Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Drives drum rotation for even drying. Replace if dryer won't spin, makes squealing sounds, or clothes stay wet. Confirm fit with your model number.
From watching the video I got the general idea, disassemble 50% of the dryer. Only had 2 differences in my dryer from the one used in the video, so the video was helpful. The one difference was the connections to the front side of the dryer were on the power distribution circuit board located on the left of the dryer under a sheet metal cover. These were harder to disconnect with my fat thumbs. The bigger issue was with removing the front control panel. In the video there doesn't appear to be... Read more
Dryer not heating or drying inconsistently? A faulty thermistor causes temperature control issues. Direct repair—moderate difficulty, 30-45 minutes.
You can do this! Although an Art Director by trade, I like working with my hands. I’m adept at working with tools and following instructions. In today’s disposable society, I prefer fixing things. That said, this has to be the easiest repair I’ve ever attempted with the largest cost-savings versus hiring a professional. My brand new dryer had been in use fewer than six months (average 6 loads per week) when suddenly the dryer would not heat. The drum would spin, there were no error codes, and... Read more
Maintains belt tension in your dryer drum system. Replace if the pulley wheel is worn, cracked, seized, or the tensioner arm is bent or broken.
Dryer won't start or overheats? A faulty thermostat often causes these issues. This thermal cutoff part regulates temperature safely. DIY fix in 30-50 min.
Supports and allows the dryer drum to rotate smoothly. Replace when roller bearing seizes, develops flat spots, or shows wear causing noise or drag.
I first researched on AppliancePartsPros.com the availability of parts. It looked like all common parts were in stock ready to ship. I also found that APP had several helpful videos to show how to take apart the dryer and replace the parts. Other research indicated the most common problem is the drum rollers, but after seeing the videos I determined that not only the rollers but also the tensioner pulley could be bad and the belt too. So I bought all of these parts because I did not want to... Read more
Clothes still damp after the cycle? A faulty moisture sensor causes over-drying or under-drying. DIY repair in 10 minutes with our video guide.
I researched the issue on You tube and found out it could be either the "belt broke switch" or the Moisture sensor. A friend who was an appliance mechanic advised "since you have to take it all apart anyways, its best to replace the belt, spring, and Idler wheel" I bought the 5 item for $52. I watched the video on the AppliancePartsPros for changing out the belt and I replace all items on the list. Took 1 1/2 hrs and was fixed on restart!! * Wear gloves, the sheet metal is very sharp edges!* Read more
Holds the lint screen and channels exhaust air through the filter. Replace if cracked, broken, or no longer securely holding the screen. Verify fit by model.
Found AppliancePros online and identified parts. Parts ordered, received in a few days and installed parts. Easypeasy....! Thank You Dave Read more
Maintains tension on the idler pulley to keep the drum belt tight. Replace if the spring is stretched, broken, or missing to restore proper belt operation.
Replace your broken, cracked, or missing dryer control knob encoder assembly. Mounts to the front control panel for precise cycle selection control.
Ordered new control knob and replaced broken one. The most difficult part was popping out the control panel so I could access the control knob. I ended up "wrestling" it out. It would be wonderful if the product manual had some guidance on how to pop out all panels. Read more
Motor hums but won't start? Replace your dryer drive motor to fix startup failure. Moderate DIY repair with video guide. Restores drum rotation.
After watching the how to video twice I decided to embark on dismantling my dryer and attempting to replace my motor. After realizing that the main tool needed was a Phillips screwdriver I was sure I could handle this repair. One by one I took apart the dryer and spread out the parts throughout my mud room. 1.5 hrs later and I have a working dryer, and most of all a happy wife. Thanks for the speedy part delivery and the great how to video. Read more
Dryer won't start or keeps running with door open? The door switch detects door position for safe operation. DIY-friendly repair with video guide.
I am so blessed. I went online. Found the brackets. Watch the video for the brackets I chose. And lucky me. I did not have to pull the dishwasher out. The installer did not have it flush under the counter. So I was able to pull the dishwasher forward unhook the damage brackets and insert the new. Put the dishwasher back in. Two screws. Now the balanced and secure dishwasher washes better than ever and I did not have to pay an extraordinary fee for a repairman. I'm 68 and take care of a 72 year... Read more
Dryer won't heat or stops heating mid-cycle? The high limit thermostat cuts power when temperatures spike. Easy 15-minute fix with video guide.
When starting my dryer the motor would power up and rotoe the drum and blower. Afetr about 20-30 seconds the igniter would come on then the gas valve would open and I would get heat for about 6 or 7 seconds then it would shut off. I know the burner is suppoed to cycle on and off but once the burner shut off it would not come bqack on unless I shut the dryer off and then back on. I checked for continuity on the thermistor, the thermal fuse and the high temp sensor. All three of them appeared to... Read more
Replaces broken or cracked lint filter cover on your dryer. Covers the filter opening when filter is removed to prevent clothes from entering the blower.
Dryer not heating? The igniter lights the gas burner to generate heat. This fragile ceramic part can crack or break during installation. DIY repair.
Replaced the following parts but did not fix the problem: -Thermister -Thermal fuse -Radiant sensor -Ignitor -Therm The problem was the Centrifugal switch. Took the switch apart and use fine grid sand paper to clean the contacts. Put it back and working. Read more
Secures the lint filter cover in your dryer. Replace if the spring is missing, broken, or damaged, causing the filter cover to not stay in place properly.
Removed old lint filter cover. Inserted spring on one end of lint cover and installed cover. Read more
Dryer hums but won't start or stops after 3 seconds? Replace the blower motor assembly. Moderate DIY repair with video guide. Fixes noisy operation.
Replaced dryer motor Read more