Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Secures the outer boot seal clamp for a watertight seal around your washer door. Replace if you notice leaking around the door during cycles.
Replaced all rubber and plastic hoses coming into and exiting the washer discharge pump. They where gummed up with mold and slime. WOW it stopped all odor from discharge into the utility sink. This model required that the whole front of the washing machine be removed which was very intimidating, but after watching the video from Appliance Parts Pros it was easy, I also replaced discharge pump and the bellows since I had it apart anyway and it was 5 years old. Thank you Appliance Parts Pros I... Read more
Washer won't fill or leaks when off? The water inlet valve controls water flow during fill cycles. DIY repair in under 30 minutes with video guide.
The F20 code was low/no water pressure code. I watched a YouTube video and purchased a Water Inlet Valve from Appliance Pros. After my son installed the new part my washer still didn't work. I looked on Google for trouble shooting and the 1st thing it said was turn on both hot/cold water as the washer needs the pressure of the hot/cold water. I had turned off the hot valve because it was leaking. I assumed I could still do cold water loads. Read more
Secures the inner door boot seal to prevent leaks in front-load washers. Replace if damaged, corroded, or when seal won't stay in place. Verify fit.
Ordered and replaced the bellows. The video was a great help; but as others have mentioned, later models have small differences. Check your model number. I'll second everything said in the review dated Nov 10, 2018; including the part about getting an assistant to hold the outer retention ring in place while you are stretching the spring. Read more
Fix washer low flow errors, no water filling, or continuous dripping into the tub. Water inlet valve controls fill cycles. DIY repair in 10-15 minutes.
Replaced both hot and cold water inlet valves. Works like a charm, issue resolved. Read more
Washer won't fill or water leaks? This water inlet valve assembly controls water flow during wash cycles. Common DIY repair, typically 30-45 minutes.
Replaced water inlet valve assembly Read more
Drain hose for washing machines. Connects tub to pump to carry water during drain cycles. Replace if cracked, leaking, or damaged. Includes anti-siphon ball.
Repairing the problem was the easy part. Diagnosing the problem took a little more time. To diagnose the problem, it took longer because I first cleaned the Drain Pump trap from all the material it collected. Socks, hair pins, and other materials that were not cleaned from pants pockets. It then still did not drain. Repeated the process after finding more materials and a toy that punctured the hose between the tub and the drain pump. Running the drain and spin cycle takes about 11... Read more
Secures the door boot seal to prevent leaks during wash cycles. Replace if water leaks from the washer door or when installing a new bellow. Confirm fit.
Watched a youtube video and it was easy to do. Read more
White acrylic spray paint for appliance exterior touch-ups. Restores worn, chipped, or scratched surfaces on refrigerators, ranges, and more. 13 oz can.
Replaced It With New One Read more
Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.
Touch up paint Read more
Secures the door seal to your washer tub to prevent leaks. Replace if washer leaks from the door or clamp is damaged or missing. Confirm fit with your model.
Followed your video instructions. It was invaluable. The toughest part was getting the seal on the back of the drum. Your technician made it look very easy. Once that was on, the rest was pretty easy. The control panel on my Whirlpool Duet washer had a holding screw at the bottom center of it. It wasn't shown in the video, but it was easy to figure out. If you are changing the boot, change the clamp as well. Read more
Washer won't start or shows door lock error? The door strike secures the latch for safe operation. Easy 5-minute fix with just two screws—video available.
Removed and replaced the door switch. Best service I just watched their video on it and it was a snap ordering was no problem. Very easy got the switch and plunger when they said with no delays . Very good service I will come back if I need more parts with out hesitation thanks. Read more
Adjustable front leveling foot for washers. Supports and stabilizes the machine on uneven floors. Replace if cracked, worn, or missing threads.
REPLACING THE SUSPENSION PADS AND REPLACE THE BALNCE RING EVEN IF MY DIDN'T LEAK ANY FLUID OUT OF IT... IT SOLVE THE PROBLEM, IT WORKS BETTER NOW THAN IT EVER DID, THE ONLY THING I COULD COME WITH IS THE MANUFACTURE PUT THE WRONG BALANCE RING IN IT TO START WITH... MY IS A 400 KENMORE TOP LOADER, IT IS THE EASIES WASHER I HAVE EVER TAKEN A PART.. I WISH CARS WERE THAT EASY... IT TOOK ME OVER A MONTH FIGHTEN THIS PROBLEM UNTIL I FOUND IT ON YOUTUBE... WHAT BLESSING IT WAS... Read more
Fix F5 E2 or E3 error codes with a new washer door latch. Solves doors that won't lock, cycles that won't start, or clicking latch issues. DIY repair.
Watched a quick YouTube video. Read more
Secures water and drain hoses in washers to prevent leaks. Replace if connections loosen or clamp shows corrosion. Confirm fit with your model number.
First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available.... Read more
Replace your washer drive belt when the drum won't spin or you hear squealing noises. Connects motor to tub for wash and spin cycles. Confirm fit with model.
Using a nut driver I removed the sheet metal screws, removed the old belt and replaced it with the one. An easy repair. Shipping was EXCELLENT! Read more
Fix washer overfilling, continuous filling, or F8 E1 error codes with this water inlet valve. DIY repair typically completed in under 45 minutes.
Replaced water inlet unit. Read more