Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Adhesive for securing dryer door gaskets, lint screen felt, and seals. Heat-resistant silicone formula bonds rubber and fabric parts that crack or peel.
Seal and adhesive. Read more
Dual roller assembly for trash compactor drawer glide system. Replace when rollers are worn, cracked, or drawer slides hard. Installs on compactor base.
Rood Cause #1: One of the front roller bearings was worn out and did not spin freely. Solution #1: I replaced the two front roller bearing assemblies (both included 2-pack). Rood Cause #2: The bottom surface of the compactor slide-out assembly had become deformed (convex) most likely due to the repeated force of compaction over the years. This bottom surface rubbed against the lower frame as evidenced by removal of paint (bare metal was exposed). Friction prevented the compactor drawer... Read more
Burner grate sits on top of your range cooktop to support pots and pans. Replace if cracked, chipped, discolored, or coating is flaking off.
I ordered four replacement grates at a savings of $100 off the price quoted to me by a local appliance repair company. Read more
Microwave says 'close door' when already closed? Door switch failure is the likely cause. Most DIYers replace all three switches together in 30-60 minutes.
It is difficult (if not impossible) to remove the electronic switches from the hard plastic latches. I replaced all three switches and both the upper and lower latches I also replaced the main 20 amp ceramic fuse which blew out when the latch/switches failed. Read more
Burners won't light or spark intermittently? This spark module controls ignition for gas burners. Moderate DIY repair, typically behind control panel.
Replaced module: Although the new module was slightly different due to a third or ground terminal that was not on the original I managed to figured out that I did not need to worry about the ground since the existing wiring had already allowed for the connection. Easy repair. I ordered the part one day and it was delivered the next and that was using the least expensive delivery service. You guys are great Read more
Compactor won't run or ram doesn't reverse? Replace the drive motor. Moderate DIY repair with detailed instructions. Compatible with most models.
Replaced the motor with a direct replacement part. The wiring was not the same because the switch on the motor was different. The instructions that came with the motor were enough for me to figure out what to do. Read more
Secures panels, handles, and components on your range. Replace this screw if it's stripped, missing, or damaged during door or handle repairs.
Using the parts I ordered, I replaced the glass myself following the very helpful video on your web site. Read more
Microwave won't heat or shows F1E5 error? The inverter regulates power to the magnetron. Intermediate repair, 1-2 hours with full disassembly required.
Replaced numerous items including this Inverter and two control boards but the Magnetron was the ultimate solution. The tip was clearly burned through when I removed the original. Read more
Holds compactor bags securely during operation. Replace if cracked, broken, or handles are damaged. Installs inside compactor drum for easy bag removal.
Ordered the part, which arrived incredibly fast and switched out old one for the new. Read more
Replacement roller bearing for trash compactor drawers. Installs on tracks to support smooth gliding. Replace worn or damaged bearings for easier operation.
Bot both sets of roller bearings, lower ones on the appliance and the set on the trash can that rolls out. I just followed the instructions that were in the roller bearing package and only needed the tools that are recommended. Was a little tricky with the nuts, really need a person with "small" fingers to reassemble the nuts back on the lower set of bearing that are on the appliance. All in All, went well and works. Found that the new bearings are v. tight on the machine, being new, so, use... Read more
Replace your microwave's halogen light bulb to restore interior visibility. Rated 12V, 10W. Easy DIY fix when bulb burns out. Confirm fit by model number.
Opened and changed after unplugging first. Read more
Replacement handle for trash compactor containers. Installs on the front of the compactor bin for easy pull-out access. Order if your handle is cracked or broken.
We called the phone number on the unit, gave them the model number and the price of the replacement handle including tax and shipping was $112.00. We then looked on line at Appliance Parts Pro and got the identical part including tax and shipping for $70.00. When the part arrived it took about ten minutes to remove the old handle and install the new one. Read more
8-18 x 1/2 inch mounting screw for securing drawer glides, brackets, and oven door components. Replace missing, stripped, or damaged screws during repairs.
Whenever the drawer was opened, it would fall of the guide rails. This lead to the drawer being crooked several times. I took the drawer out and noticed one of the glides was missing. Ordered a new pair, popped it on and now the drawer slides properly. Read more
Fix burners that won't spark or ignite. This switch harness connects igniters to controls. Takes 1 hour with basic tools and torx driver.
I called a rpair service. The men came to the house, torn apart the stove top and advised Replacement of the wire harness. The trip charge of $100 would be deducted from a repair bill of $350, thus they needed an additional $150 for parts and $100 for labor after paying the trip charge. I bought the harness for $60, and the star bits I needed for my drill for $10. My son and I installed the new harness in about 30 minutes, which included a thorough cleanup, saving us $180. Read more
Charcoal filter for over-the-range microwaves removes odors and recirculates air. Replace every 6-12 months for optimal performance. Verify fit by model.
Replaced it. Read more
Black door handle for trash compactors. Replaces cracked, broken, or loose handles on the front panel. Easy DIY installation with three screws.
Our trash compactor requires you to step on foot pedal to open the door. After several years of people pulling on it without using the pedal cased it to crack. Several attempts to glue it failed to mend the crack. Ordered a new handle, got it in a couple days, fit right up, three screws and now it's good as new. Read more