Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Left side glide rail for refrigerator ice bucket. Mounts to freezer wall to support and guide ice bucket. Replace if cracked, broken, or missing.
It was quick and simple to replace. There were a couple screws holding it in place ant the repair was completed in less than 10 minutes. Appliance Parts Pros exceeded my expectations by delivering my part sooner than expected. Read more
Replaces a worn or broken door closure cam on your refrigerator's fresh food door. Installs at the bottom of the door to engage the latch mechanism.
Replaced upper and lower thimble's, lever arm, cam closure. Door stop was not the problem, but ordered it and replaced it too. The door of course has to come off, remove the top hinge, and lift it away. Lubricated moving parts with silicone spray. Be sure and put the door back in the open position, so the lever arm and cam closure can properly interact, then close the door. Remove the plastic grate at the bottom to get at the lever arm. Presto. Problem gone. Don't put excessive weight... Read more
Replacement door closure spring for refrigerator hinges. Installs on door hinge assembly to provide tension for proper closing. Needed when broken or worn.
I replaced the lever asm. and spring Read more
Pan cover wheel for refrigerator fresh food drawers. Replace this roller if worn, cracked, or broken to restore smooth drawer sliding and support.
Used the schematic provided to select the parts needing replacement and placed the order. Parts arrived and swapping new for old was simple. For the most part it was a matter of taking out the old and putting in the new. There were a few screws with wheels to replace but that was easy as well. Before purchase I searched several different sites and found all the parts needed. I compared prices of each item as well as shipping cost. Prices for each item were nearly identical between sites... Read more
Clear plastic door cover for the dairy compartment in your refrigerator door. Replace if cracked, broken, or missing. Snaps into place, no tools needed.
The door from ApplianceParts Pros snapped into place easily and corrected the problem. Read more
Replaces a broken or worn freezer door cam closure on side-by-side refrigerators. Installs on the door to control opening range and secure latching.
Watched an online repair video first. Then removed hex head screws on bottom of door. Replaced broken part. Read more
Fix inconsistent temps or ice buildup on evaporator coils? This sensor seal protects accuracy. DIY-friendly with wire splicing. Video guide available.
This fridge has had a problem of ice building up around evaporator coil in fresh food side. Wife (she HATES this thing) says it's done this from day one; 10 years. GE guy says all these models do this and there's no fix for it, so we have clean out the ice periodically... Like the 1940s pre auto defrost. Now with the issue of FF side temp too highi assumed the ice had built up around FF evaporator coil preventing proper cooling, but AppliancePartsPros.com suggested the FF temp thermistor may... Read more
Replacement humidity control slide for refrigerator crisper drawers. Installs in produce compartment to adjust moisture levels. Needed when original is broken, cracked, or missing.
Just replaced the part (snap it in...abc....123...no problem) Read more
Directs defrost water from the evaporator to the drain pan below your refrigerator. Replace if cracked, damaged, or clogged to prevent water pooling.
Pulled down the existing drain tube and installed new one. Tight area so it requires two hands to push up and attach the new tube. The short rubber tubing attached to the new drain tube has to fit snug onto the plastic tube connection that hangs down. Replacing the water dispenser tray is simple and no explanation needed, Read more
Plastic cover that sits over the crisper drawer in your refrigerator. Replace if cracked, broken, or missing to protect produce and maintain humidity.
I ordered a new cover middle pan and drawer. I had to transfer a seal and humidity control from the old middle pan to the new. A little gentle leverage applied with a paint can opener freed the needed parts from old cover. Snapped them in place on the new part, installed and all was good. Read more
Rubber grommet seals the ice maker fill tube where it enters the refrigerator cabinet. Replace if cracked, brittle, leaking, or missing to restore seal.
Replaced original (18 yrs.) 1/4" plastic tubing, clamp and grommet (AppliancePartsPros/GE parts) from outlet of ice maker water control valve to ice maker inlet. Also replaced water supply line to inlet of water control valve with new, GE braided, PEX 1/4" supply line with pre-attached female compression fittings on both ends. Repair job with AppliancePartsPros parts from outlet of water control valve went perfectly well, was simple, and had no leaks when tested. Parts were easy to install,... Read more
Replacement spring for refrigerator ice dispenser systems. Wraps around shifter lever to control crushed vs. whole ice selection. Replace if broken or stretched.
When I took it apart I found that the drive cup was cracked, the helix lock plate hole was reamed out and the ice deflector spring was broken. The biggest problem was the helix had slipped down the shaft and allowed the end of the shaft to bore a hole in the housing which made it a bear to get out. Others have had the same problem. Once I got past that obstacle, it was simple to replace all the parts and it's working like normal again. Very helpful video explaining the repair. Read more
Protective cap that covers the evaporator fan motor bearing and housing in freezers and refrigerators. Replace if cracked, broken, or missing to prevent debris.
Replacement of the evaporator fan motor, fan blade, and grommets. The amount of disassembly to reach the part took most of the effort Read more
Black plastic lever assembly that installs on the freezer door hinge mechanism. Replace when cracked, broken, or missing to restore proper door closure.
Secures drawer rollers in your refrigerator's slide assembly. Replace if lost during maintenance, stripped, or missing to properly mount drawer wheels.
Ice dispenser not working or jamming? The ice bucket helix moves ice cubes to the crusher. Moderately difficult repair requiring full disassembly.
Ice was not being dispensed when lever was pushed in either crushed or cubed mode I removed the ice bin. After searching the web for reasons for this I pulled the bin out and started looking at auger assembly. I noticed that the sections of the Helix blades were missing. Ordered the Helix here at AAP and received the part the next day. The whole process took about an hour and as others have noted, you have to disassemble the bin assembly to get the auger assembly out. I watched the video... Read more