Refrigerator Can-Air Control Board Parts

The Defrost Timer is an OEM replacement part for Frigidaire refrigerators. Located within the control housing inside the fresh food section, it controls the defrost cycles to clear frost from the evaporator coils.

Causes of timer malfunction include: cracking/fatigue of plastics from extended usage; breakdown of delicate electronic components over many years of operation; and failures inhibiting regulated defrost intervals.

Symptoms of a failed defrost timer include:

• Refrigerator fails to automatically initiate scheduled defrost periods
• Frost/ice builds up excessively on evaporator coils obstructing airflow
• Erratic refrigerator temperatures as heat exchange degrades
• Refrigerator stuck in the defrost cycle
• Compressor is not running

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore ranges.

The Compressor Inverter Board is an OEM part for GE refrigerators. It controls the operation of the compressor, adjusting its speed to optimize cooling efficiency and energy consumption. This component is crucial for maintaining consistent temperatures inside the refrigerator and ensuring smooth, reliable performance.

Causes of a bad compressor inverter board can include electrical surges, overheating, or component failure due to wear and tear. When the inverter board malfunctions, it can lead to inadequate cooling and increased energy usage.

Symptoms of a bad Compressor Inverter Board include:

• Refrigerator not cooling properly
• Unusual noises coming from the compressor
• The compressor running continuously or not running at all
• Error codes or flashing lights on the control panel

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This electronic control board manages your refrigerator's key systems—compressor, fans, and defrost. When the original board fails, you may see warm temperatures or erratic behavior; replacing it restores stable cooling and proper defrosting.

• Regulates compressor and fan operation to maintain set temperatures
• Controls adaptive defrost timing and energizes the defrost heater
• Distributes power to critical loads and processes sensor inputs
• Helps with: no cooling or intermittent cooling, compressor/fans not running, heavy frost from no defrost, or unresponsive/erratic controls

• Disconnect power before servicing; risk of electric shock
• Use ESD protection; handle the board by the edges only
• Photograph and label connectors; transfer wires exactly and fully seat each plug
• After installation, restore power and follow any model-specific service sheet/configuration steps provided with the appliance

The Thermostat is an OEM part for Whirlpool refrigerators. It regulates the temperature inside the refrigerator and freezer compartments by controlling the cooling cycles, ensuring food and beverages are kept at the desired temperature.

Over time, thermostats can fail due to electrical malfunctions, wear and tear, or exposure to fluctuating temperatures. A faulty thermostat can disrupt the cooling process, leading to inconsistent temperatures.

Symptoms of a bad thermostat include:

• Refrigerator or freezer too warm or too cold
• Inconsistent temperature maintenance
• Refrigerator running continuously or not at all
• Spoiled food due to improper cooling

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Defrost Control Board is an OEM replacement part for Whirlpool refrigerators. This circuit board coordinates defrost heating cycles to remove built-up frost from evaporator coils.

Causes relate to water damage following leaks, component failure due to power surges loosening connectors, or general component wear over time.

Symptoms of issues include:

• Frost accumulation on interior freezer walls reducing capacity
• Food freezing underneath heavy buildup layers
• Inoperable heating element failing to restore airflow

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

The Dispenser Control Board is an OEM part for Frigidaire refrigerators. It is located behind the control panel of the refrigerator and communicates with other components to activate the dispenser mechanisms. It enables the user to select and dispense ice or water as desired.

Causes of a faulty dispenser control board can include electrical malfunctions, component failure, or improper handling. These factors can result in issues such as the dispenser not responding to user input, incorrect dispensing amounts, or complete failure of the dispenser functions.

Symptoms of a bad dispenser control board may include:

• Inability to dispense ice or water
• Incorrect dispensing amounts or inconsistent operation
• Error codes or flashing lights on the dispenser panel

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Control Board is an OEM part for Whirlpool refrigerators. This electronic component manages and regulates the various functions of the refrigerator, including temperature control, defrost cycles, and the operation of fans and compressors. It ensures the refrigerator maintains the optimal environment for preserving food.

Over time, the control board can fail due to electrical issues, power surges, or general wear and tear. A malfunctioning control board can disrupt the refrigerator's operations and affect its performance.

Symptoms of a bad fridge control board include:

• Inconsistent or incorrect temperatures
• The refrigerator not cooling properly
• Error codes displayed on the control panel
• Unresponsive or malfunctioning control settings

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Defrost Control Board is an OEM part for GE refrigerators. This component manages the defrost cycle, ensuring that the refrigerator and freezer compartments remain frost-free and maintain optimal cooling performance.

Causes of a bad defrost control board can include electrical surges, component failure due to wear over time, or damage from moisture exposure. A faulty board can lead to inefficient defrost cycles or prevent the defrost process from occurring altogether.

Symptoms of a bad Defrost Control Board include:

• Frost buildup in the freezer
• Refrigerator or freezer not cooling properly
• Frequent cycling of the defrost heater
• Water leaks inside the refrigerator

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Main Control Board Assembly is an OEM replacement part for GE refrigerators. This board controls and monitors all critical functions including temperature regulation and cycle operation.

Symptoms of a bad control board include:

• Refrigerator failing to cool or freeze properly
• Door alarms or error codes displayed
• Lights or other features ceasing to operate

Causes can be short circuits, liquid damage to circuitry, or failure of electronic components due to prolonged use. Defects are often not repairable and replacement is necessary.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

The Defrost Timer is an OEM part for Frigidaire refrigerators. It regulates the automatic defrost cycle of the freezer, preventing the buildup of frost and ice on the evaporator coils.

A bad defrost timer can be caused by electrical issues, component failure, or malfunctioning mechanisms. When the timer becomes faulty, it can result in issues such as excessive frost buildup, poor cooling performance, or a constantly running compressor.

Symptoms of a bad defrost timer include:

• Frost or ice accumulation in the freezer
• Inadequate cooling in the refrigerator 
• Constantly running compressor 

Replace your faulty defrost timer with this genuine OEM Frigidaire part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Dispenser Control Board Kit is an OEM part for Whirlpool refrigerators. This kit includes the control board responsible for regulating the functions of the dispenser, such as dispensing water and ice, and often includes associated wiring and components for installation.

Causes of a bad dispenser control board can include electrical surges, wear and tear over time, or exposure to moisture, which can interfere with the electronic controls.

Symptoms of a bad dispenser control board kit include:

• The dispenser not responding to inputs
• Inconsistent or no dispensing of water or ice
• Display errors or malfunctioning indicator lights
• The dispenser operating erratically or not at all

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The LED Control Board is an OEM replacement part for Whirlpool refrigerators. This board houses the electronic components that power and operate the LED lighting inside the refrigerator and freezer.

Symptoms of a bad control board include: 

• Lights flickering, flickering, or failing to illuminate fully  
• Inconsistent or unresponsive lighting that does not turn on as needed
• Excessive power usage or overheating of the lights

Causes can be a result of damage from moisture exposure, power surges, or faulty electronic components over an extended period of use. This OEM board directly replaces the original for dependable lighting performance.

This Whirlpool part is also compatible with KitchenAid, Jenn-Air, Crosley, Amana, and some Kenmore refrigerator models as well.

The Main Control Board Assembly is an OEM part for GE refrigerators. This part manages various functions such as temperature regulation, defrost cycles, and the operation of fans and compressors. 

Causes of a bad control board include electrical surges, component wear and tear, or moisture damage.  

Symptoms of a bad main control board include:

• Refrigerator or freezer not cooling properly
• Erratic temperature fluctuations
• Unresponsive control panel
• Unusual noises or failure of fans and compressors to run

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The User Interface is an OEM replacement part for Frigidaire refrigerators. It is the digital control panel that allows for monitoring temperature settings and adjusting other functions.

Symptoms of a bad user interface include:

• Frozen or unresponsive touch buttons  
• Illegible or blank LED screen
• Inability to power on or adjust refrigerator settings
• Temperature display showing incorrect readings

Causes of a bad user interface can include failures in the electronic components from condensation or liquid spills over time. Physical damage to the wiring or circuit boards is another potential cause.

This part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Refrigerator Thermostat is an OEM replacement part for Whirlpool refrigerators. This part monitors and maintains the temperature inside the appliance.

Causes typically relate to normal component degradation over extended use.

Symptoms of a faulty thermostat can include:

• ineffective or fluctuating interior conditions
• higher than normal energy usage
• intermittent compressor cycling
• potentially complete cooling loss in extreme cases

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

Note: This part is often misdiagnosed and requires electrical testing using a volt/ohm meter.

Important: When replacing this main board, if it does not power on or make a connection, you will also have to replace the display board. The display boards for some models are no longer available. Please refer to your specific model for the correct display board and availability.