Kitchenaid Kudm25shbl1 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9741232
Quantity of ONE.
Size: 8-18 x 5/8 inch.
(#8 screw, 18 threads per inch, 5/8 inch long)
Do-It-Yourself Stories from Customers like You
My dishwasher was leaking out copious amounts of water while cycling Michael K. • Oakland , MI • July 11, 2019
While at my sister's house, she showed me how to access & dismantle the housing unit on her dishwasher, thinking the issue might be from that area. So, when I came home, I opened up my housing unit and found that several of the screws had come out and the pump outlet seal was stretched out and partially outside of the unit itself. I located all of the missing screws & discovered I was still missing one, which my husband helped me order with the pump outlet seal. I easily replaced the old seal...
Read more
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9740674
This drain cover gasket seals the drain/pump cover at the bottom of the dishwasher tub to keep wash water contained. Replacing a cracked or flattened gasket helps stop leaks from the base and protects nearby components.
- Creates a watertight seal between the drain cover and sump opening
- Helps prevent leaks onto the floor or into the dishwasher base during cycles
- Common signs of failure: puddles beneath the unit, dampness in the base, or a visibly hardened/cracked gasket
- Good practice to replace when the drain cover is removed for service to ensure a proper reseal
What's included: 1 drain cover gasket Install notes:
- Disconnect power and shut off water supply before servicing
- Remove the lower rack (and spray arm if required) to access the drain cover per your model
- Clean mating surfaces; install the new gasket evenly without twists
- Reassemble and run a short cycle while checking for leaks
Do-It-Yourself Stories from Customers like You
Debris got into the impeller and broke it Thomas L. • Westport , MA • November 30, 2014
Replaced the drain & wash impeller kit.
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3378186
Dishwasher middle wash arm manifold tube holder. This holder will have a split at the 3:00 position for easy removal from the manifold tube.
Do-It-Yourself Stories from Customers like You
The wash arm broke off plastic arm holder fell apart and the arm fell onto the heating element and burnt Vika K. • Salem , MA • June 20, 2016
I ordered a replacement arm and the holder. Im glad i ordered additional holder because the one that was included into the wash arm kit came in broken. Other then that - the replacement itself was easy and I was done in about 10 minutes or less. All works great now!
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3373234
This dishwasher door spring bushing—also called a door spring bearing—sits at the spring's frame anchor to provide a pivot and reduce wear. Replacing a worn bushing restores door balance and helps prevent the door from dropping or slamming open.
- Provides the pivot/anchor surface for the door spring at the cabinet frame
- Maintains balanced door opening and closing force
- Reduces friction, wear, and squeaks at the spring connection
What's included: Includes 1 bushing. Install notes:
- Disconnect power at the breaker and shut off water supply.
- Remove the toe panel and mounting screws; slide the dishwasher out slightly to access the door springs.
- Support the door, release spring tension, replace the bushing at the frame anchor, and reattach the spring.
- Inspect both sides and replace worn components in pairs to keep door tension even.
Do-It-Yourself Stories from Customers like You
The dishwasher door spring broke. Rachael T. • Junction City , OR • November 07, 2022
I ordered the parts, deciding that if one spring had broken, the other one should probably be replaced at the same time. I followed the suggestion of ordering the door spring bearing given on the ordering page, and since I had not yet pulled out the dishwasher, did not know that it was not used in this older model. However, the order arrived quickly (4 days), and they are genuine Whirlpool, made in the USA, parts. The access to the sides of the dishwasher where the springs are attached...
Read more
More
$6.95
- Compare At:
-
$8.27
- You Save:
-
$1.32
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3378144
This is the dishwasher manifold tube only. It attaches to the bottom of the upper rack. For the complete kit order 675808. Also consider checking the mount that attaches this manifold tube to the dishrack. For the mount order WP8539324.
Do-It-Yourself Stories from Customers like You
Rotted manifold tube Joseph L. • Hermantown , MN • December 26, 2015
Part was updated from original equipment (3 pieces) to a one piece tube.
Snip the top of hanger loop then install. Just a couple minute job.
Updated tube is much better than the original design.
Read more
More
$44.95
- Compare At:
-
$53.94
- You Save:
-
$8.99
Genuine Whirlpool part
By: Whirlpool
Part Number: 8194582
includes seal
Do-It-Yourself Stories from Customers like You
Pump needed replacement cause nut that holds it on melted to the threads. Deborah S. • Lincoln , NE • November 06, 2017
Replaced nut and then found we needed new pump.
Read more
More
$52.33
- Compare At:
-
$62.80
- You Save:
-
$10.47
Genuine Whirlpool part
By: Whirlpool
Part Number: 72032
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$17.76
- Compare At:
-
$21.13
- You Save:
-
$3.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489069
Size: 1/4 inch hex head, 10-12 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Broken handle foot pedal and missing parts Donald M. • Lake Arrowhead , CA • April 05, 2015
This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy!
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: 4392899
Bottle with brush. Color: Biscuit paint. It's point-six fluid ounces.
Do-It-Yourself Stories from Customers like You
Lack of accurate control on 2 electric range burners Jeff D. • Neenah , WI • April 09, 2016
Ordered 2 infinite burner controls from Appliance Parts Pros and watched the online video on the replacement of them at the same time. When they arrived promptly, I was ready to take on the job.
The fix only took about 15 minutes because I was prepared after watching the video.
Read more
More
$17.76
- Compare At:
-
$21.31
- You Save:
-
$3.55
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3374077
Size: 7 foot long.
Do-It-Yourself Stories from Customers like You
Bought a used dishwasher in excellent shape that needed the drain pieces to get it going Johnny R. • San Antonio , TX • April 14, 2015
Bought the parts and connected same...a breeze in finding and receiving and eventually installing these parts.
Read more
More
$62.78
- Compare At:
-
$74.71
- You Save:
-
$11.93
Genuine Whirlpool part
By: Whirlpool
Part Number: 350956
Almond. Size: 13 oz. can. Acrylic appliance paint.
Do-It-Yourself Stories from Customers like You
Age no money to fix it Ronald V. • Cape Coral , FL • August 01, 2015
Was able to match it pretty well the natural age difference was good. The delivery of the product was amazing it took less than 24 hours to get to me and that was standard shipping. Give you guys an A for great !!
Read more
More
$30.52
- Compare At:
-
$36.32
- You Save:
-
$5.80
Genuine Whirlpool part
By: Whirlpool
Part Number: W10428773
This circulation pump and motor assembly moves wash water through your dishwasher's spray arms to clean dishes. Replace a worn or seized wash motor to restore proper spray pressure, quieter operation, and consistent cleaning performance.
- Circulates wash water through the spray arms during wash and rinse cycles
- Restores cleaning performance when the original wash motor won't run or is weak
- Typical symptoms: no/weak spray action, dishes still dirty, loud humming or grinding during wash
- Leaks at the pump housing or shaft area can indicate the assembly has failed
What's included: 1 circulation pump and motor assembly Install notes:
- Disconnect power at the breaker and shut off the water supply before servicing
- Remove the toe panel and slide the dishwasher out to access the underside
- Have a towel or pan ready for residual water; disconnect wiring and hoses, noting their orientation
- Transfer and secure existing clamps/mounting hardware as needed; ensure seals are properly seated and test for leaks after reassembly
Do-It-Yourself Stories from Customers like You
Blown dishwasher pump. Paul M. • Littleton , CO • December 10, 2018
I called AppliancePartsPros, talked to a technician to validate problem, ordered part.
I had a great talk with the technician. Told him I have electrical engineering experience, used to fix pinball machines and that the pinballs and home appliances were the same design, i.e. inductor in series with a switch across the hot lines. After that the conversation was like two long lost cousins talking at a family barbeque! Great customer service!
Read more
More
$343.73
- Compare At:
-
$407.65
- You Save:
-
$63.92
Genuine Whirlpool part
By: Whirlpool
Part Number: WP719929
This small check ball sits inside a check valve to allow one-way water flow. Replacing a worn or missing ball helps prevent backflow and supports reliable draining performance between cycles.
- Maintains one-way flow through the valve to stop water from returning after the pump stops
- Helps ensure complete, consistent draining
- A damaged, swollen, or missing ball can let water back up into the tub/sump
- Contribute to slow or intermittent draining and unusual gurgling/flow noises
What's included: 1 check ball. Install notes:
- Disconnect power and shut off water before servicing
- Access the check valve assembly per your model's service information (commonly at the sump, pump outlet, or drain connection)
- Clean the valve seat/passage; remove debris that could prevent sealing
- Place the ball in the valve seat as shown in your model's parts diagram; reassemble and test for leaks and proper flow
Do-It-Yourself Stories from Customers like You
Dishwasher didn't drain Frank C. • Mcallen , TX • June 02, 2016
Cleared out trash from pump.
Made E-Z by your exploded views and videos. Replaced worn parts.
Read more
More
$6.95
- Compare At:
-
$8.34
- You Save:
-
$1.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP72107
Color: Almond
Do-It-Yourself Stories from Customers like You
Broken meat drawer Jesse B. • Stow , MA • January 26, 2015
Replaced. Shippping was very fast. A good experience.
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9742983
Comes with axle clip.
Do-It-Yourself Stories from Customers like You
The upper dishrack broke where the roller attaches.. Darrell D. • Morton , TX • February 11, 2024
Replaced the upper dishrack assembly and its rollers.
Read more
More
$7.57
- Compare At:
-
$9.08
- You Save:
-
$1.51
Genuine Whirlpool part
By: Whirlpool
Part Number: 8193716
This adjustable leveling leg threads into the appliance base to set height and stabilize the cabinet. Replacing a worn or missing leg helps stop rocking and vibration and helps maintain proper alignment for reliable operation.
- Provides adjustable support at one corner of the appliance
- Helps level the unit for correct alignment with floor or cabinetry
- Reduces rocking, vibration, and rattling noises
- Replaces stripped, bent, cracked, or missing leg
What's included: 1 adjustable leveling leg Install notes:
- Disconnect power and, if applicable, shut off water before servicing
- Carefully support or brace the appliance to access the base safely
- Start the new leg by hand to avoid cross-threading; adjust height gradually
- Use a level to check side-to-side and front-to-back, then recheck after positioning
More
$43.95
- Compare At:
-
$52.30
- You Save:
-
$8.35