faulty facia include cracks, discoloration, or a loose fit that compromises the aesthetic appeal of your dishwasher.

Symptoms of a bad panel facia include:

• Cracks or visible damage on the surface
• Discoloration or fading
• A loose or missing panel

Replace your damaged or worn-out panel facia with this genuine OEM Bosch part to restore the appearance of your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.