Washer Water Dispenser Control Lcd Parts

This main control board is the washer's central electronic brain, coordinating cycles, motor and valve operation, and safety checks. Replacing a failed board can restore normal starts, fills, agitation/spin, and reliable cycle completion.

• Manages cycle timing and power to the drive motor, drain pump, and water inlet valves
• Monitors inputs from the lid lock and other sensors for safe, accurate operation
• Interfaces with the user controls to run the selected wash program
• Typical failure symptoms: won't start or power up; no fill/agitate/spin/drain; stops mid-cycle; error codes or unresponsive controls

• Disconnect power before servicing and handle the board with ESD protection
• Access the control at the top/rear area, transfer connectors one at a time to the same positions, and secure the board in the original mounting
• After installation, restore power and run the unit's diagnostic/service mode to verify operation; some models may require a configuration/personality step per the tech sheet

The Motor Control Board is an OEM part for Whirlpool washing machines. This electronic board is responsible for regulating and controlling the motor's speed and direction during various cycles, ensuring optimal washing performance.

Over time, the motor control board can fail due to electrical issues, power surges, or general wear and tear. When the control board malfunctions, it can disrupt the washing machine's operation and lead to various performance issues.

Symptoms of a bad motor control board include:

• The washer not spinning or agitating
• Erratic or unpredictable cycle times
• The washer stopping mid-cycle
• Error codes related to motor function

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Washer Dispenser Drawer is an OEM replacement part for Whirlpool washing machines. It is a removable compartment designed to hold and dispense detergent, fabric softener, and other laundry additives during the wash cycle.

Symptoms of a faulty dispenser drawer include:

• Detergent or fabric softener not being dispensed properly
• Clogging or leaking from the dispenser drawer
• Difficulty opening, closing, or removing the drawer

Causes of a bad dispenser drawer can range from buildup of residue or blockages, damage to the drawer components or latch mechanism, or normal wear and tear over time.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models. 

The washer timer is an OEM part for GE washing machines. This timer controls the various cycles of the washing machine, including wash, rinse, and spin cycles. By regulating the duration and sequence of each cycle, the timer ensures that the washing machine operates smoothly and efficiently.

Causes of a bad timer washer can include electrical failures, wear and tear from regular use, or internal mechanical issues. A faulty timer can lead to problems with the timing and execution of the wash cycles, potentially leaving clothes unwashed or causing the machine to stop unexpectedly.

Symptoms of a bad timer washer include:

• The washer not advancing through cycles
• The washer stopping mid-cycle
• Inconsistent or incorrect cycle timing
• The timer knob not turning or becoming stuck

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dispenser Actuator is an OEM part for Whirlpool washing machines. It is responsible for controlling the release of detergent and fabric softener during the wash cycle, ensuring that these cleaning agents are dispensed at the correct times.

Causes of a bad dispenser actuator can include wear and tear over time, damage from detergent residue build-up, or electrical faults within the actuator mechanism. If the actuator fails, it can disrupt the washing cycle and prevent proper dispensing of cleaning agents.

Symptoms of a bad dispenser actuator include:

• Detergent or fabric softener not being dispensed
• The washer displaying error codes related to the dispenser
• Intermittent or inconsistent dispensing
• Unusual noises during the dispensing phase

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Detergent Box Assembly is an OEM replacement part for LG washing machines. This assembly is responsible for holding and dispensing detergent and other laundry additives during the wash cycle. It ensures that the correct amounts of detergent, bleach, and fabric softener are released at the appropriate times, contributing to effective cleaning and care of your clothes.

Over time, the detergent box assembly can become worn out or damaged due to continuous exposure to water and detergent. Buildup of detergent residues can clog the compartments, and the mechanical parts of the assembly can also degrade. 

Symptoms of a bad detergent box assembly include:

• The detergent, bleach, or fabric softener not dispensing properly
• Visible cracks, warping, or damage to the box
• Residues remaining in the compartments after a wash cycle
• Leaks from the detergent box area
• Error messages related to dispensing issues

This OEM LG part is also compatible with some Sears/Kenmore washing machine models.

The Dispenser Drawer Handle is an OEM part for Frigidaire washing machines. It is designed to provide a sturdy grip and easy access to the detergent dispenser drawer. It allows for the convenient adding of detergent, fabric softener, or bleach to the dispenser. 

A bad Dispenser Drawer Handle can occur due to regular wear and tear, accidental damage, or excessive force applied during use. If the handle becomes loose, cracked, or broken, it can make it difficult to open or close the dispenser drawer smoothly.

Symptoms of a bad Dispenser Drawer Handle include:

• Difficulty in opening or closing the drawer.
• Loose or wobbly handle.
• Visible cracks or breakage in the handle.
• Inability to securely grip the handle.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Dispenser Drawer is an OEM replacement part for Whirlpool washing machines. This component holds and dispenses laundry detergent, fabric softener, and bleach into the washer during the appropriate cycle. It ensures accurate distribution of cleaning agents, contributing to effective washing performance.

Symptoms of a bad Dispenser Drawer include:

• Detergent, bleach, or fabric softener not dispensing properly
• Residue buildup in the drawer after the cycle
• The drawer being stuck, difficult to open or close, or visibly damaged

Causes of a failing Dispenser Drawer can include clogs from detergent residue, warping or cracking from long-term use, or mechanical issues with the drawer’s sliding mechanism. Regular cleaning can help prevent issues but eventual wear may require replacement.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Fabric Softener Dispenser is an OEM part for GE washing machines. This dispenser ensures the accurate distribution of fabric softener into the wash cycle, allowing for even softening of your laundry. It releases fabric softener at the appropriate time, enhancing the washing process and leaving clothes feeling soft and fresh.

Causes of a bad dispenser can include clogs or blockages from fabric softener residue, wear and tear from frequent use, or mechanical failure within the dispenser components.

Symptoms of a bad fabric softener dispenser include:

• Fabric softener not dispensing during the wash cycle
• Residue or buildup in the dispenser compartment
• Leaks or drips from the dispenser area
• Clothes not feeling as soft as usual after washing

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dispenser Assembly is an OEM part for LG front-loading washers. It is responsible for dispensing detergent and fabric softener at the appropriate times during the wash cycle. The dispenser assembly contains separate compartments for detergent and fabric softener, as well as timed mechanisms that release each additive when needed for cleaning and softening results.

Causes of a bad dispenser assembly can include issues with the dispensing mechanisms like clogging, jamming, or malfunctions preventing the timely release of detergent and softener. Damage to compartment seals or lids could also cause improper dispensing.

Symptoms of a bad dispenser assembly include:

• Residue or buildup of detergent in the drum or tub
• Strong detergent or fabric softener odors that won't come out of clothes
• Dispenser drawers, lids, or seals that do not close or lock securely

This OEM LG part is also compatible with Sears/Kenmore.

This main control board replaces the washer's primary electronic controller to restore cycle selection and timed operations. It re-establishes the washer's command logic so cycles start, advance, and end correctly. What it does:

• Interprets user inputs and runs the wash cycle sequence (fill, agitate, drain, spin)
• Controls timers, motor relay signals, and valve/actuator commands
• Can resolve symptoms like no cycle start, stuck or repeating cycles, unresponsive controls, or erratic behavior
• Works with related sensors and switches to coordinate machine functions

• One main control board

• Disconnect power before servicing to avoid shock or board damage
• Handle the board by edges and avoid static discharge; use ESD protection if available
• Verify connector positions and seating; transfer any required standoffs or mounting hardware from the old board

The Noise Filter Assembly is an OEM part for LG washing machines, designed to minimize electrical noise interference within the appliance. This essential component ensures that the washer operates smoothly without emitting disruptive sounds that can affect both the performance of the washer and the comfort of your home environment. 

Causes of a bad Noise Filter Assembly can range from wear and tear over time to exposure to power surges or electrical spikes, which can damage the internal components of the filter. 

Symptoms of a bad Noise Filter Assembly include:

• Increased electrical noise or buzzing sounds emanating from the washer
• Intermittent disruptions in the washer's performance
• The washing machine failing to start or experiencing power fluctuations

This OEM LG part is also compatible with some Kenmore models.

The Fabric Softener Dispenser is an OEM replacement part specific to  Whirlpool washing machines. It is responsible for accurately dispensing the appropriate amount of liquid fabric softener during the rinse cycle to soften and protect clothes. 

Causes of a bad fabric softener dispenser can include clogging of the dispenser or dispensing mechanisms from residue buildup, cracks or openings in the plastic housing allowing for leaks, broken or malfunctioning electronic components controlling the dispensing process.

Symptoms of a bad fabric softener dispenser include:

• Improper dispensing of fabric softener resulting in excess or insufficient softener  
• Leaking or dripping of softener from the dispenser housing
• The dispenser door or lid not opening or closing properly
• Liquids dispensing at the wrong times during cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

The Liquid Fabric Softener Dispenser is an OEM part for Whirlpool washing machines. It is designed to dispense fabric softener at the appropriate time during the wash cycle, ensuring that your laundry comes out soft and fresh. This liquid fabric softener dispenser fits most 1984 and newer 24 and 27 inch washing machines. This part inserts into the top of the agitator. Laundry bag AP4354945 is also recommended to prevent damage to delicates clothing.

Causes of a bad fabric softener dispenser can include clogs from fabric softener residue, wear and tear from regular use, or mechanical failure of the dispenser mechanism. If the dispenser is not functioning correctly, it can lead to ineffective softener distribution.

Symptoms of a bad fabric softener dispenser include:

• Fabric softener not dispensing during the cycle
• Residue buildup in the dispenser compartment
• Leaks or drips from the dispenser
• Fabric softener remaining in the dispenser after the cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Washer Dispenser Assembly is an OEM part for Whirlpool washing machines. It is responsible for dispensing the detergent and fabric softener at the appropriate times during the wash cycle. This assembly ensures that cleaning agents are released properly, contributing to effective and efficient washing performance.

Causes of a bad washer dispenser assembly can include clogging from detergent or fabric softener buildup, damage to the dispenser mechanism, or electrical malfunctions that prevent proper operation.

Symptoms of a bad washer dispenser assembly include:

• Detergent or fabric softener not dispensing correctly
• Residue left in the dispenser drawer
• Poor cleaning results
• Leaks around the dispenser area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Electronic Control Board is an OEM component for Whirlpool washing machines. It governs essential operations like cycle selection, water levels, spin speeds and more.

Causes of a faulty control board can include liquid damage, power surges, or standard component wear over time under regular operation.

Symptoms include:

• Inability to select or change washing cycles 
• Issues with the display, lights or buttons
• The washer failing to fill or spin properly
• Repeated error codes or immovable cycles

This Whirlpool OEM replacement control board restores full and reliable functionality, compatible with KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models as well.