Maytag Cwe 4800 Parts

The Water Filter Bypass Plug is an OEM part for GE refrigerators. It allows the refrigerator to operate without a water filter by creating a direct connection for the water flow.

Causes of a bad Water Filter Bypass Plug can include wear and tear from regular use, damage from improper installation or removal, and degradation of the sealing components that ensure a tight fit.

Symptoms of a bad Water Filter Bypass Plug include:

• Water leaks from the filter housing
• Reduced or no water flow to the dispenser or ice maker
• Error messages related to the water filter on the control panel
• Improper fit or difficulty in installing the bypass plug

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Water Filter Manifold is an OEM replacement part for GE refrigerators. Its primary function is to channel and distribute water from the external water supply to the refrigerator's water dispenser and ice maker. This manifold serves as a connection point for the water filter, ensuring that water is properly filtered before reaching the dispenser and ice maker.

Causes of a bad filter manifold can include wear and tear from repeated filter changes, cracks or breaks due to impact, or leaks from deteriorated seals.

Symptoms of a bad filter manifold include:

• Leaks around the water filter area
• Reduced water flow or pressure
• The water filter not fitting securely
• Unusual tastes or odors in the filtered water

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This main control board is the refrigerator's central control, coordinating cooling, defrost, fans, and lights. Replacing a failed board can restore stable temperatures and proper operation when electronic faults prevent the unit from cooling correctly.

• Regulates compressor and fan operation to maintain set temperatures; failure may cause no cooling, warm sections, or constant running
• Controls automatic defrost timing; faults can lead to frost buildup and restricted airflow
• Distributes power and signals to sensors, lights, valves, and fans; issues may present as unresponsive controls or error codes
• Coordinates ice maker and dispenser logic on applicable models; failures may leave ice/water functions inoperative

• Disconnect power before servicing; use ESD precautions and handle the board by the edges
• Access the board behind the rear service panel; photograph wire/connector locations for reference
• Move connectors one at a time to the new board; secure the board and reinstall the cover
• Restore power and allow up to 24 hours for temperatures to stabilize

The Connector Gear Pinion is an OEM part for GE refrigerators. It is integral to the smooth operation of the freezer drawer, connecting the rail system and allowing the drawer to open and close effortlessly.

Causes of a bad connector gear pinion can include general wear and tear over time, excessive force applied during operation, or debris causing obstructions within the mechanism.

Symptoms of a bad Connector Gear Pinion include:

• Difficulty in opening or closing the freezer drawer
• Unusual noises such as grinding or clicking when operating the drawer
• The drawer not staying aligned or properly seated on the rails
• The drawer getting stuck or not moving smoothly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Temperature Sensor Seal is an OEM part for GE refrigerators. This seal is designed to protect the temperature sensor from moisture and other environmental factors that could affect its accuracy and longevity. By providing a barrier against the harsh conditions within a refrigerator, such as humidity and temperature fluctuations, this seal ensures that the sensor can accurately monitor and control the refrigerator's internal temperature.

Causes of a malfunctioning Temperature Sensor Seal can include wear and tear over time, degrading the seal's effectiveness. Physical damage like tears or punctures can allow moisture to reach the sensor. Improper installation may leave gaps or loose areas around the sensor, compromising the seal.

Symptoms of a bad Temperature Sensor Seal include:

• Inaccurate temperature readings.
• Condensation or frost near the sensor location.
• Frequent cycling or unusual patterns in the refrigerator's cooling process.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drain Tube is an OEM part for GE refrigerators. It is responsible for directing defrost water to the drain pan located beneath the appliance, where it can evaporate safely. 

Causes of a bad drain tube can include blockages from debris or ice, physical damage such as cracks or splits that allow water leakage, or a disconnection from its fitting points due to improper installation or material fatigue.

Symptoms of a bad Drain Tube include:

• Water pooling at the bottom of the refrigerator compartment
• Ice accumulation in or around the freezer area
• Leakage of water onto the kitchen floor beneath the refrigerator

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This 3000-watt, 4-pass broil element provides the intense top heat your oven needs for searing and browning. Replace a burned-out top element to restore consistent broil performance.

• Supplies direct, high heat from the top of the oven during Broil
• Common fix for no heat in Broil mode
• Helps resolve weak or uneven browning from the top
• Replace if the element is blistered, cracked, or arcing

• Disconnect power at the breaker and allow the oven to cool completely before servicing
• Remove mounting screws, gently pull the element forward to access wires, and transfer connections one at a time
• Support the element and avoid flexing it; ensure terminal insulators/boots are intact
• Reinstall with existing hardware, secure connections, and test the broil cycle

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

• Loose or wobbly components within the appliance
• Panels or parts that are not securely attached
• Rattling or unusual noises due to loose parts
• Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Left side

This compressor start device is the relay-and-overload assembly that helps your refrigerator's compressor start and protects it from overheating. Replacing a failing start device can stop repeated clicking and help restore consistent cooling performance.

• Provides the initial start circuit for the compressor, then disengages once running
• Protects the compressor by opening on overcurrent/overheating (overload protection)
• Helps address symptoms like: compressor won't start, repeated clicking, and warm fridge/freezer
• Often found heat-damaged or cracked when failed

• Disconnect power before servicing; access the compressor compartment at the rear
• Note wire positions; pull the old start device straight off the compressor pins
• Transfer wires to the new device; push it fully onto the compressor terminals until seated
• Reinstall the rear cover and restore power; verify normal compressor start

The Crossbar Pin is an OEM part for GE refrigerators. It is a small but essential component that secures the crossbar in place within the refrigerator's interior. This pin ensures that the crossbar, which supports various shelving and storage configurations, remains stable and functional.

Causes of a bad Crossbar Pin can include wear and tear over time, accidental impact or damage during loading or cleaning, or corrosion due to moisture exposure. These factors can compromise the integrity of the pin, leading to instability in the crossbar.

Symptoms of a bad Crossbar Pin include:

• Shelves or storage bins not sitting level
• Difficulty in adjusting or removing the crossbar
• Noticeable wobbling or instability in the crossbar

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This articulating mullion assembly is the folding center strip for the fresh food section. It mounts to one refrigerator door and swings over the center gap to complete the door seal, helping maintain temperature and reduce condensation.

• Folds over the gap between doors to create a reliable air seal
• Helps keep cold air in and warm air out for consistent cooling
• Replaces a broken, cracked, or misaligned flipper that won't fold or latch properly
• Common symptoms: moisture or frost between doors, doors not closing/sealing, or temperature fluctuations near the door opening

• Disconnect power before servicing.
• Open the doors, remove any covers/screws securing the mullion, and note orientation for reassembly.
• Transfer any reusable trims/caps from the old mullion to the new assembly if required.
• Verify smooth folding action and full gasket contact before restoring power.

This is the left fresh food door gallon bin that mounts on the refrigerator door to hold large containers and tall bottles. Replacing a cracked or missing bin restores secure storage and everyday organization on the door.

• Mounts to the left fresh food door to hold gallon-size jugs and tall bottles
• Restores original door storage capacity and keeps items from tipping during use
• Common failure signs: cracked plastic, broken mounting tabs, loose fit, or the bin falling off
• Damage can lead to items rattling or spilling and reduced usable space

• Remove any items from the bin, then lift up and out to release it from the door liner
• Align the new bin's tabs with the molded slots on the left fresh food door and press down until fully seated
• Compare to your original bin to confirm orientation; left- and right-hand bins often differ in shape
• Handle plastic carefully; allow the bin to warm to room temperature before installation to reduce the risk of cracking

The Bake Element is an OEM part for Whirlpool ranges. This heating element is responsible for providing the necessary heat for baking and roasting by distributing heat evenly throughout the oven cavity, ensuring consistent cooking results.

Over time, bake elements can wear out or fail due to regular use, exposure to high temperatures, or accidental damage during cleaning. 

Symptoms of a bad bake element include:

• Oven not heating to the set temperature
• Uneven cooking or baking results
• Visible signs of damage such as burns, blisters, or breaks in the element
• The element not glowing red when in use

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This freezer door bin support secures the door bin to the freezer door liner, keeping it level and firmly in place. Replace a cracked or missing support to restore stable storage and prevent the bin from popping off the door.

• Supports and locks the freezer door bin to the door liner
• Helps prevent bin wobble, sagging, or unexpected drops
• Replace if tabs are broken, the support is cracked, or the bin won't stay seated
• Common symptoms: bin tilts, falls off, or rattles on the door

• Unplug the refrigerator and remove items from the bin before servicing
• Lift out the door bin to access the support
• Release the old support from the liner; align and press the new support fully into place until secure
• Reinstall the bin and confirm a snug, stable fit before restocking

The Broil Pan Set is an OEM part for Whirlpool ovens. This set includes a broil pan and an insert, designed to catch drippings and ensure even heat distribution during broiling, allowing for perfectly cooked and crisp results.

Causes of a bad broil pan set can include prolonged exposure to high temperatures, which may lead to warping or distortion of the pan. Additionally, frequent use without proper cleaning can result in rusting, chipping, or buildup of residues that compromise the pan's functionality and safety.

Symptoms of a bad broil pan set include:

• Warping or bending of the pan
• Presence of rust or corrosion
• Surface chipping or flaking
• Difficulty in achieving even cooking results

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.