Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Compressor clicks and won't start? Run capacitor helps start and run the compressor motor. Most DIYers replace in under 15 minutes with basic tools.
Noticed Rolls on the top shelf no longer frozen, though the meat around it still was. Note: This is a good test, keep something that thaws quickly and is not expensive on top shelf, to act as a barometer for your freezer health! I first found a trip online to advance the defrost timer, as a failed timer is a common issue. I advanced the timer, but nothing happened. I emptied the freezer, then removed the thermostat and tested it. No continuity! With the Freezer continuing to thaw, I... Read more
Lost your freezer key and can't access your frozen food? This replacement lock key restores freezer security in seconds. Simple plug-and-turn installation.
Ordered a new seal, and replaced it with a new one freezer works great now. Read more
Fix door ajar alarm or interior light staying on with this door switch. Common fix for false alarms when door is closed. Simple 5-10 minute repair.
REPLACED THE LIGHT/LAMP SWITCH. Read more
LED light bulb illuminates your refrigerator interior. Replace when bulb burns out, flickers, or stops working. Verify fit with your model number.
Replaced both The electrical board I found under the fridge was very easy to replace. The fan motor took a minute to bed puns and the biggest challenge was taking off/on the back panel to get to it. (By the way it was located in the freezer section. take drawers out to get to it. Read more
Secure door gaskets and interior trim on freezers and refrigerators. Replace broken or missing clips to maintain proper seal and temperature. Confirm fit.
Freezer won't cool or compressor won't start? The start device provides the electrical boost to start your compressor. Direct plug-in replacement.
The Compressor Start Relay is an OEM part for Frigidaire refrigerators. This essential component is responsible for initiating the compressor's start-up process by supplying power to the compressor motor. It helps kickstart the compressor, allowing it to begin the cooling cycle.
A faulty start relay or overload can occur due to wear and tear over time, electrical issues, or component failure.
Signs of a bad start relay may include:
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
First I have an LG French Door with a bottom freezer. It quit cooling. I went on line and watched some very informative You Tube videos. I trouble shot according to these videos. In these videos it shows that if there is a click coming off the compressor it has too meanings, the compressor is froze or the start relay is bad. I ohmed the compressor and had no open wires in the compressor. I then shook the relay and it was making noise. The videos stated that is there is a noise in the relay... Read more
Replacement storage basket for chest freezers. Keeps food organized and accessible. Order a new basket if yours is cracked, broken, or missing.
Found them on AppliancePartsPros.com. Their suggested part number was 100% accurate! Read more
The Control-Temperature is an OEM part for Frigidaire refrigerators. It is responsible for regulating the internal temperature by controlling the cooling system, ensuring the refrigerator maintains the set temperature for optimal food preservation.
Over time, the temperature control can malfunction due to electrical issues, wear and tear, or component failure. If the control fails, it can lead to inconsistent temperatures, affecting the freshness and safety of stored food.
Symptoms of a bad temperature control include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Ordered a new control- thermostat .Repair part had less wiring, but it was just enough. When the outer cover assembly was replaced two of the three clips broke off. It is being held in with duct tape. Freezer runs,and that's great. Read more
Freezer not cooling below 32°F or water leaking under freezer? The drier filter removes moisture from the refrigerant system. Soldering required.
Had a friend who is an appliance repair tech. Replace the evaporator, the heater coil, and the filter/drier. Parts were soldered together and the compressor was put under vacuum. Then, charged with 5 oz. of refrigerant. The freezer works great now! Read more
Refrigerator won't cool or compressor hums but won't start? A failed start relay prevents the compressor from turning on. DIY fix in under 30 minutes.
We replaced the starter and relay. Unit is working properly. We saved over $150 by replacing the parts in question. Read more
Freezer not cooling or staying cold? This temperature control thermostat cycles cooling on/off to maintain set temperature. Easy DIY fix restores cooling.
The freezer would cool down to 0 degrees after being plugged in but once it hit zero the freezer failed to keep it there, it would warm back to room temp. I ordered the cold control knob and it came very quickly! It did come with directions but failed to address what terminal you plug the black and yellow wires into. I checked online and ultimately called AppliancePartsPros and they forwarded me to a technician. He said it didn't matter so I plugged in the two wires and it has been a week and... Read more
White touch-up paint for refrigerators and appliances. Covers scratches, chips, and minor cosmetic damage on exterior surfaces. 0.6 fl oz bottle.
Quick touch up. The paint worked great. Packaged with a brush like nail poliish Read more
Fix a humming compressor that won't start by replacing this capacitor. Restores proper startup and cooling. DIY-friendly repair under 30 minutes.
This replacement gasket restores a tight seal between mating surfaces in your appliance, helping prevent unwanted air or moisture leaks so the unit can maintain proper performance and efficiency. What it does
Chest freezer door gasket creates an airtight seal to maintain temperature. Replace if cracked, torn, or freezer isn't cooling properly. Confirm fit.