Need Help?
Call or text
Replace your stand mixer's power cord if it's damaged, frayed, melted, or chewed. This electrical cord connects your mixer to the outlet for power.
I replaced the Board-Phas and speed control plate since power was not making it to the motor. When I received the speed control plate it had nuts on the upper screws with springs, since my old one didn't have nuts I assumed that the nuts were to keep the springs on until installed. After putting it back together, I noticed that though it worked, the first two settings did nothing. Now, guys, I was desperate, OK. I downloaded the service manual and read it from front to back, and when I got to... Read more
Spacer washer maintains proper spacing between mixer gearcase components. Replace if cracked, worn, or missing to restore correct alignment and operation.
You Tube is my friend…..I looked up common issues with the KitchenAid mixers, and saw how to take it apart with “ease” - discovered the broken plastic worm gear; Appliance Parts Pros had a great part breakdown and I was able to locate and order the replacement gear (I bought some washers as well but was able to re-use the existing ones) within about 10 minutes. Received the parts in about 3 days and put it all back together successfully - a refurbished wedding present for a friends’s kid that... Read more
Replacement power cord for stand mixers. Connects your mixer to the wall outlet. Replace if frayed, heat-damaged, cracked, or loose for safe operation.
Took it apart after watching a YouTube video and fixed it with no issues. Works as good as new now Read more
Fix grinding noises and stripped gears in your stand mixer. This pinion drive gear transfers motor power through the gear train for smooth mixing.
REPLACED WORM GEAR AND OTHER GEARS SHOWING WEAR Read more
Fix a mixer stuck at one speed or running sluggish with this phase control board. Regulates motor power across all speed settings. Video guide included.
Drip ring that mounts around the planetary assembly at the base of the mixer head. Covers the gap below the gearcase to restore a clean, finished look.
This was a problem that I'd had previously with this mixer. The worm gear, which is designed to fail (so that more serious damage does not occur to the motor), did fail while I was mixing some multi-grain bread dough. After the previous failure (pre-youtube days), I took the machine in for repair. The repair-shop cost came to about $150 in labor. Parts were extra. This time, I decided to do the repair myself, since I figured that I knew what was wrong. I found the appliancepartspros... Read more
Fix a stripped or worn center shaft causing poor mixing or grease leaks. This vertical shaft supports the planetary gears in your stand mixer. DIY repair.
Replaced the center gear and since they sent the hub along I replaced that too just to be safe. Used the live chat before ordering to make sure I was ordering the correct part. The person I chatted with was very nice and very helpful and parts came in good shape, and just as ordered. Replaced the stripped gear the next day and added a bunch of grease and the mixer works like new. Was very impressed with their diagrams and helpful videos as well as their large selection of parts. The other... Read more
Machine screw with 10-24 thread fastens motor housing, gearcase, and internal brackets in stand mixers. Replace stripped or missing screws to restore secure assembly and reduce vibration.
Watched a you tube video that covered every detail. Identified the problem, showed how to take mixer apart, confirmed the problem, what parts to order and how to reassemble the mixer eliminating potential issues. Overall this DIY was an A plus. Read more
Fix a mixer that won't start or runs intermittently with this brush holder cap. Secures the carbon brush and spring in the motor assembly.
Your training film was a lot of help for me. Thanks!!! Read more
White planetary gear assembly for stand mixers. Installs in the mixer head to drive beaters and attachments. Replace if cracked, damaged, or worn.
Removed the old planetary and cleaned metal shavings from gears. Transferred the old axle/gear assembly onto the new planetary. Inserted the new (and expensive) screw for the main gear and torqued it very tight (as well as the original other four screws). Slid the new planetary gears together and re-inserted the holding pin. Tapped on the cover ring and was done. Read more
Grey thumb screw secures attachments on stand mixers. Replacement needed when original screw cracks, breaks, or threads strip. Installs easily by hand.
Replaced it with ordered part. Read more
Mixer won't run or just hums? Worn motor brushes in the holder cause power loss. This DIY repair restores full motor function on stand mixers.
Checked out You tube video. Easy tune up. One gasket was damaged and I did not notice that the brush holders has no brushes. I believe a quick call to Appliance parts pros will fix this, besides I need a few more parts. I expect to get another 20+ years from this KitchenAide mixer, once repairs are competed. Watch out for the single lock washer located on the rear upper housing screw, you don't want to lose this! Read more
Fastening screw for securing components inside appliances. Replaces lost, stripped, or damaged screws during repairs or part installations.
Bought and installed new hinges. Repair took about an hour but I also cleaned all the glass inside and out on both oven doors. I had ordered extra screws as I read the old ones that hold the hinges were hard to get in as they were self taping but the screw labeled 5 next to the hinge were not the right ones. All old screws worked fine. You just need to put a little power to them to get them started. Easy repair. Read more
Mixer won't turn off or stuck at one speed? This flat spring restores tension to the speed control mechanism. Common fix for speed link issues.
After disassembling the upper half of the mixer, I found out that the Speed-link was broken, the flat spring was missing. Replaced Phase control board, Speed-link and flat spring. Now it works as good as new. Read more
Replacement spring for stand mixer beater shaft assembly. Secures to lift rod with nut and washer. Install if original spring is missing, broken, or lost.
Replaced the part. Read more
If your mixer makes excessive noise or vibrates during operation, a worn spring seat cap may be the cause. This part centers and secures springs for smooth, quiet performance.