Jenn-Air Jed8430bds18 Parts

The Burner Control Knob is an OEM part for Whirlpool ranges and cooktops. This knob allows for precise control over the heat output of the stove's burners, providing a critical interface for adjusting cooking temperatures. 

Symptoms of a failing Burner Control Knob include:

• The knob becoming loose or difficult to turn
• The indicator line or mark on the knob not aligning correctly with the control settings
• Cracks or damage to the knob that impair grip or function
• The knob not engaging the burner mechanism properly, resulting in no heat change when turned

Causes of a bad burner control knob often involve regular use which can wear down the materials, accidental impacts from kitchen activity, or exposure to heat and cleaning chemicals that degrade the plastic.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Size: 10-24X5/16-NI

This infinite switch controls the power level to an electric surface element, letting you adjust burner heat smoothly from low to high for consistent cooking performance.

• Regulates power cycling to the surface element to maintain set heat
• Replaces a failed control that leaves a burner stuck on high or won't heat
• Helps resolve issues like no heat, uneven or erratic heating, or a burner that won't shut off
• Restores precise temperature control to the affected cooktop burner

• Disconnect power to the range before servicing
• Note wire locations or take a photo before removing the old switch
• Transfer knob and mounting hardware from the original if required
• After installation, restore power and test burner operation through the full heat range

The fan control switch is the panel-mounted switch that sends power to the appliance's fan motor. Replacing a worn switch restores reliable on/off control and proper airflow so the fan starts and stops when it should.

• Provides user-operated on/off power to the fan/blower motor
• Helps regulate airflow for cooling, venting, or convection depending on model
• Typical symptoms: fan won't run, runs continuously, intermittent operation, or a loose/broken switch shaft
• Mounts behind the control panel and is actuated by the exterior knob/lever

• Disconnect power at the breaker before servicing
• Remove the control knob/actuator and panel trim to access the switch
• Note wire positions or take a photo; transfer wires one at a time to the new switch
• Secure with the original hardware, restore power, and test operation

This dual infinite switch controls power to a dual-size surface element on your range or cooktop, restoring smooth, accurate heat adjustment. Replace a failed switch to regain proper temperature control and dual-ring operation.

• Regulates cycling power to the inner and outer circuits of a dual surface element
• Provides variable heat levels from low to high
• Common symptoms of a failed switch: element won't heat, only heats on high, can't adjust temperature, element won't shut off, inner or outer ring won't activate
• Restores reliable response when selecting single-ring or dual-ring settings

• Disconnect power at the breaker before servicing
• Remove the control/console panel to access the switch
• Photograph/label wiring and transfer leads one at a time to matching terminal markings on the new switch
• Reassemble, reinstall the knob, and test both single-ring and dual-ring operations

This blower wheel mounts on the drive motor and pushes air through the dryer drum and out the exhaust. Replacing a worn wheel restores proper airflow for consistent drying and helps prevent overheating and nuisance shutdowns. What it does:

• Moves air across the heater, through the drum, and out the vent to remove moisture
• Helps maintain proper airflow and temperature inside the dryer
• Common failure symptoms: reduced or no airflow at the exterior vent, longer dry times, unusual scraping/thumping or vibration from the blower area, or overheating/shutoff
• Cracked fins or a stripped hub can cause the wheel to slip on the motor shaft

• 1 blower wheel

• Disconnect power and turn off gas supply before servicing
• Access the blower housing per your model's service instructions; remove the retaining hardware and replace the wheel in the same orientation
• Clean lint from the blower housing and vent path; inspect the motor shaft and blower seal for wear
• Reassemble and verify the wheel spins freely without rubbing; check airflow at the exterior vent

This 10-32 terminal block nut fastens wire lugs to the appliance's terminal studs. Replacing a missing, stripped, or corroded nut restores a tight, reliable connection and helps prevent heat damage or intermittent power at the connection.

• Secures wire lugs to a 10-32 terminal stud for a solid electrical connection
• Restores proper clamping force when the original nut is stripped, corroded, or missing
• Helps address loose/burned terminal connections, heat discoloration, or intermittent power at the block
• Suitable for terminal block and similar 10-32 stud applications on compatible appliances

• Disconnect power at the breaker or unplug the appliance before servicing
• Inspect the terminal block, studs, and wiring for heat damage; replace any damaged components
• Clean threads and start the nut by hand to avoid cross-threading; tighten firmly without overtightening
• If the stud turns while tightening, hold it with an appropriate tool to protect the block

Razor blade scraper.

Color: black. It measures about 1 inch in diameter.

This motor isolator is a vibration-damping grommet that cushions the motor mount to reduce noise and prevent metal-to-metal contact. Replacing worn isolators helps keep the motor seated correctly and the appliance running quieter and smoother.

• Cushions the motor to minimize vibration transfer to the chassis
• Helps reduce rattling or buzzing noises during fan/blower operation
• Supports proper motor alignment and mounting stability
• A common maintenance item when rubber mounts become cracked, hardened, or missing

• Disconnect power and allow hot components to cool before service
• Access the motor mounting points; replace isolators in matched locations
• Inspect adjacent mounts and hardware; replace additional isolators as needed
• Do not overtighten fasteners—compress the grommet evenly without deforming it

This replacement cooktop surface panel forms the appliance's upper cooking surface. It restores a smooth, level top, protects internal components from spills, and ensures correct alignment of the surface components for safe, reliable everyday use.

• Forms the cooking surface and covers the chassis beneath
• Provides openings/mounting points for surface components
• Common failure signs: cracks, chips, dents, rust, or finish damage that won't clean
• Warping or broken mounting points causing components not to sit flat or secure

• Disconnect power; for gas models also shut off the gas supply
• Wear cut-resistant gloves; handle carefully to avoid bending, chipping, or scratching
• Transfer surface components (e.g., burners/elements, bezels, gaskets, screws) from the old panel as directed by your model's service information
• After reassembly, restore power and, for gas units, check connections for leaks before use

The Filter is an OEM part for Whirlpool cooktops. This part is responsible for trapping grease and other airborne particles, ensuring that your kitchen remains clean and free from unwanted odors during cooking. It effectively captures grease and prevents it from accumulating in the exhaust system.

A bad grease filter can occur due to clogging, damage, or excessive wear. If you notice symptoms such as poor ventilation, persistent cooking odors, or visible grease buildup in the downdraft vent, it may be time to replace the worn-out or clogged grease filter with this genuine OEM part.

Symptoms of a bad grease filter include:

• Poor ventilation and airflow
• Lingering cooking odors
• Visible grease accumulation in the downdraft vent

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This dual-ring surface heating element replaces a faulty top burner to restore flexible cooking power and even heat across the cooking zone. It fits compatible Whirlpool-range cooktops and provides inner and outer heating rings for varied pan sizes. What it does:

• Replaces a damaged or non-heating top burner element so the cooktop can heat again.
• Restores both inner and outer heating zones when one or both rings have failed.
• Helps resolve symptoms such as no heat from the burner, weak heating, or uneven cooking.
• Matches the OEM element design for direct-fit replacement on supported ranges.

• One dual-ring surface heating element (single assembly)

• Disconnect power to the appliance before attempting any service to avoid electrical shock.
• Allow the cooktop to cool completely before touching the element.
• Basic removal typically involves lifting the cooktop or opening the cooktop rim.

This knob sleeve secures a control knob to the control shaft, restoring proper knob alignment and smooth operation so settings stay where you set them. What it does:

• Centers and stabilizes the control knob on the shaft
• Prevents knob wobble, slipping, or uneven rotation
• Helps maintain reliable control selection for temperature/settings
• Common symptom: loose, tilted, or spinning knob

• Disconnect power to the appliance before servicing for safety
• Remove the control knob to access the sleeve; installation typically slides into place on the control shaft
• Reinstall the knob and test function before restoring normal use

Replacement fan switch knob that provides a secure grip and clear indicator for adjusting fan settings on compatible Whirlpool appliances. The gray finish restores appearance and makes controls easier to use when the original is worn or damaged. What it does

• Replaces a cracked, missing, or worn fan switch knob so you can regain tactile control of the fan settings.
• Provides a visible pointer for accurate position selection.
• Restores original look and ergonomics to the control panel.
• Simple mechanical control part — no electrical components.

• Disconnect power to the appliance before attempting any service.
• Most knobs pull straight off the switch shaft; align the pointer and press the replacement knob onto the shaft until seated.
• If your model uses a retaining screw or clip, retain and reinstall it as required; use the proper tool and avoid overtightening.