Jvm1430ba001 Parts

• Doesn't shut off
• No heat
• Won't start

The first symptom was our microwave would continue to run after the time was up. The light would go out, the turn table would stop but you could still hear the microwave running and whatever was in it would continue to cook. The only way to stop it was to open the door. It was intermittent at first but eventually it would always run no matter what as long as the door was closed. Several other posts referenced these switches as the problem. I just replaced both and problem gone. It turns out... Read more

The first symptom was our microwave would continue to run after the time was up. The light would go out, the turn table would stop but you could still hear the microwave running and whatever was in it would continue to cook. The only way to stop it was to open the door. It was intermittent at first but eventually it would always run no matter what as long as the door was closed. Several other posts referenced these switches as the problem. I just replaced both and problem gone. It turns out... Read more

I read on line about other such ovens doing the same thing mine was doing, absolutely nothing! I even read stories of a major retailer telling customers to throw the microwave away. There's nothing you can do to fix it. After replacing a simple fuse that I ordered from you, the Advantium is as good as new. It took a grand total of 5 minutes to make the repair. The shipping cost more than the part, but it was all very worthwhile. Read more

Ordered two new bulbs and replaced them. The lights have two settings and only one bulb was working on the dimmest setting. The repair was easy. The new lights are so bright and arrived quickly. I will definitely order again. Read more

• Noisy
• Tray won't turn

I fix this problem by purchasing a new turntable motor. Simple 5 minute installation. Read more

I ordered the replacement lens from AppliancePartsPros.com. They shipped it quickly and when the part cam in I just swapped it out for the broken lens. Read more

• No heat

Wife let me know the microwave was making grinding noise while I was in garage fixing her car starter, never a dull moment. Further questioning she also said it wan't heating the food. Due to being an odd sized built in $$ unit I had to have repaired. I was getting quotes in the $4-500 range for just the magnetron. I was pretty confident the magnetron was the issue and also ordered a new capacitor and diode since I was going to be in there and a lot of money ahead repairing myself. About... Read more

I recently tackled a repair on my GE microwave (model JVM1440BD003, manufactured in 2003) to replace the light bulb sockets for the under-microwave lights. Since one socket was failing, I decided to replace both at the same time to avoid future issues. I used two WB08X10016 light sockets, which are the correct OEM parts for this model. The process started off smoothly thanks to a helpful installation video on the website. It made the job look straightforward: remove five screws to drop the... Read more

Ordered new switches (replaced all three- upper and lower door switches and switch monitor- just to make everything new). Received them within 48 hours! You tube video enabled replacement job to be completed by handyman neighbor in 20 minutes (would have been shorter repair time but for my kibitzing). Appliance Parts Pros gets an A+! Will do business with APP on any future appliance repairs! Read more

Wife let me know the microwave was making grinding noise while I was in garage fixing her car starter, never a dull moment. Further questioning she also said it wan't heating the food. Due to being an odd sized built in $$ unit I had to have repaired. I was getting quotes in the $4-500 range for just the magnetron. I was pretty confident the magnetron was the issue and also ordered a new capacitor and diode since I was going to be in there and a lot of money ahead repairing myself. About... Read more

Replaced the thermostat and it turned on and I have power again. Read more

We followed the manufacturer's instructions about re-positioning the fan motor and installing the vent damper (easy). We constructed a duct system from the microwave to the outside of the house (challenging). We used 3.25" x 10" metal duct to start the system through the wall behind the microwave, where we added framing to reinforce a cut stud. We ran the duct up a closet wall and through its ceiling into the attic. We had to make an offset duct piece from 3.25" x 10" metal duct to clear a... Read more

My particular model of microwave had one screw visible but the other hidden behind a plastic ring. I needed to pop the ring out by disengaging the plastics clips using a putty knife; then it was an easy job of unscrewing the old handle and screwing the new one in. It probably took me just as long to write this description as it did to actually replace the handle. Read more

I replaced both the Magnetron and the high voltage diode. I now have a fully functional microwave. I received the parts on time and the quality was good. I would use appliance parts pro's again. Read more

• Noisy

I opened up the microwave where the noise was coming from. I searched the web to confirm this part could be failing and found the part name and number on appliancepartspros.com. I ordered the part on Monday and it was in my mailbox 2 days later. Two screws and two wire connectors later and the old one was out. I installed the replacement part and everything worked great, no more grinding noise. Read more