Ecb Parts

The Electronic Control Board is an OEM part for GE ovens. This component manages the oven's various functions, such as temperature regulation, cooking modes, and timing.

Common causes of failure include electrical surges, component wear over time, or exposure to moisture and high temperatures. A defective control board can lead to improper functioning of the oven's features and settings.

Symptoms of a bad Electronic Control Board include:

• Oven not heating or not maintaining the set temperature
• Display not working or showing error codes
• Unresponsive control buttons
• Oven shutting off unexpectedly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Control Timer is an OEM replacement part specific to Whirlpool washers. It is the electronic component responsible for governing the sequence and duration of wash cycles. Located inside the control console, the timer works with the control dial to initiate various wash/rinse phases based on the selected settings.

Causes for timer failure may include water exposure corroding electrical circuits or repeated rapid switching wearing out internal switches.

Symptoms of a faulty control timer include:

• Inability to advance through complete cycles
• Random operation of rinse or spin functions
• Premature termination of cycles before finishing
• Failure to respond when turning the cycle selector

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Restore a responsive control panel with this configured user interface control board. It reads your button selections, drives the display/indicator lights, and communicates with the main control so your dishwasher can start and run the chosen cycle.

• Interprets touch/button inputs and sends commands to the main control
• Powers LEDs and status indicators on the control panel
• Enables Start/Cancel, cycle selection, and lock functions
• Common symptoms: unresponsive controls, no panel lights, intermittent/erratic button response, won't start though power is present

• Disconnect power at the breaker before servicing to prevent electrical shock
• Access the board by removing the control console/inner door as directed by your model's service information
• Handle the PCB by the edges and use ESD precautions; move connectors and any mounting hardware over one at a time
• Ensure ribbon/plug connectors are fully seated; test operation before final reassembly

The Timer is an OEM replacement part for Whirlpool washers. This electronic part is essential for accurately tracking washing cycles and automatically shutting off the washer at the end of the selected time period.  

Symptoms of a bad timer include:

• Cycles failing to complete fully and the washer not turning off automatically
• Inaccurate timekeeping causing under or over-washing of clothes
• The dial not rotating smoothly between settings or options  

Causes of a bad timer can include normal wear over years of use. The internal timekeeping components can degrade or fail due to repeated power cycling of the washer.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.

The PCB Assembly is an OEM component for LG ranges. It is the circuit board responsible for controlling critical range functions such as the oven, cooking elements, and display. 

Symptoms of a bad PCB assembly can include: 

• Range elements not working properly 
• Display malfunctions or failures 
• Improper functioning of oven features like bake, broil, and convection modes 

Causes of a bad circuit board tend to be normal wear and tear over time from heavy usage and heat exposure during cooking. Occasional power surges or fluctuations can also potentially cause circuit damage. 

This OEM LG part is also compatible with Sears/Kenmore.

The Cntrl-elec is an OEM part for Whirlpool washing machines. It is the electronic control board that directs all wash cycle functions such as temperature, spin speed, water levels, and more. The control board uses embedded programming to operate components based on selected cycles and settings.

Causes of a bad control board can include water damage, power surges corrupting electronics over time, or failures in integrated microchips and supporting mechanisms.

Symptoms of a bad washing machine control board include:

• Inability to start or complete cycles
• Error codes or flashing lights indicating issues
• Unresponsive or inconsistent response to inputs and buttons
• Buzzing noises or smells coming from the control area

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Timer is an OEM component for Whirlpool electric dryers. It is the electronic component responsible for regulating preset drying cycles and automatic shutoff functions according to manufacturer specifications.

Causes of a faulty timer often involve general wear from years of extended use. Exposure to high internal temperatures within the dryer drum can degrade surface-mounted circuitry as well.

Symptoms of a problematic timer include:

• Inconsistent or incomplete cycles
• The washing machine not advancing to the next cycle
• The machine not starting at all

Compatible brands include Maytag, KitchenAid, Jenn-Air, Amana, and some Kenmore electric dryer models too. 

The OEM Electronic Control Board is an OEM replacement part for Whirlpool dishwashers. It is a circuit board that controls all of the functions of the dishwasher, including the wash cycles, water temperature, and detergent dispensing.

Causes of failure involve damage from liquid intrusion shortening circuits or component deterioration over extended use reducing precision.

Symptoms include:

• Dishwasher fails to start selected cycle
• Lights, displays or programming malfunctions
• No response from control buttons
• Dishwasher appears dead or powerless

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

The Control Board is an OEM part for Frigidaire ranges. This part manages and regulates the functions of the range, including the oven temperature, cooking modes, and timing, ensuring precise control and efficient operation.

Causes of a bad control board can include electrical surges, overheating, or component failures due to regular wear and tear.  

Symptoms of a bad Control Board include:

• The range or oven not powering on
• Inaccurate temperature settings
• The display showing error codes or not functioning properly
• Unresponsive or malfunctioning buttons and controls

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Timer Washer is an OEM part for GE washing machines. It controls the various cycles of the washing machine by regulating the amount of time each phase runs, including filling, agitating, rinsing, and spinning. The timer ensures that the laundry process follows the correct sequence and duration for optimal cleaning performance.

Common causes of a bad timer include electrical issues such as shorts or faulty wiring, wear and tear from extended use, or mechanical failure within the timer mechanism.

Symptoms of a bad timer include:

• The washing machine not advancing through cycles
• Stuck cycles or skipping phases
• The washer stopping abruptly during a cycle
• Inconsistent cycle times or improper functioning of specific wash settings

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Machine Control Replacement Kit is an OEM part for GE dishwashers, designed to upgrade or replace the existing machine control mechanism within your appliance. The control board acts as the brain of the dishwasher, managing and coordinating all its cycles and operations, from water intake and temperature regulation to cycle duration and drying processes.

Causes of a bad machine control board can include electrical issues such as short circuits or power surges, wear and tear over time, or water damage. 

Symptoms of a bad Machine Control Replacement Kit include:

• The dishwasher fails to start or complete a cycle
• Unusual noises or beeping sounds coming from the dishwasher
• The display panel is unresponsive or displays error codes
• The dishwasher stops mid-cycle or does not dry dishes properly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Configured User Interface Board is an OEM part for GE dishwashers. This component controls the user input functions, allowing you to select and customize wash cycles, and monitor the status of the dishwasher.

Causes of a bad configured user interface board can include electrical surges, moisture exposure, or general wear over time. A malfunctioning interface board can disrupt the dishwasher’s ability to receive and process user commands, affecting overall operation.

Symptoms of a bad configured user interface board include:

• The control panel becoming unresponsive
• Incorrect or no display of cycle status
• Error codes or flashing lights on the control panel
• The dishwasher not starting or completing cycles

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Washer Timer is an OEM part for GE washing machines. This part manages the sequence of operations during the wash cycle, including filling, agitating, rinsing, and spinning. 

Causes of a bad washer timer can include electrical issues such as short circuits or power surges, wear and tear of internal mechanical components, and moisture infiltration leading to corrosion.

Symptoms of a bad washer timer include:

• The washing machine not advancing through cycles
• Cycles taking longer than usual or not completing
• The machine stopping mid-cycle or not starting
• Inconsistent or erratic cycle times

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Range Control Board is an OEM part for Whirlpool ranges. This part manages and regulates the various functions of the range, such as temperature settings, heating elements, and timers. 

Causes of a bad range control board can include electrical surges, wear and tear over time, or exposure to excessive heat or moisture, which can lead to malfunctioning or failure of the board's circuitry.

Symptoms of a bad range control board include:

• The range not heating properly
• Inaccurate temperature settings
• Display errors or failure to show information
• Unresponsive touch controls or buttons

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Timer is an OEM part for Whirlpool dryers. This part manages the duration of the drying cycle. This part plays a role in the operation of your dryer, ensuring that clothes are dried efficiently and thoroughly within the predetermined time. 

Common issues include cycles that end too soon or run much longer than necessary, which can lead to clothes being damp after a cycle or excessively dry and potentially damaged. 

Symptoms of a bad Timer include:

• The dryer not starting when the timer is set and the start button is pressed.
• The dryer stops mid-cycle, which indicates that the timer contacts aren’t working properly.
• Unusual or no ticking sound from the timer.
• Clothes not drying properly due to the dryer not adhering to the selected time.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Interface User Top is an OEM part for GE dishwashers. This component houses the control panel and display, allowing you to select and monitor the dishwasher's settings and cycles. It provides an intuitive interface for managing the dishwasher's functions and is essential for the appliance's operation.

Causes of a bad user interface can include wear and tear, physical damage from pressing buttons, or faults in the electronic components.

Symptoms of a bad interface user top include:

• Unresponsive or malfunctioning buttons
• Display not lighting up or showing incorrect information
• Difficulty in selecting or changing cycles
• Error codes related to control panel issues

This GE replacement part is also compatible with some Hotpoint, RCA, and Kenmore models.