Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Microwave Door Latch is an OEM replacement part for GE microwaves. It securely fastens the microwave door when a cooking cycle is activated. A well-functioning latch is important for safety purposes, preventing accidental door openings and potential radiation exposure during operation.
Causes of damage usually involve wear from normal usage over time as the latch mechanism is utilized frequently. Failure can impair safety.
Symptoms of a defective door latch include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
FOUND THAT THIS IS A DIRECT REPLACMENT FOR THE DOOR LATCH ON MY ADVENTIUM PSA1201RSS 01 MICROWAVE/CONVECTION OVEN. GE SAID THE PART WAS NOT AVAILABLE BUT THIS PROVED THEM WRONG. A $3 PART SAVED A $300 DOLLER DOOR. Read more
Microwave tripping breaker or won't start? Failed door interlock switch is the likely cause. DIY repair in 30-60 minutes with basic tools.
By replacing the switches. Read more
Replace your cracked, broken, or missing microwave glass cooking tray. This rotating turntable supports food for even heating in your microwave cavity.
Ordered new tray from Appliance Pros Read more
Microwave tripping the breaker or won't power on? This thermostat protects against overheating. Common fix when the unit is dead. Moderate DIY repair.
Tried to turn the microwave on, checked the outlet for power, check the breaker to see if it was tripped, all was in order. Removed the over the range microwave and pull the covers, Tested continuity with a multimeter for each of the 4 normally closed thermostats, found 2 bad (open). The upper 110 and the lower right 70. Ordered the needed parts as well as both lamp sockets and bulbs as they where broken too. The parts where correct and where delivered on time. (Also, in your tools needed or... Read more
Replacement vent grille that covers the exhaust opening at the top of your microwave. Needed when the original is cracked, broken from impact, or missing.
Ordered a replacement from you. Read more
Removes grease, smoke, and odors from your microwave's ventilation system. Replace when clogged or discolored. Confirm fit with your model number.
Slid in new ones Read more
Microwave convection oven not heating or temperature incorrect? This thermostat regulates oven temperature. Common fix for heating issues. Moderate DIY.
Went to Appliance Pros and found the part for my microwave. Web site was very easy to use. Ordered the thermal fuse and it was delivered in 2 days. Shipping was a a bit expensive, but can't complain with two day delivery. Replaced the failed part and the microwave now works great. It 1 1/2 hours, but I took my time. Needed one helper to remove the top screws. Handy-wife did it without a problem. Read more
Microwave tripping breaker when door opens or at startup? A failed monitor switch with welded contacts is the likely cause. 30-minute DIY repair.
Replace your microwave's light bulb to restore interior visibility and monitor cooking without opening the door. Fits specific GE models—verify compatibility.
Your website didn't show the sockets for my model,but I ordered some for a different model and they worked perfectly.I also ordered the correct 30watt bulbs. Read more
Fix a microwave that won't heat or hums but doesn't start. This capacitor stores energy for the high-voltage circuit. Moderate DIY repair, 30-60 minutes.
Wife let me know the microwave was making grinding noise while I was in garage fixing her car starter, never a dull moment. Further questioning she also said it wan't heating the food. Due to being an odd sized built in $$ unit I had to have repaired. I was getting quotes in the $4-500 range for just the magnetron. I was pretty confident the magnetron was the issue and also ordered a new capacitor and diode since I was going to be in there and a lot of money ahead repairing myself. About... Read more
Fix a microwave with no power or intermittent shutoffs. This thermostat monitors temperature and protects internal components. DIY repair in 20 minutes.
Replaced the thermostat and it turned on and I have power again. Read more
Clear glass rotating tray for microwave cooking cavity. Replace if cracked, shattered, broken, or missing. Measures approximately 14 inches diameter.
Placed the new tray in microwave and…voila… it was fixed. Read more
Microwave won't heat or stops working? This thermal cutoff thermostat prevents overheating damage. DIY-friendly repair, typically takes 10-15 minutes.
The wonderful parts pros on the phone said that it was probably the diode or the magnetron. So we tried the cheapest way first and it worked so happy to have my microwave back and working for only a few dollars rather buying a new appliance. Read more
Controls exhaust airflow in over-the-range microwaves. Replaces bent, damaged, or missing damper assemblies for proper external venting installation.
We followed the manufacturer's instructions about re-positioning the fan motor and installing the vent damper (easy). We constructed a duct system from the microwave to the outside of the house (challenging). We used 3.25" x 10" metal duct to start the system through the wall behind the microwave, where we added framing to reinforce a cut stud. We ran the duct up a closet wall and through its ceiling into the attic. We had to make an offset duct piece from 3.25" x 10" metal duct to clear a... Read more
Replace your microwave's turntable support ring if cracked, broken, or worn. This rotating ring assembly sits beneath the glass tray on small rollers.
Replacement part works fine. Read more
Controls airflow in your microwave's venting system. Installs in the duct assembly to regulate steam and moisture release. Replace if cracked or missing.
This damper was added to the outside vent duct line as an additional block against outside air intrusion. Under spousal orders I had just changed the microwave vent to the outside (the proper way to go, but much more difficult to accomplish) but then there was some "flowback" when the wind was pressing against the back of the house (westward facing), and I was ordered to reduce this flow before the winter arrived in full force. There is this same damper on the microwave unit itself, but I... Read more