Refrigerator Control Panel Lcd Parts

This OEM part is a refrigerator dispenser interface. The dispenser interface is responsible for the main functions of the refrigerator, such as adjusting the temperature settings as well as the other functions that are displayed on the interface. If the refrigerator is no longer cooling efficiently, failing to maintain temperature, dispensing water, or the touchpad is unresponsive, the interface might need to be replaced. Thankfully, replacing this part is not a difficult process.To replace the old interface, make sure that all power to the refrigerator is turned off. Open the refrigerator door and remove the door panel of the interior of the refrigerator. Locate the old control board and remove the wire harnesses that connect to it. Take note of the wire connector's orientation and reinsert the wires to the new board. Snap the new interface back in place and reinstall the inner panel. This genuine replacement part is sold individually and is compatible with General Electric, Hotpoint, and RCA brand refrigerators.

This replacement inner door panel restores the interior surface of the door. It supports door bins/shelves and provides a stable surface for the door gasket to seal, helping keep cold air in and items secure.

• Forms the interior face of the door and supports door bins/shelves
• Provides the gasket with a flat surface to help maintain a proper seal
• Replace if cracked, warped, or separating from the door frame
• Common symptoms include loose/falling door bins, visible damage, or air leaks/frost near the door

• Disconnect power and empty items from the door before service
• Remove the door per the appliance manual and lay it flat to prevent twisting
• Transfer the door gasket and any reusable hardware from the old panel if applicable
• Install the new panel and tighten fasteners evenly; verify the gasket seals all around

Due to manufacturer changes harness supplied in kit must be used. On refrigerator models manufactured prior to 2016, the dispenser board may also need to be replaced.

This cold control kit is the refrigerator temperature control assembly that helps regulate cooling cycles so your unit maintains the selected temperature. Replacing a failing control can restore more consistent cooling and user temperature adjustment. What it does:

• Regulates the appliance's cooling cycles and temperature setpoint to help keep food properly chilled
• Replaces a worn or erratic temperature control that can cause inconsistent temperatures
• Common symptom: appliance runs continuously, doesn't cycle off, or temperatures are too warm or fluctuate
• Works as the OEM replacement control assembly for models that use this kit

• Disconnect power to the appliance before starting any repair
• Take photos of wiring before removal to ensure correct reconnection
• Use basic hand tools; avoid forcing connectors or mounting tabs

This electronic control board is the appliance's central controller, directing power and timing to key components. Replacing a failed board can resolve unresponsive controls, cycles that won't start or advance, no display, or recurring error codes.

• Distributes power and manages timing for motors, pumps, fans, heaters, and valves
• Interprets inputs from sensors and switches to execute programmed operations
• Stores and runs the appliance's control logic and settings
• Common failure symptoms: no power/display, won't start, stops mid-cycle, intermittent operation, or error codes

• Disconnect power at the breaker or unplug the appliance before servicing
• Use ESD precautions; handle the board by the edges only
• Photograph wiring and move connectors one at a time to the new board
• Some models require configuration or programming after install—follow the service/tech sheet for your unit

The defrost timer controls your refrigerator's automatic defrost cycle, periodically pausing cooling to power the defrost heater. Replacing a faulty timer restores proper defrosting to help prevent frost buildup, temperature swings, and excessive run time.

• Advances the system between cooling and defrost at set intervals
• Sends power to the defrost heater, then returns the unit to cooling
• Failure may cause heavy frost on evaporator coils and weak airflow
• Fresh food section may run warm while the freezer ices over
• Unit may run constantly, never defrost, or get stuck in defrost

• Disconnect power before servicing
• Location varies by model; access the timer (often in the control housing or rear compartment), note wire positions, and transfer one at a time
• Mount and secure the timer as originally installed; reuse existing bracket/fasteners
• After reassembly, restore power and verify the unit advances through cooling and defrost

The PC Board is an OEM part for Frigidaire refrigerators. It serves as the control center of your refrigerator, allowing you to adjust settings, monitor temperatures, and access various functions.

A bad PC board can be caused by electrical issues, component failure, or damage. When the user interface and display board become faulty, it can result in issues such as unresponsive controls, inaccurate temperature readings, or a blank display.

Symptoms of a bad PC include:

• Unresponsive buttons or controls on the refrigerator
• Inaccurate temperature readings or inconsistent display
• Blank or flickering display

Replace your faulty PC board with this genuine OEM Frigidaire part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Note: Includes PCB Display

The Freezer door assembly is essential for maintaining the efficiency of your bottom-mount refrigerator. This genuine OEM part ensures a snug and reliable seal, preventing cold air from escaping and keeping your freezer at the optimal temperature. By effectively insulating the door, it helps reduce energy consumption, which can lead to lower utility bills and a more eco-friendly household. The durable design of the seal assembly withstands daily use, ensuring long-lasting performance and protecting your food from freezer burn. Compatible with a variety of Samsung bottom-mount refrigerator models, this door seal assembly is straightforward to install, allowing you to restore your applianceGÇÖs functionality with ease. Whether replacing a cracked, worn, or damaged seal, the Refrigerator Freezer Door Seal Assembly provides a dependable solution to keep your refrigerator running smoothly and your items fresh.

Includes door assembly and internal latch parts.

This cold control thermostat regulates your refrigerator's temperature by cycling cooling on and off based on air temperature at the sensing bulb. Replacing a worn control restores accurate settings and consistent cooling performance. What it does:

• Monitors compartment temperature via a capillary sensing bulb
• Opens/closes electrical contacts to start and stop the compressor (and related cooling circuits)
• Helps maintain the temperature you set on the control dial
• Failure symptoms include: unit too warm or too cold, runs continuously, won't start until the knob is moved/tapped, or erratic temperature swings

• 1 thermostat

• Disconnect power before servicing; wear cut-resistant gloves
• Note wire positions or take a photo; transfer the dial/shaft and any mounting hardware from the old control if reused
• Route the capillary bulb exactly as original; do not kink, pinch, or cut it; secure with existing clips
• After install, set to a mid setting and allow up to 24 hours for temperatures to stabilize

This mechanical temperature control thermostat regulates your unit's cooling by cycling the compressor on and off to maintain the set temperature. Replace a failed cold control when temperatures drift, cycling is erratic, or the knob no longer responds.

• Monitors cabinet temperature via a sensing bulb and opens/closes electrical contacts to control cooling
• Helps restore consistent temperatures and normal run times
• Typical failure symptoms: too warm or too cold, runs constantly or won't start, no change when adjusting the control
• May cause intermittent cooling or short cycling as it wears

• Disconnect power before servicing
• Access the control housing; note/photograph wire locations and transfer them one at a time
• Route the sensing capillary exactly as original; do not kink or sharply bend the tube; secure the bulb in its original location
• Set the control to a mid setting and allow temperatures to stabilize before fine-tuning

The Refrigerator Main Control Board is essential for the optimal performance of your Samsung refrigerator. This genuine OEM part ensures seamless control over your applianceGÇÖs various functions, including temperature regulation, cooling cycles, and display operations. Designed specifically for Samsung refrigerators, this control board guarantees a perfect fit and reliable operation. By replacing a faulty main control board with this genuine OEM part, you can restore your fridgeGÇÖs performance without compromising on quality. The durable and precisely engineered assembly facilitates easy installation, allowing you to manage repairs independently and save on service costs. With consistent power distribution and efficient management of your refrigeratorGÇÖs components, the Refrigerator Main Control Board enhances the overall efficiency and longevity of your appliance. Trust in this genuine OEM part to provide dependable performance, ensuring your Samsung refrigerator functions smoothly and keeps your food fresh.

Replacement LED assembly restores screen illumination by replacing the TV's failed LED strips. Use this part to address dim, flickering, or uneven backlighting and improve overall picture visibility. What it does:

• Replaces the TV's backlight LED strips to restore even panel illumination.
• Commonly used when the screen is dim, has dark bands or spots, or the backlight flickers or fails while a faint image remains.
• Fits into the original LED channels and connects to the existing LED driver/board (direct-fit replacement when matched to correct model).
• Does not address unrelated failures such as main board, power supply, or panel matrix faults.

• Disconnect power and allow the TV to sit unpowered before starting—work only when fully de-energized.
• Handle the LCD panel and assembly carefully to avoid pressure damage; wear ESD protection when available.
• Verify LED operation before full reassembly (power up with the panel/coverings off only if you are comfortable and it's safe to do so).

This temperature control thermostat regulates the fresh food compartment, cycling cooling on and off to maintain your setting. Replace it if the refrigerator section won't stay cold, overcools, runs constantly, or the dial no longer responds. What it does

• Monitors refrigerator (fresh food) compartment temperature via the sensing bulb/capillary
• Opens and closes electrical contacts to control the cooling system as needed
• Helps maintain consistent temperature at the selected setting
• Common symptoms of failure: warm fridge, food freezing in fresh food section, runs nonstop or short-cycles, unresponsive or no "click" at the dial

• 1 thermostat

• Disconnect power before servicing; work with dry hands
• Note/photograph wire positions and transfer to matching terminals; reuse original mounting hardware
• Route the sensing capillary exactly as original; avoid sharp bends or kinks and secure the bulb in its clip
• After installation, set to mid setting and allow up to 24 hours for temperatures to stabilize

3 pin 60 minute

This refrigerator temperature control thermostat regulates cooling by sensing the compartment temperature and switching the compressor on and off. Replacing a worn control restores consistent temperatures and proper cooling cycles. What it does

• Senses fresh food compartment temperature and responds to your dial setting
• Opens/closes electrical contacts to start and stop the cooling system
• Maintains target temperature within the control's range
• Common symptoms: refrigerator too warm or too cold, runs constantly, won't start cooling, temperature doesn't change with the knob

• Includes 1 temperature control thermostat

• Disconnect power before servicing; wear appropriate gloves
• Access the control in the fresh food control housing; remove the cover and knob as needed
• Note wire positions; transfer wires and any bracket exactly as found
• Carefully route the sensing tube in the original path without kinking; set to a mid setting and allow 24 hours for temperatures to stabilize