Dishwasher Kick Plate Screw Parts

This support is a refrigerator mounting bracket that stabilizes internal components and keeps assemblies aligned for reliable operation. It replaces worn or broken supports to help reduce rattling and improper panel fit. What it does

• Secures and aligns internal cabinet or component panels to prevent shifting during normal use
• Helps maintain proper spacing for doors, panels, or internal assemblies
• Reduces vibration or rattling caused by loose or damaged supports
• Commonly replaced when a support is cracked, broken, or no longer holds mating parts securely

• High-level replacement: typically accessible from inside the cabinet or behind a trim panel; exact steps depend on model
• Use proper tools and retain all fasteners during removal for reinstallation
• Disconnect power before servicing any electrical components or removing panels near wiring

Restore smooth, dependable rack movement. This kit replaces worn carriers and rollers so the lower dishrack glides in and out without binding, derailing, or dropping.

What it does

• Supports and guides the lower rack along the tracks
• Replaces broken, missing, or flat-spotted wheels and cracked carriers
• Helps prevent the rack from popping off the rails during loading
• Reduces drag that leads to stiff, uneven rack travel

What’s included
Four carrier brackets, four roller wheel brackets (covers), and eight wheels — a complete set of four assemblies.

Install notes

• Disconnect power before servicing the rack area.
• Pull the lower rack out; swap one assembly at a time to match left/right orientation.
• Fully seat tabs/locks on each carrier; verify wheels roll freely.
• Best practice: replace all four together for even tracking, then run a quick test cycle.

Note: Left Hand side

The Track, Asm (LH) is an OEM part for Whirlpool dishwashers. It is a left-hand side track assembly that supports and guides the dishwasher's upper rack as it slides in and out. This component is crucial for the smooth operation of the rack system, ensuring that dishes can be easily and securely positioned within the dishwasher. The track measures approximately 13.25 inches in length and 3.25 inches in width. 

Causes of a bad Track, Asm (LH) can include physical damage from mishandling, accumulated debris obstructing the track's pathway, or wear from frequent use which may lead to malfunction or stiffness in the rack's movement.

Symptoms of a bad Track, Asm (LH) include:

• Difficulty pulling the upper rack in and out
• The rack getting stuck or derailing
• Unusual noises when the rack is moved

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: Right Hand side

The Track, Asm (RH) is an OEM part for Whirlpool dishwashers. It is the right-hand side track assembly that supports and guides the dishwasher's upper rack as it slides in and out. This part ensures that the rack moves smoothly and securely, allowing for easy loading and unloading of dishes while preventing disruptions during the wash cycle.

Causes of a bad Track, Asm (RH) can include wear from regular use, accumulation of debris that impairs movement, or damage from improper loading of the dishwasher rack.

Symptoms of a bad Track, Asm (RH) include:

• Difficulty in sliding the upper rack in and out
• The rack becoming stuck or detaching from the track
• Noises such as grinding or clicking when the rack moves

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Upper Dishrack Track is an OEM part for Whirlpool dishwashers. This component is essential for the smooth and stable movement of the upper dishrack, allowing it to slide in and out.

Causes of a bad Upper Dishrack Track can include accumulation of debris that impedes the track's function, wear and tear from regular use, or damage from overloading the dishrack, which can lead to warping or cracking.

Symptoms of a bad Upper Dishrack Track include:

• Difficulty pulling out or pushing in the upper dishrack.
• The dishrack becoming stuck or derailing during movement.
• Unusual noises when moving the dishrack, such as grinding or clicking.
• Visible signs of wear or damage to the track.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Upper Spray Arm Mount is an OEM part for Whirlpool dishwashers. This component serves as a crucial connection point between the upper spray arm and the water supply tube within the dishwasher. The mount is designed to ensure the spray arm is securely attached and positioned correctly to distribute water evenly throughout the dishwasher during cycles.

Symptoms of a bad Upper Spray Arm Mount include:

• The spray arm becoming loose or falling off during operation.
• Inadequate water distribution leading to poorly cleaned dishes.
• Noticeable water leakage from the mount area during cycles.
• Visible wear or damage to the mount, such as cracks or breakage.

Causes of a bad upper spray arm mount can include mechanical stress from the rotation and water pressure, material fatigue over time, or damage from impact during loading and unloading of dishes.

This part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

PLEASE NOTE: Shaft is angled to match the bottom side of rack and mounts directly to the rack. On older design models part number WP8268812 will no longer be used.

The Water Supply Tube is an OEM part for Whirlpool dishwashers. This part ensures that water is efficiently delivered from the dishwasher's pump to the spray arms, which then distribute the water to clean the dishes.

Causes for issues with the water supply tube often involve physical damage, such as cracks or holes, clogging from food particles or mineral deposits, and wear and tear from regular use.

Symptoms of a malfunctioning Water Supply Tube include:

• Poor cleaning results due to inadequate water flow to the spray arms
• Water leaking from the dishwasher if the tube is cracked or damaged
• Unusual noises from the dishwasher, indicating issues with water distribution

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Upper Dishrack Rail is an OEM part for GE dishwashers. It supports the upper dishrack, allowing it to slide in and out smoothly for easy loading and unloading of dishes. This rail ensures that the dishrack remains stable and functions correctly during the wash cycle.

You should replace the upper dishrack rail if it becomes damaged or worn out. Over time, the rail can suffer from wear and tear due to the constant movement of the dishrack. Accidental impacts or bending can also compromise the integrity of the rail, leading to improper function.

Symptoms of a bad upper dishrack rail include:

• The upper dishrack not sliding in and out smoothly
• The dishrack becoming unstable or falling off the track
• Visible damage or bending of the rail
• Increased noise during the operation of the dishwasher

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Manifold is an OEM part for Whirlpool dishwashers. It distributes water evenly throughout the dishwasher during the wash cycle. The manifold ensures that water reaches all areas of the dishwasher, allowing for thorough cleaning of dishes. It measures approximately 13 inches in length and 3 inches in width.

Causes of a bad manifold can include clogging due to hard water deposits, damage from foreign objects within the dishwasher, or cracks and leaks from wear and tear over time. 

Symptoms of a bad manifold include:

• Poor cleaning performance
• Uneven water distribution
• Leaks inside the dishwasher
• Unusual noises during the wash cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Heating Element Nut is an OEM part for Frigidaire dishwashers. It plays a crucial role in securing the heating element in place, ensuring it functions effectively to heat water during the wash cycle. This component ensures the stability and proper operation of the dishwasher's heating element, contributing to the machine's overall efficiency and performance.

Causes of a bad part can include physical damage during maintenance or installation, corrosion over time due to exposure to water and detergents, or general wear and tear that affects its ability to securely hold the heating element in place.

Symptoms of a bad Heating Element Nut include:

• Loose heating element, leading to inefficient heating or water not heating at all
• Water leakage from the heating element area, potentially caused by a poor seal
• Unusual noises during the dishwasher cycle

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Middle Conduit Assembly is an OEM part for GE dishwashers, designed to facilitate the proper routing and distribution of water during the wash cycle. This part ensures that water is evenly distributed to the middle spray arm, providing effective and efficient cleaning of dishes placed on the middle rack. 

Causes of a bad middle conduit assembly can include clogs from food debris, mineral buildup from hard water, and physical damage due to regular use or improper loading of dishes. These issues can impede water flow, reducing the dishwasher’s cleaning efficiency.

Symptoms of a bad Middle Conduit Assembly include:

• Poor cleaning performance, especially with dishes on the middle rack
• Water not reaching the middle spray arm
• Unusual noise during the wash cycle, indicating a disruption in water flow

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dishwasher Control Panel is an OEM replacement part for GE dishwashers. This panel houses the selection buttons and display for programming and monitoring the dishwasher’s wash cycles.

Causes of a bad control panel can include electrical issues, exposure to moisture, or physical damage from regular use. Over time, the buttons may wear out or become unresponsive, and internal components can fail due to power surges or corrosion.

Symptoms of a bad control panel include:

• Unresponsive buttons or touch controls
• The display not illuminating or showing incorrect information
• The dishwasher not starting or stopping mid-cycle
• Error messages on the display

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lower Spray Arm Base is an OEM part for GE dishwashers. Located inside the dishwasher tub, this part attaches securely to hold and rotate the lower spray arm during wash cycles. The spray arm works together with the rotating base to provide thorough lower rack coverage with water and dishwasher detergent.

Symptoms of a bad lower spray arm base include:

• Inadequate cleaning of lower rack dishes
• Dirt or food particles left behind after cycles
• Loose or detached lower spray arm

Causes of a bad lower spray arm base can be wear over many cycles of use. Damage may occur from impact with dishes or utensils loaded incorrectly. Regular mineral buildup on the connectors also reduces efficient spinning.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Screw Kit (Inner Door) is an OEM part for Bosch dishwashers. It is a comprehensive kit that includes 6 screws required for securing and maintaining the inner door assembly of the dishwasher.

Symptoms of needing a new screw kit:

• Loose or rattling inner door panels
• Inner door components becoming misaligned or detached
• Water leaks or vapor escaping from the inner door area
• Difficulty in opening or closing the dishwasher door smoothly

Causes of a bad screw kit can include missing or stripped screws, corrosion or wear over time, or damage during repair or maintenance work.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwasher models.

The Dishwasher Access Panel is an OEM part for Whirlpool dishwashers. This panel covers the lower front section of the dishwasher, providing a finished look while protecting internal components from debris and damage.

Causes of a bad access panel include accidental impacts, wear and tear over time, or exposure to moisture, which can lead to rust or corrosion.

Symptoms of a bad access panel include:

• Visible cracks or dents
• Rust or discoloration
• Loose or misaligned panel

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Base Panel is an OEM part for Bosch dishwashers. This part is located at the bottom front of the dishwasher, serving both functional and aesthetic purposes. It helps protect internal components from dust, debris, and moisture, while also providing a finished look to the appliance.

Causes of a bad base panel can include physical damage from impacts, corrosion due to exposure to moisture, and wear and tear over time.  

Symptoms of a bad base panel include:

• Visible cracks, dents, or holes in the panel
• The panel becoming loose or falling off
• Increased noise during dishwasher operation
• Internal components being exposed to dust and moisture

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.