Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Burner not heating? This 5.5" radiant element fits beneath glass cooktops. Common fix for non-working burners. Moderate DIY, 20-30 minutes to replace.
Raised ceramic top, removed old element, installed the new one. Read more
Fixes burner stuck on, no low heat, or burner not heating. Controls temperature levels on electric range surface burners. Moderate DIY repair.
Switches needed to be replaced. Make note of where each screw comes from. They were not all the same. To remove the front panel and get to the switches, you have to partially remove the cook top. Removed 5 screws from the back to release the cooktop. Slid the cooktop back far enough to expose screws holding on the front panel. Removed 4 screws from the top and 6-8 from the bottom (opened the oven door to get to the bottom screws). Removed screws from the front panel holding the switch in... Read more
Clear glass lens that protects your oven light bulb. Replace if cracked, broken, or cloudy to safely view cooking progress. Confirm fit with model number.
Tested the power to the unit by turning on the cooktop portion and saw that I had power to all of the burners. Turned the selector knob to broil and saw that the top element would heat up. I then turned off the breaker to the unit. I then decided to take out the baking element to do a continuity test. When I touched it, a 1.5 inch section fell out. Since that concluded my continuity test, I assumed I needed a baking element. After receiving the parts the NEXT DAY (amazingly great service... Read more
Cosmetic trim channel that covers the bottom perimeter of your range door. Replace if rusted, cracked, damaged, or missing to restore door appearance.
With the help of Ms.Kelly Hunt, AppliancePartsPros.com, I was able to locate the correct parts. It took approx. 30 minutes to remove the door and replace the shattered glass and bottom door trim. I wouldn`t hesitate to use this service for future use.The staff is friendly, helpful , knowledgeable and delivery is very fast. Thank you Martin Dobbins Read more
Range won't heat or burners stopped working? A burnt or melted terminal block may be the cause. This wiring connection hub routes power to elements. DIY repair in 10-20 minutes.
Removed damage terminal block ordered new block on line. when I received new block installed it stove works fine easy to replace. If I had not been home at the time when this happen it may had cause a big house fire. Read more
Rear drawer support bracket mounts at the base of your range to provide weight-bearing support for the lower oven drawer. Replace if cracked or missing.
So, in the process of a kitchen remodel my GC managed to lose *both* of the rear plastic supports for my GE stove! The drawer was totally unsupported without the brackets. I managed to find them on your site and see that they were a new and better design (rear mount with screw vs side mount and no firm mounting). The install was a snap and the brackets work excellent. I wish I knew that there was a new design years ago or I would have bought them much sooner! Thanks!! Read more
Oven door won't close or lock properly? This range door latch and handle assembly secures the door during baking and self-clean cycles. DIY repair.
Replaced the part. Read more
Inner oven door glass installs inside the door cavity behind the outer panel. Replace if shattered, cracked, or broken to restore viewing window function.
I ordered the part from APP, removed the door, removed the inside panel and replaced the glass. Hardest part was figuring out exactly which screws to remove to open the door. Read more
Burner won't turn off or stays on high? This range surface element switch controls heat output. Easy DIY repair—most install in 5-10 minutes.
First I took the back top panel off the stove. The crackling was coming from the control element. I went directly to AppliancePartsPros.com diagram to see what part I needed. Ordered and the part was delivered within 72 hours. The installation was so easy. Pull a couple wire off and reinstall them on the new control. No more crackling. A repair that would have cost me at least $100.00 or more, done by me for +/- $25.00. I love this site, I love the information you offer for... Read more
Burner won't heat or heats unevenly? This 6 inch radiant element restores consistent cooking performance. Typical DIY repair takes 30-45 minutes.
This repair was on a GE glass Cooktop range. This range has two indicator lights, a Burner On light, and a Hot Cooktop Light. The problem I was having was, the Hot Cooktop stayed on all the time (24x7), even when the cooktop surface had been off for hours and was cold. YouTubes that I viewed were all misleading on this symptom. They all pointed to the switch, which is the fix for the Burner Light staying on, not the Hot Cooktop Light staying on. I figured it out by going to the schematic.... Read more
Burner stays on high or won't turn off completely? This infinite control switch regulates surface burner heat. Simple 10-minute DIY fix with video guide.
I first checked a repair video and found the procedure was a 10 minute job. I then went to the website, put in my stove model number and searched for the switch. While I was looking I was offered a chat session with one of their experts. I am glad that I accepted. The switch I was looking at was not the right switch for the job. My expert verified my model number and the switch that need to be replaced. After a couple of minutes, she came back with the right part and placed the order for... Read more
Replace your range's light receptacle socket when the oven light flickers or won't turn on. Easy DIY fix restores proper bulb connection. Confirm fit by model.
Called Appliance Parts - service agent was extremely helpful. Tried to find an assembled piece was unable to do so. Send me the individual parts which were very easy to assemble. Was able to replace entire light assembly, reconnect wire with new terminal end. Light works find just now. Would definitely call again if I needed assistance. Read more
Covers the control panel lamp opening to diffuse light and protect from debris. Replace if broken, cracked, or missing to restore clear indicator visibility.
Took top apart to find out that the problem was just the lens for the light was broken. Come to find out that the lens is what holds the light in place. When the lens broke the light fell down into the base of the cooktop. I bought a light and lens but for the price I could not go wrong. I cannot believe how fast and easy my order was handled!! Awesome company Read more
Replacement touch pad overlay for range control panels. Installs over the control board to restore button functionality. Needed when worn, cracked, or unresponsive.
My wife put the faceplate on the oven control while I accessed the display by pulling the oven out, unplugged it, and removed the rear cover. Only three nut head screws held the upper back panel. 4 nut screws hold the display onto the oven, they were easily removed. My wife took a couple photos of the rear wiring to ensure we plugged the new oven control in properly (there are a fair number of wires but they are color coded in most cases). Turns out we didn't need the photo. As we pulled a... Read more
Indicator light illuminates when cooktop surface is hot. Replace if light stays on constantly, fails to light, or housing is cracked. Verify fit by model.
Easy fix. Pulled out the range and disconnected power cord. Unscrewed two screws in front of unit. Tilted smoothtop open toward rear of stove. Propped a piece of wood to keep it open. Removed burned out Indicator bulb and its plastic housing. Disconnected two wires attached. Installed new bulb and its housing attaching the two wires...housing clicked into hole where old one was removed. Closed top and re-attached two screws... Now works fine. Read more
Oven slow to heat or not heating at all? This hidden bake element delivers consistent bottom heat for proper baking. Moderate DIY, about 1 hour.
I called GE and they sent a tech out. $89 service call. Had I REALLY inspected the oven the hidden element had blown and separated and part of it welded itself to the inside of it's compartment. GE wanted another $350 to come back and fix it. I bought the part here for around $55 and had it running again in about an hour! Read more