Jjw8230dds Jenn-Air Double Oven Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 8009
Original Whirlpool light bulb, 40 watt.
Symptoms of needing to replace the light bulb include:
- Dimming or flickering light
- Complete lack of illumination inside the appliance
- Visible signs of damage or burnout on the bulb itself
Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.
Do-It-Yourself Stories from Customers like You
Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016
I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it...
Read more
More
$17.76
- Compare At:
-
$20.96
- You Save:
-
$3.20
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001656
The Oven Temperature Sensor Kit is an OEM part for Whirlpool ovens. This sensor is essential for monitoring the oven's internal temperature, ensuring that it reaches and maintains the correct temperature for baking and cooking. The sensor is approximately 7 inches long.
Over time, the oven temperature sensor can fail due to repeated heating and cooling cycles, exposure to spills or grease, or electrical issues. When the sensor malfunctions, it can result in inaccurate temperature readings, affecting cooking performance and food quality.
Symptoms of a bad oven temperature sensor include:
- The oven not reaching the set temperature
- Food cooking unevenly or not fully
- The oven overheating or underheating
- Error codes related to temperature issues
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Oven is too hot
-
Little to no heat when baking
-
Won't start
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
Jenn Air stove JDS9860CDB00 error code 1d11 oven not shutting off. Joe D. • New Berlin , WI • March 20, 2019
First of all Appliance Parts Pros is the best!! I would not have had the confidence to make this repair myself without their outstanding videos and Q&A sections on their website. And their prices for parts are very competitive. Like many stories on the website, my oven would heat up beyond the temperature set point. When it reached the target temperature, the lower heating element (I think this is the “bake” element) would shutoff, but the top element (“broil” element I believe) would remain on...
Read more
More
$41.95
- Compare At:
-
$49.92
- You Save:
-
$7.97
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10245259
The Terminal Block is an OEM part for Whirlpool ranges. It serves as a crucial connection point for the range’s electrical wiring, ensuring a safe and reliable transfer of power to the appliance.
Over time, terminal blocks can deteriorate due to factors such as heat exposure, electrical surges, or wear and tear. When the terminal block becomes damaged or corroded, it can lead to poor electrical connections or potential safety hazards.
Symptoms of a bad terminal block include:
- Burnt or scorched connections
- Intermittent power loss to the range
- Difficulty in the range heating up properly
- Visible damage or corrosion on the terminal block
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Element will not heat
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Oven would only heat up to 347° f in bake mode Chris M. • Scottsdale , AZ • October 25, 2021
I determined the hidden bake element below the oven cavity was not working, because the bottom of the oven was cold during normal use. If you have a built-in microwave + oven combination (mine is KitchenAid Model No. KEMS308SSS05), this is a difficult repair. The engineer who designed this oven should be invited to succeed elsewhere. It is impossible to access the bake element from the inside of the oven, so the How To video associated with this part will not help you. I had to remove the...
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387230
The Whirlpool screw is an OEM replacement part responsible for securely fastening various components and parts within Whirlpool appliances. These screws are essential for maintaining the structural integrity and safe operation of the appliance. These screws hold together critical components like panels, brackets, handles, and internal parts.
This part fixes the following symptoms:
- Loose or wobbly handles on refrigerators, ovens, or other appliances
- Vibrations or rattling noises during appliance operation
- Inability to assemble or disassemble parts during appliance repair or maintenance
The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
The lint catch was broken Misti P. • Spokane , WA • January 18, 2019
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one.
Read more
More
$8.36
- Compare At:
-
$9.95
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74008014
The Oven Door Hinge is an OEM part for Whirlpool wall ovens and ranges. Located on both sides of the oven door frame, these metal hinges provide the pivoting connection that allows smooth opening and closing of the door during cooking cycles.
Causes of failure can include wear of the hinge joints from repeatedly bearing the weight of the heavy oven door over thousands of uses. Exposure to high heat during cooking may gradually deteriorate lubricating grease or materials.
Symptoms of faulty hinges include:
- Door rubbing or sticking during opening/closing
- Off-center alignment when shut or inability to fully latch
- Noisy squeaking or grinding emerging from hinges
- Hinges loosened from screws/fastenings or mechanisms seized
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016
I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it...
Read more
More
$109.34
- Compare At:
-
$130.11
- You Save:
-
$20.77
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10310258
The Bake Element is an OEM replacement part for Whirlpool ranges. It is an electric heating coil located at the bottom of the oven cavity that provides essential heat energy for baking and cooking functions. When engaged, the bake element distributes steady, even warmth from below food items.
Causes of a bad bake element may include deterioration and cracking of protective coatings after extended use. It can also incur damage from cleaning products or contact with other oven surfaces over time.
Symptoms of a bad bake element include:
- Slow, uneven heating of the oven cavity
- Foods not baking or cooking thoroughly
- The oven not reaching or maintaining proper temperatures
- Scorching on the bottom of baked goods
This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Wall oven (matag mew5530ddw) was not reaching temperature in bake mode above 300 deg Dennis G. • Hudson , FL • October 10, 2016
1st. replaced thermostat probe inside wall oven - no change. Then removed range heating element and measured it with ohm meter for continuity and found it to be OPEN. Ordered replacement range heating element; measured it before install and found it to be a few ohms - installed in less than 5 minutes and tested. ALL WORKS GREAT. Both items purchased with shipping were just over $100. (I chose to keep the thermostat probe instead of returning it being the oven is just over 10 years old).
Read more
More
$91.60
- Compare At:
-
$109.00
- You Save:
-
$17.40
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90767
The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.
This part fixes the following symptoms:
- Loose or wobbly components within the appliance
- Panels or parts that are not securely attached
- Rattling or unusual noises due to loose parts
- Damaged or missing screw
The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Certain buttons were'not working Brent T. • Easton , MD • November 17, 2014
One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS!
p.s. In doing my research come to find Maytag did little to insulate control panel from oven...
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10310260
This broil element is the oven's upper heating element. It delivers intense top heat for broiling and finishing, restoring proper broiler performance when the original element is open, warped, or visibly damaged.
- Provides upper radiant heat during broil and top-browning cycles
- Typical symptoms: broiler won't heat or glow; food won't brown on top; uneven broiling
- Replace if the element is cracked, blistered, pitted, or broken
- Restores consistent top heat and broiler function
Includes 1 broil element.
- Disconnect power at the breaker before servicing; allow the oven to cool
- Remove oven racks; take out mounting screws and gently pull the element forward
- Transfer the two wire leads one at a time; support wires so they don't slip back into the cavity; ensure snug connections
- Reinstall hardware, restore power, and test the broil cycle
This part fixes the following symptoms
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
Control display was not working James T. • Calhoun , GA • February 17, 2015
Ordered a new one.
Read more
More
$104.24
- Compare At:
-
$125.09
- You Save:
-
$20.85
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY706189
The Screw is an OEM part for Whirlpool appliances. This specific screw is used in various locations within Whirlpool appliances, securing components and ensuring the stability and proper alignment of parts. It is designed to fit precisely and maintain a firm hold, contributing to the overall functionality and safety of the appliance.
Over time, screws can become worn or stripped due to regular use, corrosion, or over-tightening.
Causes of a bad screw include wear and tear, exposure to moisture leading to rust, and over-tightening which can strip the threads.
Symptoms of a bad screw include:
- Loose or wobbly components
- Misalignment of parts
- Noise due to vibrating or loose parts
- Difficulty in securing or removing the screw
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Drum baffle broke off James H. • Etna , OH • March 21, 2017
I replaced all three baffles since the new one was a different design than then old one. i watched the video and the repair went well, except for hitting my hand with a hammer while removing the old baffles. went just like the video said it would
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74011278
The Oven Light Assembly is an OEM part for Whirlpool ranges. This part lights up the interior of the oven, allowing you to monitor the cooking process without opening the oven door.
Over time, the oven light assembly can fail due to normal wear and tear, exposure to extreme heat, or electrical issues.
Symptoms of a bad oven light assembly include:
- The light not turning on when the oven door is opened or when the light switch is activated
- Flickering or dim lighting inside the oven
- A broken or missing protective cover
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Light bulbs kept blowing went through about six bulbs inabout four weeks F. Leo V. • Hillsborough , NC • October 18, 2015
I ordered the replacement light module and install it. I was able to install the module without removing the walloven from the cabinet. Thank you for quick delivery of the module.
Read more
More
$80.21
- Compare At:
-
$94.65
- You Save:
-
$14.44
Genuine Whirlpool part
By: Whirlpool
Part Number: WP71001841
This high-temperature gasket seals the oven door to the cabinet. Replacing a worn seal helps your oven preheat more efficiently, hold steady temperatures, and reduces heat and vapor escaping around the door edge.
- Maintains a tight seal between the door and oven cavity to retain heat
- Supports accurate, consistent baking and roasting temperatures
- Helps reduce longer preheat or cook times caused by heat loss
- Replaces seals that are torn, brittle, flattened, or frayed
What's included: 1 oven door gasket. Installation notes:
- Disconnect power and allow the oven to cool completely before servicing
- Open the door and remove the old gasket, noting clip/screw locations and orientation
- Clean the mounting channel; press the new gasket in place without stretching it
- After installing, preheat and check for even contact all around the door
Do-It-Yourself Stories from Customers like You
The control panel was no longer working lights were not coming on no beeps could be heard hen you hit a key on the control panel it first started with the 3 6 and 9 keys and became worse Randy S. • Houston , TX • June 24, 2017
I replaced the old control panel with a new one. I also changed out the door seal to help prevent the control panel from going bad a second time. It was the heat from the oven getting to the keypad on the control panel that caused it to go bad.
Read more
More
$81.33
- Compare At:
-
$96.78
- You Save:
-
$15.45
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9781049
Color: clear. Measures about 3 inches in diameter.
Do-It-Yourself Stories from Customers like You
Intermitten mini explosions in the oven when trying to use Jerry L. • Canton , GA • December 28, 2015
Troubleshot the oven by checking the broiler which worked good (same fuel valve). After reading the some tips about troubleshooting the Glow Ignitor I could see the broiler ignitor got white hot and the oven ignitor only got bright orange (orange to red causes intermittent ignition or mini explosions). Watched the how to video and it was good information. You should be observant about which openings in the back of the oven as to where the two wires are coming out of. My oven is over 12 years...
Read more
More
$52.30
- Compare At:
-
$62.76
- You Save:
-
$10.46
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10282527
This straight oven rack restores a flat, sturdy surface for cookware inside your oven. Replace a bent, worn, or missing rack to keep pans level and allow smooth, safe loading and unloading at different positions.
- Provides level support for bakeware at multiple rack positions
- Slides on the oven's side rails for easier access to dishes
- Replaces racks that are bent, warped, corroded, or missing
- Helpful when cookware feels unstable or the rack is hard to move
What's included: 1 straight oven rack Installation notes:
- Allow the oven to cool completely; wear gloves to protect hands
- Pull the old rack straight out; align the new rack with the side rails and slide it fully to the back
- Ensure correct orientation and that the rack is fully seated in the side supports before use
- Refer to your model's user manual for recommended rack positions and any self-cleaning preparation
Do-It-Yourself Stories from Customers like You
Self cleaned with oven racks inside got all black Terri K. • Kailua Kona , HI • November 19, 2014
Ordered new racks
Read more
More
$83.34
- Compare At:
-
$98.34
- You Save:
-
$15.00
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98008545
Color: Black. For biscuit order 98008169. For white order WP98008544.
Do-It-Yourself Stories from Customers like You
Missing screws and bad sealing door gasket Thomas P. • Palmdale , CA • December 15, 2015
Ordered new screws and door gasket. Replaced the old door gasket now the oven warms up faster and bakes the stuff easier. Replaced the missing door trim screws. Now the door close without making noises.
Read more
More
$7.95
- Compare At:
-
$10.99
- You Save:
-
$3.04
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74008015
This oven door hinge receptacle mounts in the cabinet frame and receives the door hinge arm. Replacing a worn receptacle restores proper door support and closure for a consistent seal and safe, reliable oven operation.
- Secures the door hinge arm to the oven/range frame
- Maintains door alignment to help the gasket seal properly
- Supports smooth opening/closing and prevents the door from disengaging
- Common symptoms: door won't close fully, door sags or feels loose, hinge won't engage or the door detaches easily
What's included: 1 hinge receptacle bracket Install notes:
- Disconnect power (and gas, if applicable) and allow the appliance to cool completely
- Remove the oven door and support it to prevent damage
- Access the receptacle at the frame; remove mounting screws, install the new receptacle using existing hardware, and tighten securely
- Check door alignment and operation before returning the unit to service
Do-It-Yourself Stories from Customers like You
Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016
I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it...
Read more
More
$140.11
- Compare At:
-
$154.12
- You Save:
-
$14.01
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7103P027-60
This 10-32 terminal block nut fastens wire lugs to the appliance's terminal studs. Replacing a missing, stripped, or corroded nut restores a tight, reliable connection and helps prevent heat damage or intermittent power at the connection.
- Secures wire lugs to a 10-32 terminal stud for a solid electrical connection
- Restores proper clamping force when the original nut is stripped, corroded, or missing
- Helps address loose/burned terminal connections, heat discoloration, or intermittent power at the block
- Suitable for terminal block and similar 10-32 stud applications on compatible appliances
What's included: One 10-32 nut Install notes:
- Disconnect power at the breaker or unplug the appliance before servicing
- Inspect the terminal block, studs, and wiring for heat damage; replace any damaged components
- Clean threads and start the nut by hand to avoid cross-threading; tighten firmly without overtightening
- If the stud turns while tightening, hold it with an appropriate tool to protect the block
Do-It-Yourself Stories from Customers like You
Oven slow to heat and reported temperature did not equal an internal check. Douglas M. • Perry , FL • September 11, 2022
The oven temperature was low and the heating time excessive. However, the range display showed the requested 400F, even though the oven was really 250F. Because the oven displayed an inaccurate temperature, I ordered an oven sensor, a heating element, and a terminal block.
Replacing the heating element fixed the problem. The element I received was the same shape and size, but the supports were not the same. However, I think it must have been a design change after mine was manufactured...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07