Dishwasher Control Panel Lcd Parts

The Electronic Control Board is an OEM part for Whirlpool dishwashers. As the central processing unit, this board regulates all wash and rinse cycles according to preprogrammed instructions. It communicates timing and commands to other crucial components.

Symptoms of a faulty control board include: 

• Failure to power on or unresponsive touch controls  
• Inability to select or advance through wash cycles
• Noise or vibration issues from improper component operation 
• Error codes appearing repeatedly on the digital display

Causes can involve water intrusion corroding circuits or individual component failure due to prolonged operation. Over time, environmental factors may inhibit board performance.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Color: Black

This electronic control board is the central "brain" of your appliance. It manages power distribution, sensor inputs, and timing so selected functions run correctly. Replacing a failed board restores proper operation and reliable, responsive controls.

• Coordinates and sequences operations based on user selections and built-in programming
• Interprets inputs from sensors/switches and communicates with the user interface
• Drives components such as motors, pumps, valves, and relays as required
• Common symptoms of a failed board: appliance won't start or respond, cycle won't advance, stops mid-operation, intermittent behavior, or error/blinking status codes

• Disconnect power at the breaker or unplug the appliance before servicing
• Use ESD precautions; handle the PCB by the edges to avoid static damage
• Photograph wiring and transfer connectors one at a time to the new board
• Some models require service-mode setup or programming after installation—follow the tech sheet for your unit

The Panel-Facia is an OEM part for Bosch dishwashers. As the front panel interface, it houses all control buttons, displays, and status indicators.

Symptoms of a bad panel-facia can include non-responsive or stuck buttons, indecipherable displays, or cracks that compromise the panel's integrity. 

Causes of a bad panel-facia dishwasher include:

• Unresponsive or inaccurate control buttons
• Fault codes that cannot be cleared  
• Cracked or damaged fascia compromising controls
• Disrupted electronic communication preventing cycles

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Control Board is an OEM part for Bosch dishwashers. It is the central electronic component responsible for operating and controlling all dishwasher functions. The control board receives input signals, processes commands, and directs the operation of wash cycles, motors, heating elements, and other electrical systems. 

Symptoms of a bad control board can include:

• The dishwasher is not starting or finishing cycles properly
• Lights, displays, or touchpads not working correctly 
• Strange noises coming from the dishwasher interior
• Inability to change programs or select desired cycle settings

Causes of control board failure may be due to electrical issues such as power surges, shorts, or general circuit malfunctions that can interfere with board operation over time. 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

The User Interface is an OEM part for Frigidaire dishwashers. As the user interface, it allows users to select cycles, options, and monitor dishwasher status.

Causes may be due to wear and tear over time, water damage, or shock/impact. This OEM Frigidaire part replaces the entire control panel assembly to restore full functionality.

Symptoms of a bad user interface include:

• Unresponsive or nonfunctional buttons
• Blank or dead display screen
• Inability to select cycles or options
• Erratic operation and unexpected behavior

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This electronic control board is the appliance's command center. It reads inputs from switches and sensors, then directs power to components to run selected cycles—helping restore reliable operation when the original board fails.

• Coordinates timing and power to key components
• Interprets user commands and sensor feedback
• Manages cycle logic and stores/communicates fault codes
• Failure symptoms include no power, unresponsive controls, cycles that won't start or complete, or intermittent operation/error codes

• Disconnect power at the breaker before servicing
• Use ESD precautions; handle the board by the edges and avoid touching circuitry
• Note/photograph wiring and move connectors one at a time to the new board
• Inspect connected loads (motors, heaters, valves, fans) for shorts before powering up the new board

The USER INTERFACE PANEL is an OEM part for Whirlpool brand dishwasher models. It houses the electronic controls and digital display used to program cleaning cycles and adjust settings. 

Symptoms of a bad user interface panel include:

• Glitchy or unresponsive buttons that do not register selections
• Inaccurate or non-functional digital readouts  
• Failure to advance through cycles or changing programming 

As an interface device used frequently, the panel faces wear through repetitive touch inputs. Exposure to moisture splash-back or impact damage poses other risks to components over time. Replacing it with this genuine Whirlpool part restores reliable controls.

This OEM Whirlpool replacement user interface panel is also compatible with KitchenAid, Jenn-Air, Amana, Admiral, and some Kenmore dishwasher models. Secure operation maximizes convenience cycle after cycle.
 

The Console Assembly is an OEM part for Frigidaire dishwashers. It houses the electronic controls, buttons, and touch screen panel which allow users to easily monitor dishwasher cycles and settings. The console assembly is crucial for selecting cleaning options, checking cycle status, and making any adjustments during a wash.

Causes of failure could be due to physical damage, spilled liquids causing corrosion of internal components, or just normal wear over extended use.

Symptoms of a bad console assembly include:

• No power to control functions or display
• Faulty or non-functional buttons that do not press
• Inability to start or stop dishwasher cycles
• Touch screen no longer detects input selection
• Error codes appearing without cycle initiation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Color: Black

This electronic control board is the dishwasher's brain, managing cycles and powering the pump, valve, heater, and other loads. Replacing a failed board restores normal start, wash, drain, and dry functions.

• Coordinates and times wash cycles based on user selections and sensor inputs
• Sends power to the circulation pump, drain pump, water inlet valve, and heater
• Interfaces with the user interface and monitors door/latch status
• Failure may cause: no start, cycle won't advance or ends early, no fill/drain/heat, or error codes

• Disconnect power at the breaker before servicing; verify power is off
• Access location varies by model; commonly behind the lower toe panel or inside the console
• Handle the board by the edges and observe ESD (anti-static) precautions
• Move wire connectors one at a time from the old board to the new, secure the board, and reassemble; run any required diagnostics/reset per your model's tech sheet

Color: Stainless

This dishwasher keypad is the membrane touchpad behind the control console. It registers your button presses so you can select cycles and options. Replacing a failed keypad restores reliable button response and allows the dishwasher to start. What it does / symptoms:

• Provides the user interface for cycle and option selection
• Sends button-press signals through the ribbon connector to the electronic control
• Buttons are unresponsive or work intermittently
• Dishwasher won't start when Start/Reset is pressed
• Indicator lights may come on but controls don't respond to input

• One keypad

• Disconnect power at the breaker before servicing
• Access the console/door area to reach the keypad and control
• Carefully release the ribbon connector; avoid creasing or damaging it
• Ensure the ribbon is fully seated and correctly oriented in the control board connector before reassembly

This electronic control board is the dishwasher's main circuit board. It directs wash, drain, and dry functions and coordinates the user interface. Replacing a failed board restores responsive controls and reliable, complete cycles.

• Times and sequences wash, drain, and dry operations
• Distributes power to the circulation pump, drain pump, inlet valve, and heating circuit
• Monitors sensors and door switch; communicates with the display/indicator lights
• Common symptoms: won't start, unresponsive controls, cycles that stall or never advance, blinking lights or error codes

• Disconnect power at the breaker before servicing; verify no voltage is present
• Use ESD protection and handle the board by its edges
• Label/photograph connectors; transfer any mounting brackets or jumpers from the original board
• Some models require configuration/programming after install—follow the tech sheet stored inside the unit

This speed control regulates and stabilizes motor speed in your appliance. Replacing a faulty control restores smooth start-up and accurate speed selection so the motor runs consistently at the setting you choose.

• Modulates power to the motor to reach and hold the selected speed
• Helps correct issues like surging, stalling, or running only at one speed
• Common symptoms include erratic speeds, failure to start, or sudden speed changes
• Also presents as an unresponsive speed selector or inconsistent performance

• Disconnect power before servicing and allow components to discharge
• Access the control per your model's service information; note wire locations or take photos
• Transfer connectors one at a time; seat fully and handle electronics with ESD care
• Reassemble and test operation through all speed settings; perform any model-specific calibration if required

This electronic control board is the appliance's brain, directing power and timing to key components. Replacing a failed board can resolve unresponsive controls, erratic operation, or recurring error codes for reliable, consistent performance.

• Manages cycle logic and timing based on user selections and sensor inputs
• Distributes power to motors, heaters, valves, and other components as programmed
• Interfaces with the display and buttons to execute commands
• Flags faults and stores error codes when issues are detected
• Common signs of failure: won't start, blank or flickering display, erratic cycling, or repeated error codes

• Disconnect power before servicing; verify no voltage is present at the board
• Use ESD precautions—handle by the edges and avoid touching circuitry
• Transfer any brackets/covers and move wire connectors one at a time to maintain placement
• Some models require a post-install diagnostic or configuration step—follow the tech sheet for your unit