Frigidaire Lafw8000lw0 Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Front Loading Washer Door Lock and Switch Assembly is an OEM part for Frigidaire washing machines. This component ensures that the washer door is securely locked during operation, preventing leaks and interruptions, and also communicates with the control board to allow the wash cycle to start.

Causes of a bad door lock and switch assembly can include wear and tear from regular use, damage from forced door opening, electrical failures within the locking mechanism, or issues with the switch contacts.

Symptoms of a bad door lock and switch assembly include:

• The washer door not locking or unlocking properly
• Error codes related to the door lock
• The washer not starting its cycle
• Interruptions in the wash cycle due to door lock failures

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Strike is an OEM part for Frigidaire washing machines. It is a critical component that interacts with the door latch, securing the washing machine door during operation. This ensures that the door remains closed and locked throughout the washing cycle, preventing water leaks and maintaining the safety and integrity of the appliance. 

Symptoms of a bad Door Strike include:

• The washing machine door not closing or locking properly,
• The washer not starting due to the door not registering as closed,
• Visible signs of damage or wear on the strike, such as cracking or deformation.

Causes of door strike failure typically involve physical damage from forceful closing of the washer door, general wear from repeated use, or material fatigue.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Water Dispenser Valve is an OEM part for Frigidaire washing machines. This valve controls the flow of water into the washing machine during the wash and rinse cycles. It ensures that the correct amount of water enters the drum, contributing to efficient and effective cleaning.

Causes of a bad water dispenser valve can include mineral deposits or debris clogging the valve, wear and tear over time, or electrical faults that affect the valve’s operation. 

Symptoms of a bad water dispenser valve include:

• No water entering the washer
• Insufficient water during cycles
• Leaks around the valve area
• Inconsistent water flow

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Outer Door Panel is an OEM part for Frigidaire washing machines. This panel acts as the exterior surface of the washer door, providing both a protective barrier and an aesthetically pleasing finish. It is designed to fit seamlessly with the washing machine, maintaining its sleek look and ensuring the door operates smoothly.

You should replace this outer door panel if it becomes damaged or worn out. Causes of a bad outer door panel can include impacts that cause dents or scratches, exposure to moisture leading to rust or corrosion, and regular wear and tear that affects its appearance and function.

Symptoms of a bad outer door panel include:

• Visible dents or scratches on the panel
• Rust or corrosion spots
• The panel not aligning correctly with the door frame
• Issues with the door closing or sealing properly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Outer Bellow Clamp is an OEM Replacement Part designed for Frigidaire front-load washing machines. Its role is to securely hold the door boot in place, ensuring a tight seal that prevents leaks during operation. This clamp is attached to the front panel of the washer, and its installation requires the machine to be unplugged for safety.

Causes of a faulty outer bellow clamp can include wear and tear over time, damage due to excessive force or tension, or corrosion from exposure to water and detergent.

Symptoms of a bad outer bellow clamp may include:

• Water leaking from the washer door or around the door boot seal
• Loose or misaligned door boot seal
• Visible damage or deformation of the clamp

This clamp is compatible with select Frigidaire brand models including Crosley, Electrolux, Kenmore, and White Westinghouse.

The Drain Pump is an OEM replacement part for Frigidaire front load washers. Located inside the base of the washing machine tub, it actively pumps out water through the drain hose after each cycle completion. Efficient drainage is vital for preventing standing water issues.

Causes of a bad drain pump can include mineral or scale buildup within the pump chamber or impeller over time. The water valve may fail to open fully, blocking drain flow. Bearings may wear, causing the impeller to jam.

Symptoms of a bad drain pump are:

• Incomplete water draining after the cycle
• An accumulation of water remaining in the tub
• Leaking from the base
• Error codes could indicate drainage problems.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore.

The Water Level Pressure Switch is an OEM replacement part for Frigidaire washing machines. It senses the water level in the washer tub and signals to the control board when the tub is full. 

Symptoms of a faulty pressure switch include:

• The washer not filling or draining properly  
• No flow detection resulting in improperly filled or drained loads
• Unexpected or premature terminating of cycles
• Potential leaks from overfilling due to failed level sensing  

Causes can be normal wear over time exerting pressure on internal components, moisture exposure damaging electrical circuits, or impacts disrupting accurate pressure monitoring.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

The Shock Absorber Mounting Pin is an OEM part for Frigidaire washing machines. It is a part that secures the shock absorber in place, ensuring proper absorption of vibrations and shocks during the washing cycle.

Causes of a bad shock absorber mounting pin can include loosening over time due to constant movement and vibrations, accidental damage or loss during repair or maintenance, or general wear and tear.

Symptoms of a bad or missing shock absorber mounting pin include:

• Excessive shaking or vibrating during the wash cycle
• Loud banging or rattling noises
• The washer moving or "walking" across the floor
• Premature wear or damage to the shock absorbers and other components

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Inner Bellow Spring Clamp is an OEM replacement part for Frigidaire front-loading washing machines. It anchors the interior bellow seal in the proper sealing position.

Causes of replacement include torsion fatigue from years of door opening/closing stresses. Mineral buildup may also restrict needed tension if left unchecked.

Symptoms consist of:

• Visible water leakage from the base of the washer door during active cycles
• Looseness permitting shifting or twisting of bellow position
• Inability to achieve proper water-tight integrity checks

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore ranges.

This washer tub-to-pump hose connects the outer tub to the drain pump, carrying wash water out during the drain cycle. Replacing a cracked, clogged, or leaking hose helps stop leaks, restore dependable draining, and prevent water damage.

• Directs water from the outer tub to the drain pump during drain and spin
• Common symptoms: water leaking under the washer, water left in the drum, slow or no drain, or drain-related error codes
• Wear, heat, or debris/foreign objects can cause splits, soft spots, or blockages
• Restores a sealed flow path to improve drainage and reduce leaks

• Unplug the washer and turn off water supply; use gloves and have towels or a shallow pan ready for residual water
• Access the pump area through the lower front or rear service panel (varies by model)
• Note routing/orientation; move clamps back, seat the new hose fully on both fittings, and resecure clamps
• Run a short rinse/drain cycle and inspect all connections for leaks

This rear shock absorber kit stabilizes the washer tub by damping movement and vibration. Replacing a worn shock restores smoother, quieter spins and helps prevent the drum from banging the cabinet or the machine from walking. What it does:

• Dampens tub movement to control vibration during wash and spin
• Helps prevent banging/thumping noises and cabinet contact
• Reduces "walking" or excessive shaking of the washer
• Can help minimize out-of-balance interruptions

• One rear shock absorber kit

• Disconnect power and turn off water before servicing
• Support the tub/drum to relieve load before removing the shock
• Remove retaining pins/bolts; install the new shock in the same orientation and transfer any reusable hardware
• For consistent damping, replacing shocks in pairs or as a complete set is commonly recommended

This washer drive belt links the motor to the drum pulley so the machine can tumble and spin. Replacing a broken or stretched belt restores smooth, reliable drum rotation during wash and spin cycles.

• Transfers motor power to the drum for tumbling and spin
• Worn or broken belts can cause no spin/tumble or intermittent rotation
• Common symptoms: drum won't spin, squealing or thumping noises, burning rubber smell, visible fraying/cracks
• Slipping belt can leave clothes wetter than normal at cycle end

• Disconnect power and turn off water supplies before servicing
• Access the belt from the rear or bottom; remove panels as directed in your model's service information
• Release belt tension at the motor/idler, remove the old belt, and route the new belt over the drum and motor pulleys with ribs properly seated
• Rotate the drum by hand to verify alignment; reassemble and test. Inspect the idler/tensioner and pulleys while open

This front shock absorber kit stabilizes the washer's tub during spin to reduce vibration and noise. Replacing worn dampers helps restore smooth operation and protects the cabinet and suspension from excessive movement.

• Dampens and controls tub movement during wash and spin
• Helps reduce shaking, "walking," and loud thumping/banging noises
• Can help when the washer won't reach or maintain full spin due to imbalance
• Replaces weakened or damaged front shock mounts/dampers

• Disconnect power and water before servicing
• Access shocks per your model's procedure; support the tub to relieve load
• Install with mounts aligned and fasteners tightened securely; verify free tub movement
• Many replace shocks in pairs to maintain balanced damping

The Inner Door Panel is an OEM replacement part for Frigidaire washing machines. This panel forms the inner structure of the washer door, providing a secure enclosure and supporting various components such as the door lock and handle. It plays a key role in ensuring the door seals properly to prevent water leakage during the wash cycle.

Causes of a bad inner door panel can include physical damage from impact or mishandling, warping or cracking due to age, or wear and tear from repeated use.

Symptoms of a bad Inner Door Panel include:

• Water leaking from the door during washing
• The door not closing or sealing properly
• Visible cracks or damage on the panel
• Difficulty in latching or locking the door

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This tub filter screens wash water as it leaves the outer tub, capturing lint and small items before they reach the drain pump. Replacing a damaged or missing filter helps restore proper draining and protect the pump from debris.

• Screens lint, threads, and small debris from water exiting the tub
• Helps prevent drain pump clogs and drain-related errors
• A clogged, damaged, or missing filter can cause slow/no drain, standing water, or pump noise
• Physical damage, broken tabs, or warping are common reasons to replace

• Disconnect power and turn off water; expect residual water—use towels or a pan
• Access location varies by model; the filter sits at the outer tub outlet along the drain path
• Release the hose clamp/retainer, remove debris and the old filter, seat the new filter fully in the port
• Reattach clamps securely and run a short drain/rinse to check for leaks and proper flow