Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Illuminates your refrigerator interior. Replace when burned out or flickering. Appliance-rated for durability. Verify wattage and base type match.
I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks Read more
Freezer fan loud or not spinning? This evaporator fan blade circulates cold air over the coils. DIY-friendly repair with our video guide.
I had found that the fan in the freezer was making a lot of noise. Turns out the shaft was loose, causing the flan blade to wobble. Replaced the motor and fan and now it runs like a new unit. Read more
Replacement cold water reservoir tank for refrigerators. Installs behind the crisper drawer. Replace if cracked, leaking, or causing contamination issues.
I replaced the supply line to the fridge - no change in taste. I replaced the MWF manifold and tubes, the water inlet valve and the water storage line. That did it, good tasting water again! The ice still has a bad taste, so I'll replace the supply tube from the valve to the ice maker. Overall, replacing these parts was easy and the videos from Appliance Parts Pros helped. Read more
Seals your refrigerator's fresh food door to keep cool air in. Replace if door won't seal, fridge won't cool, or gasket is torn. Confirm fit by model.
We replaced both the fresh food door and freezer door gaskets. Old gaskets must have lost their magnetic abilities. Read more
Replacement rear wheel for refrigerators. Mounts to the bottom rear frame to enable smooth rolling for cleaning and repositioning. Order if cracked or missing.
The front wheel assembly replacement (WRXO2X12454) was straightforward and easy to do. Took maybe 30 minutes start to finish. The rear wheel assembly (wheel WRO2X10695 and axle WRO1X10604) that was more involved as the original wheel axle is actually a rivet that you have to cut out. 1. I used a vibrating multitool with a carbide blade to cut the axle out. Had to use a pair of vise grips to hold the rivet to keep it from spinning while cutting it. 2. The new axle I drilled a 2mm hole thru the... Read more
Refrigerator won't cool or compressor won't start? This compressor start relay and overload powers the compressor during cooling cycles. DIY repair.
We isolated a burning smell in our kitchen to our refrigerator, GE Profile PSS23MGTCCC which we purchased in November of 2006. This occurred at 3AM on 29 January 2015 and I am thankful that my wife got me up to investigate this odor. I unplugged the refrigerator. I plugged the refrigerator back in at 6AM thinking it had time to cool. The burning smell happened immediately and I unplugged the refrigerator again right away. My son in-law looked up some possible issues that could have... Read more
Ice won't dispense or auger spins freely? The drive coupler connects the motor to the auger. Moderately easy DIY repair with pliers and patience.
This was a two and half year issue as different things failed at different times. I would get one part, then another would fail. Ultimately, I got to a point where what failed, I hadn't been ordered the part yet. The seal on the freezer door took three bathing's before it plumped up and un-creased. The directions on the box it is shipped in said to heat the seal up in hot water then cool it down with tap water. I didn't need to do that. It took a lot of massaging of the seal, but... Read more
Refrigerator won't cool and compressor won't run? A faulty start relay prevents the compressor from starting. Moderate DIY repair, 30-45 minutes.
Check compressor with my Hotwire kit I made when I worked for GE. When removing the compressor relay it broke in pieces. Ordered and replaced new relay, overload & run capacitor. Still did not work. Check if there’s power to compressor and found no voltage. Took control board out and found a component burnt. Ordered and replaced control board. Everything is back to normal. Love your service. Parts was supposed to come in 3-5 days but came next day instead. I am very very impressed and grateful.... Read more
Channels water from the fill tube into the icemaker mold. Replace if cracked, broken, or dislodged, causing water leakage or ice buildup in freezer.
Replaced the stripper and fill cup - turns out that the fill cup came with the locking tab broken off. The stripper had a missing paddle, and ice cubes would jam and shut down the ice maker periodically. Let the ice maker warm up after you remove it so the plastic is not so brittle. You have to pry the old stripper out. Make sure the new one locks all across the front. My refrigerator has the ice maker mount toe the side instead of from the hangers in back. I wasn't sure how to remove it,... Read more
Damaged or cracked dispenser trim? This trim snaps around your refrigerator's water and ice dispenser opening for a finished look. DIY repair in 20 minutes.
After viewing your video the job went as planned and took maybe 20 minutes. Read more
Supports the upper fresh food door on side-by-side refrigerators. Replace if the original cam riser is worn, cracked, or broken to restore smooth door operation.
Replaced the two parts ordered. Read more
Lower cam riser for refrigerator door hinge. Lifts door for smooth opening and closing. Replace if cracked, worn, or missing to restore proper fit.
We bought a used fridge and forgot to get the hardware to mount the doors. Looked up the model on your website. Using the pictures I was able to order just the parts I needed and not to duplicate anything (or leave anything out!). The parts arrived and because I watched the "how to" video I knew to use the "trick" to hold the doors up while attaching the hardware. Had the doors mounted in less than 15 minutes!.. Thanks Read more
Fix a refrigerator not cooling with this evaporator fan motor. Circulates cold air throughout fridge and freezer for uniform cooling and temperature control.
New cond fan & new evap fan & new defrost heater unit Read more
Water line fitting that connects the ice maker supply tube. Replace if cracked, leaking, or damaged to restore a secure seal and prevent water leaks.
With new hose Read more
Replacement chiller shelf for your refrigerator door. Stores snacks, beverages, and condiments at cooler temps. Replace if cracked, broken, or missing.
My refrigerator is 13 years old and has always been a pain. The shelf above the ice maker broke last year which caused the ice maker to keep making ice even when the bin was full (the shelf keeps the ice contained which causes the ice buildup to shut off the ice maker). My water dispenser would occasionally refuse to dispense water. It appeared to me that the issue was caused by the nozzle freezing. The trap door for the ice was not closing properly so freezing air was always blowing out. ... Read more
Refrigerator light not working? This light bulb socket holds the bulb securely and provides electrical connection. Easy DIY repair with video guide.
Had some confusion of what part I needed, needed the one with the motor and thermostat. Fortunately, I've been fixing wiring for many years, I simply cut the new motor out of the harness, and used that nice glue-inside-heat-shrink tubing to seal the soldered 'Western Union' style splices. New light socket and lamps fit fine, worked fine, new motor is fine, problem resolved. FYI: Look closely at the wiring in you unit, there are two wire harnesses, one feeds the light, the other feeds the motor... Read more