Gdf535pgr5ww Parts

Restore safe, organized loading on the top level. Replacing a damaged upper rack brings back smooth sliding, proper item placement, and dependable use without snagging or collapsed tines.

What it does

• Holds cups, glasses, and bowls securely on the upper level
• Helps prevent items from tipping or falling through the rack
• Restores smooth slide-in/slide-out when rails and rollers are intact
• Replaces racks with broken, rusty, or missing tines

What’s included
One upper rack assembly.

Install notes

• Open the door, pull the rack to the stops, then release/remove end caps to slide the rack out
• Seat the new rack on the rails and reinstall end caps—do not force
• Transfer any clip-on accessories from the old rack if applicable
• Run a quick rinse cycle to confirm smooth travel

The Lower Door Gasket is an OEM part for GE dishwashers. It is placed at the bottom of the dishwasher door to create a water-tight seal during operation, preventing leaks and ensuring that water remains within the unit during the wash cycle. 

Symptoms of a bad Lower Door Gasket include:

• Water leaking from the bottom of the dishwasher door
• Signs of mold or mildew near the gasket area
• Frequent puddles or drips underneath the door after a wash cycle
• The gasket becoming hard, cracked, or visibly damaged

Causes of a bad Lower Door Gasket can include regular wear and tear, exposure to harsh detergents and high temperatures, or improper installation that leads to uneven sealing.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Bring back smooth loading on the bottom level. This lower dishrack replaces bent or rusty racks so dishes sit securely and the rack glides cleanly without snagging or collapse.

What it does

• Holds plates, bowls, and cookware securely on the lower level
• Helps prevent items tipping or falling through broken tines
• Restores smooth slide-in/slide-out when rails and rollers are intact
• Replaces racks with rusted welds, missing sections, or warped frames

What’s included
One lower rack assembly.

Install notes

• Open the door, pull the rack to the stops, remove end caps, and slide the old rack out
• Seat the new rack on the rails and reinstall end caps—do not force
• Transfer any clip-on accessories or tine clips from the old rack if reusable
• Run a quick rinse to confirm smooth travel

The Lower Spray Arm Assembly is an OEM replacement part compatible with GE dishwashers. This assembly consists of the tubular spray arm and attached brackets that secure it underneath the upper dish rack. Part has been updated by the manufacture, heat sheilds  metal clips) are nologner included with the lower spray arm. They are not sold as a seperate part, they are no longer required per GE. 

Causes of a bad lower spray arm assembly can include mineral buildup that clogs spray holes over time or cracks/breaks from daily rack loading.

Symptoms of a bad lower spray arm assembly include:

• Inadequate cleaning of lower rack dishes
• Dirty dishes or glasses underneath with noticeable hard water spots
• Rattling or clicking noises from the loose spray arm during cycles

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.  

NOTE:  The Manufacture has updated the spray arm. The spary arm no longer has the metal ends on the tips  of the heat sheild is no longer required per the manufacture. 

The Tub Gasket is an OEM part for GE dishwashers. It is installed around the perimeter of the dishwasher door to create a water-tight seal during operation, effectively preventing water leaks. This gasket ensures that the dishwasher can maintain the necessary water level and pressure to clean dishes effectively, while also protecting your kitchen from water damage.

Causes of a bad Tub Gasket can include natural wear and tear from regular use, exposure to harsh cleaning chemicals that can degrade the rubber material, or improper installation leading to gaps or loosening.

Symptoms of a bad Tub Gasket include:

• Water leaking from around the dishwasher door
• Signs of mold or mildew on the gasket
• The gasket becoming hard or cracked
• Visible gaps between the gasket and the dishwasher door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Restore smooth, dependable rack movement. This kit replaces worn carriers and rollers so the lower dishrack glides in and out without binding, derailing, or dropping.

What it does

• Supports and guides the lower rack along the tracks
• Replaces broken, missing, or flat-spotted wheels and cracked carriers
• Helps prevent the rack from popping off the rails during loading
• Reduces drag that leads to stiff, uneven rack travel

What’s included
Four carrier brackets, four roller wheel brackets (covers), and eight wheels — a complete set of four assemblies.

Install notes

• Disconnect power before servicing the rack area.
• Pull the lower rack out; swap one assembly at a time to match left/right orientation.
• Fully seat tabs/locks on each carrier; verify wheels roll freely.
• Best practice: replace all four together for even tracking, then run a quick test cycle.

The Pressure Sensor Assembly is an OEM part for GE dishwashers. It monitors the water level within the dishwasher, ensuring the correct amount of water is used during each wash cycle for optimal cleaning performance.

Causes of a bad pressure sensor assembly can include wear and tear over time, clogs or debris obstructing the sensor, electrical issues, or damage to the sensor housing. Malfunctioning sensors can result from exposure to hard water minerals or detergent residues that affect the sensor's accuracy.

Symptoms of a bad pressure sensor assembly include:

• Dishwasher not filling with water properly
• Overfilling or underfilling with water
• Error codes related to water levels
• Dishes not being cleaned effectively

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lower Rack Roller is an OEM replacement part for GE dishwashers. This small but crucial component allows for smooth and effortless movement of the lower dish rack during loading and unloading.

Symptoms of needing to replace the lower rack roller include:

• Difficulty in sliding the lower rack in or out
• Excessive noise or grinding during rack movement
• The rack becoming stuck or not rolling smoothly
• Visible wear, cracks, or damage to the roller itself

Causes of a faulty lower rack roller can include normal wear and tear over time, exposure to heat or moisture, or physical damage due to impact or mishandling.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.

The Drain Pump is an OEM part for GE dishwashers. This part removes used water from the dishwasher at the end of each wash cycle. This part ensures that your dishwasher drains completely, preventing standing water that can lead to odors, mold, and mildew buildup inside the appliance.  

Causes for drain pump issues often involve clogging from large food particles or foreign objects, wear and tear on the pump's motor or impeller, or electrical failures that prevent the pump from activating.

Symptoms of a malfunctioning Drain Pump include:

• Water not fully draining from the dishwasher, leaving residue or standing water
• Loud or unusual noises coming from the pump area during or after the drain cycle
• The dishwasher failing to complete its cycle due to water not draining

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Middle Spray Arm Assembly is an OEM component for GE dishwashers. It is responsible for dispersing water across dishes located in the mid-section of the dishwasher rack. 

The spray arm plays an essential role in cleaning by spraying water directly onto dishes to wash away soap scum and food particles. It works with the lower spray arm and rinse arms to achieve maximum coverage and cleaning power throughout the wash cycle.

Causes of a bad middle spray arm can include buildup of minerals or debris that clogs the spray holes or damage to the arm itself such as bending or breakage. 

Symptoms of a bad middle spray arm assembly include: 

• Spotty or incomplete cleaning of dishes in the mid-rack section
• Clogging or slowed water dispersal from the spray arm 
• Leaks or drips from the spray arm connection point

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore model dishwashers. 

The Water Valve Assembly is an OEM replacement part for GE dishwashers. This valve assembly controls the flow of water into the dishwasher during each cycle stage. It regulates water temperature and volume to the desired wash and rinse settings.

Causes of a bad water valve can include mineral buildup interfering with valve function, worn internal seals, or obstruction in the valve inlet or outlet ports.

Symptoms of a bad water valve include:

• Incorrect or inadequate water levels during the cycle
• Inability to reach proper wash or rinse temperatures
• Water not shutting off fully between cycles
• Leaks from the water inlet area

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models

The Heating Element is an OEM replacement part for GE dishwashers. It is responsible for heating the water during wash cycles and assisting in drying dishes at the end of the cycle. The heating element ensures optimal cleaning and drying performance by raising the water temperature and promoting evaporation.

Over time, heating elements can fail due to wear, mineral buildup, or electrical issues. A malfunctioning element may result in poor cleaning or drying performance.

Symptoms of a bad heating element include:

• Dishes remaining wet after the drying cycle
• Water not heating adequately during the wash cycle
• Error codes related to temperature or heating issues
• Visible damage, such as cracks or corrosion on the element

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Latch is an OEM replacement part for GE dishwashers. This component not only secures the dishwasher door during operation but also contains the door switch that detects if the door is shut. This dual function ensures the door is both securely locked to prevent water leaks and communicates to the appliance that it's safe to begin operation.

Symptoms of a bad door latch include:

• The dishwasher door not closing or locking securely
• The appliance not starting, attributed to the door switch not detecting a closed door
• Water leaks resulting from an unsecured door
• Visible wear or damage to the latch or switch

Common causes for a malfunctioning door latch can be wear and tear from regular use, mechanical failures that impact the latch’s ability to hold the door closed, or issues with the door switch not accurately detecting the door’s position.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Floating Seal Assembly is an OEM part for GE dishwashers. This component ensures a watertight seal around the dishwasher door, preventing water from leaking out during the wash cycle. It is crucial for maintaining the efficiency and reliability of the dishwasher.

Causes of a bad floating seal assembly include general wear and tear, exposure to harsh detergents, or buildup of mineral deposits. These factors can cause the seal to lose its flexibility and effectiveness.

Symptoms of a bad floating seal assembly include:

• Water leaking from the bottom of the dishwasher door
• Poor cleaning performance due to reduced water pressure
• Visible cracks or deformities in the seal
• Increased noise during operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Rail End Cap is an OEM part for GE dishwashers. This part is designed to fit on the end of the dishwasher rack rails, preventing the racks from sliding off the rails when they are pulled out for loading or unloading dishes. The end cap plays a role in the smooth operation of the dishwasher rack system, ensuring the stability and security of the racks as they move in and out of the dishwasher.

Causes of damage to the rail end cap often include normal wear and tear, accidental breakage during rack movement, or deterioration over time due to exposure to high temperatures and moisture typical in dishwashers.  

Symptoms of a bad Rail End Cap include:

• Dishwasher racks slipping off the rails 
• Difficulty in pulling out or pushing in the racks smoothly 
• Visible damage or wear on the end cap 

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Latch Strike is an OEM part for GE dishwashers. It ensures the dishwasher door latches securely, allowing the appliance to operate only when the door is properly closed.

Causes of a bad door latch strike can include wear and tear from regular use, damage from slamming the door, or misalignment due to repeated opening and closing.

Symptoms of a bad door latch strike include:

• The dishwasher door not latching securely
• The dishwasher not starting or stopping mid-cycle
• Leaks around the door during operation
• Difficulty in closing the door properly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.