Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Dryer won't start or run? A faulty belt switch often causes this when the belt snaps or slips. This switch monitors belt tension and is a fairly easy fix.
Replaced motor "triple switch" Part Number: AP6021090 and the thermal fuse Read more
If your dryer motor has come loose or makes grinding noises, this motor clamp secures the drive motor. Simple DIY repair with basic tools in under an hour.
Took it apart. Replaced various general maintenance parts, rollers, seals, clean out all the lint and replaced motor and put a new blower on it. Read more
Door hinge assembly that mounts the dryer door to the cabinet. Replace if hinge is cracked, broken, or door sags. Supports smooth door opening and closing.
Seals the glass panel in your dryer door to prevent air leaks and maintain drying efficiency. Replace if damaged, melted, or loose. Verify fit by model.
Dryer not drying or making loud noise? A loose or damaged blower pulley stops airflow. Use thread locker during install. 45-minute DIY repair.
Replaced the blower pulley. When the pulley spins off the blower shaft, it will damage the threads so it is important to replace the pulley and I would recommend using Loctite thread locker to keep the new pulley from spinning off. The threads on the blower shaft will most likely get damaged as well and I would recommend replacing the blower shaft. I did not order the blower shaft because it does not show up on a diagram and I had to go purchase a die to chase the threads before the new pulley... Read more
Includes two bumpers and two locking clips for securing dryer panels. Replace if clips are broken or missing to prevent rattling. Confirm fit with your model.
Our 19 year old Whirlpool dryer quit heating. After checking the thermal fuse, I found the ignitor electrically open. I bought an ignitor at a local store as there was a national holiday the next day and I did not want the dryer inoperative waiting several days for shipping. I can say AppliancePartsPros is MUCH cheaper for the identical Whirlpool genuine part. While changing the ignitor, I noticed there was an excessive amount of lint in the dryer, which was caused by worn drum seals. I ordered... Read more
Dryer door won't stay closed? This door strike engages with the catch to secure the door. Simple DIY fix in minutes with basic tools and video guide.
Removed and replaced with new strike and catch. Per instruction video. Read more
Distributes load under drum support fasteners to prevent hardware loosening. Replace if worn, cracked, or causing noise. Confirm fit with your model number.
Simple fix, right parts fast. Read more
Flexible narrow brush reaches under and behind refrigerator cabinet to clean condenser coils and vents. Replace worn or missing brush to remove dust buildup.
Replaced bad condenser motor Read more
Replacement screw for securing panels, brackets, and internal components. Needed when original hardware is stripped, missing, or damaged during repairs.
We replaced the broken door hinge. Read more
Fix rattling or gaps at the top of your dryer with this front top panel lock. Secures the panel to the cabinet frame for a tight, aligned fit.
With the thermister Read more
Secures the lower access panel to your dryer base. Replace this clip if broken, rusted, or missing to keep the front toe kick panel properly aligned.
I ordered new pulley and keeper pins. I gently lubed and pushed it in slowly. It was magnificent. So tight yet a perfect fit. I'm so satified. Read more
Replace missing, stripped, or corroded mounting screws that secure panels, brackets, and covers in your refrigerator. Restores proper alignment.
Ordered two parts & easily installed them .. All fixed & I'm a 70 yr old grandma. ?? Read more
Replaces a broken, cracked, or missing lint screen door cover on your dryer. Installs on the lint filter assembly to restore proper closure.
Open dryer door. Remove four Phillip head screws that hold lint assembly together. Two inside and two on the outside. There is also a hex head screw behind the front panel. To get at it I removed the four hex heads at bottom of front panel and four star head screws on left side of front panel. I was able to get at it by pulling the front panel out as much as possible and and reaching from the side with small quarter inch socket. Remove lint assembly, vacuum out everything and replace with new... Read more
Replace a cracked or missing dryer mounting bracket to keep components securely aligned. Restores support to prevent movement and premature wear.
Disassembled dryer, replaced worn parts and reassembled dryer. Removed top cover, disconnected front connector, removed front panel, removed belt from idler pulley, removed washer drum and belt, replaced push clip, retaining clips, 2 support rollers and idler pulley. Reassembled in reverse order. Read more
Fixes excessive vibration and rattling from dryer motor movement. This clamp secures the motor to its bracket, restoring stability. DIY-friendly repair.
Replaced the motor, blower, rear drum felt seal, and drive belt. Vacuumed up the lint everywhere, cleaned extra lint out of the chute, around the blower, and rear vents. Read more