Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Burner won't turn on or heat properly? This range burner control switch restores heat level adjustment. Moderate DIY with wiring terminal labels.
Replaced infinite switch on large burners and just went ahead and replaced the infinite switch on the small burners while I had it apart and installed all new surface elements as well...parts were shipped the next day and I received them within 2 days... Read more
Oven light not working or saw a flash near the bulb? This light socket houses the oven bulb and is a straightforward DIY fix in under 30 minutes.
Had to pull double oven and range top out from wall which involved removing the upper kitchen cabinet. Took the sheet metal off the back and had the socket swapped out in a couple of minutes. My old oven works like a charm! Read more
Range burner or oven light not working? This rocker switch controls heating elements and functions. Easy 15-minute DIY fix with step-by-step video.
I purchased 2 new light rocker switches, Because the heating element rocker switch was unavailable. First I removed the power source for safety. Then I simply pulled each switch out individually with a flathead screwdriver for leverage. I simply unplugged the wires from the old rocker switch, discarded the old rocker, plugged the wires into the new rocker switch, and pushed the new switch appropriately back into the control panel. I used the same steps for both rocker switches. Once... Read more
Burner overheating or stuck on high? This infinite switch regulates temperature by cycling power on and off. Common fix for unresponsive heat control.
I had one element that would operate wide open when turned on the low setting. It needed the switch replaced. Since I was replacing other elements I went ahead replaced them all, adding new drip pans and wiring kits to each new element. Once I replaced everything I was still having issues with the element that had the switch replaced. After further investigation my AC voltage readings were not correct at this element. I traced the problem back to the Molex connector feeding voltage to the... Read more
If your range burner won't turn on or off properly, or the indicator light stays on when turned off, this infinite switch restores control. DIY repair.
Remove front panel and replaced. Received parts fast. Read more
Replace a non-functioning oven light switch that won't illuminate the cavity. Simple DIY repair—typically takes 15-30 minutes with basic tools.
Removed & replaced igniter switch assembly. The hardest part was figuring out how to remove the range top...look up a YouTube video with your manufacturer and model number to see how to do it. Read more
Secures burner switch to mounting bracket for reliable control. Prevents switch misalignment causing stuck or unresponsive burners. Easy 10-minute fix.
I replaced the Switch for the burner. Works fine. Read more
Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.
Got new pieces, put it back together like it never happened. Read more
Broiler won't heat or heats unevenly? This upper oven broil element delivers intense top-down heat for broiling. Simple DIY repair takes under an hour.
Turned off the oven power at the breaker box. Removed the (2) 1/4" screws holding the front support bracket and removed the front support bracket. (This bracket is necessary as the broiler element is in the top of the oven) Then I removed the (2) 1/4" screws holding the element against the back of the oven, gently pulled the element away from the back of the oven to expose and unplug the (slip on) electrical connections, and removed the burned out element. Contrary to some home projects I... Read more
White plastic handle that mounts to the front of your range oven door. Replace if your handle is cracked, broken, or screw holes are stripped out.
Replacing the trim takes a little bit of alignment and light force. The trim slides over the glass panel of the door, with the glass sliding into plastic tabs. We kept the door nearly vertical (almost closed), lined up the tabs on the trim with the glass door, and used mild force to slide the trim down onto the glass door. (Also, we found that the tabs on trim we ordered were much bigger than the tabs on our broken trim. This is probably due to slight variations in Frigidaire's design over... Read more
If your large burner won't heat or heats unevenly, this 8-inch electric surface element restores consistent stovetop cooking. Direct plug-in replacement.
Originally, we had mistakenly provided the wrong model number for our Frigidaire cooktop so the wrong part was sent to us. It didn't fit properly so we investigated the problem with one of the customer service reps at Appliance Parts Pro and finally resolved the situation. The proper part was purchased, it was sent to us and we were happy to discover that it fit perfectly, as did the drip pans we ordered. Problem solved! Thanks to Garrett C. Read more
Screw that adjusts and secures the leveling leg to your range base or bracket. Replace if stripped, bent, or missing to restore stable footing and level your appliance.
I placed the burner cap on the burner and screwed in the leveling leg. Easy! Read more
Range indicator light illuminates to show when burners or oven are on. Replace if light is dim, flickering, or burned out. Verify fit with your model.
Fix a burner stuck on high or not heating with this surface element switch. Controls power to your cooktop heating element. DIY-friendly repair.
Oven won't bake or broil? This electronic control board manages oven functions and displays. Moderate DIY repair requires console removal.
I was able to order the replacement part from Appliance Parts Pros for less money. Oven works great. Read more
Replacement screw for securing panels, brackets, and covers on appliances. Replaces missing, stripped, or damaged screws to restore alignment.