Ffht1826lws Parts

Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old... Read more

Ordered parts from appliance part pros Read more

• Noisy

1. After hearing a loud noise on the freezer side of unit about halfway up, I started investigating what it could be? My conclusion was evaporator motor or evaporator fan blade. One of the signs of this issue was a distinct change in sound when I opened the freezer door. I ordered a new motor and blade, not knowing exactly what it was. 2. I couldn't get water to dispense, so I changed the filter and that wasn't the problem. I ordered a water valve and crossed my fingers. These parts arrived... Read more

I removed the meat drawer and shelving unit. I unscrewed the Philips head screws on either side of the shelf brackets. I cleaned the old surfaces and fitted the new plastic hangers in place. I screwed the new hangers in place with the screws I had from the old ones. It was very easy, except the holes in the plastic hanger are not quiet big enough for the screws. I had to push very hard with the screwdriver, and started to strip the head of the screw as well at the screwdriver itself. I did... Read more

This was a 2000 model so rather than just replace the defrost timer which was visibly burnt on the terminals, we just did everything. The cold control, defrost timer, thermostat, defrost heater and the compressor capacitor were all replaced. I had the same issue on my older unit and tore it apart replacing one item at a time over a three month period so on an older one i suggest do it all while it is apart. Read more

I removed to the cover to the coil, defrosted coil with a heat gun and checked the heater strip resistance. I set timer to defrost by hand to make sure everything was working. There was damage to the temp control sensor. Both parts were on your web site at a good price, ordering was easy. The parts were in the mail two days later. A screwdriver and nut driver were the only other tools other than a multi meter. Parts installed in five min. I had the option of talking with a pro !!! Read more

I paid to have a repairman diagnose the problem, HOWEVER, after submitting a quote for repair I knew that it was a ripoff to take advantage of us. He said the prices for the part and labor was given to him by his company. The part (evaporator fan motor) cost me under 40.00 from AppliancePartsPro, yet they wanted 90.00 for it. The labor charge they quoted was 190.00 to install the fan motor, yet after googling the day to install it, it took 10 minutes, had to remove 6 screws and unplug the... Read more

I ordered a replacement handle and screws. The process was very easy with the help of one of your "pros" who found all the parts needed and took my order. I didn't realize I was getting both a refrigerator door handle and a freezer door handle in one set, but now we have the freezer handle if we need it. Removing the old handle and installing the replacement was very easy. It looks great, in fact the replacement is metal, whereas the original was plastic, so it looks better than it ever did! Read more

I originally ordered the Fan motor from a appliance dealer. I waited for 5 days for it to arrive. In the meantime I scavenge a motor from a junk refrigerator from the dump. It worked while I waited for the motor from the appliance dealer. When I picked it up 5 days later it was the "wrong" part. I was fuming mad. I went online and found you guys and ordered the correct parts in 5 minutes. It arrived in 1 day and a half, "COOL" ! The repair went quick and smooth and now the refrigerator runs... Read more

The bar retainers just snapped in and the door handle can be replaced with three screws. Took about 5 minutes total. Read more

It was a pretty easy fix not as easy as the 1 nut models they show on YouTube it had 3 tiny ones that my big hands had a bit of trouble with. It said 15 minutes it took me about a half an hour. I called a service company just to see what they would charge. $90.00 to say hello 1 hour minimal labor $110.00 and $120.00 for the part. It cost me $90.00 and 30 minutes of my time. Thank you appliance pro. Read more

I chose to replace both parts so I wouldn't have to go back into the freezer. I used only a screw driver, pliers and the gas lighter to heat the wire connector sleeves. I watched the available do it yourself videos and was done in less than 30 minutes. It has worked perfectly since. No more Ice build up in the freezer. I had no trouble finding the exact parts I needed on your website. Read more

Replaced the defrost thermostat in freezer and fridge and the defrost heater in freezer. These guys had my parts in stock and I got them in 2 days Read more

• Door won't open or close

I put a piece of two-by-four, (2"x4") about 10-inches long on edge under the door to support the door. I removed the 3-bolts attaching the door hinge at the bottom corner. I then slid the washer onto the post and placed the bracket back in place with the 3-bolts. That did the trick. I used a 3/8-inch socket with extension and a ratchet. Read more

• Door won't open or close

My 10 year old frig door was hanging down to the point it wasnt fully closing and sealing unless you picked up on it. I ordered a lower hinge bracket, upper and lower bearing, and spacer. My bracket was bent down a little due to my kids hanging on the door when looking at the bottom shelf and i discovered my bracket was held on by only two bolts when there was supposed to be three. I ordered a bolt too. I was able to remove the bottom hinge, remove door to replace upper and lower bearing and... Read more

I ordered a replacement handle and screws. The process was very easy with the help of one of your "pros" who found all the parts needed and took my order. I didn't realize I was getting both a refrigerator door handle and a freezer door handle in one set, but now we have the freezer handle if we need it. Removing the old handle and installing the replacement was very easy. It looks great, in fact the replacement is metal, whereas the original was plastic, so it looks better than it ever did! Read more