Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Sb120s2e Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Appliance Light Bulb
Genuine Whirlpool part
By: Whirlpool
Part Number: 8009

Original Whirlpool light bulb, 40 watt.

Symptoms of needing to replace the light bulb include:

  • Dimming or flickering light
  • Complete lack of illumination inside the appliance
  • Visible signs of damage or burnout on the bulb itself

Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.

Do-It-Yourself Stories from Customers like You Jennair jjw9630cas double oven doors did not close all the way and the light would not go out   Wayne W. • East Longmeadow , MA • February 13, 2016

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

More
$17.76
Compare At:
$20.96
You Save:
$3.20

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Oven Insulation
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10208653

The Oven Insulation is an OEM replacement part for Whirlpool ranges. Properly insulated walls are necessary to prevent heat loss through the oven exterior, ensuring consistent and even cooking from the inside out. 

Causes of bad insulation include the breakdown of insulating materials over time due to repeated high heat exposure during cooking. Crumbling, compressed, or discolored insulation has lost its ability to hold in heat.

Symptoms of needing new insulation include:

  • Inefficient and uneven cooking/baking performance
  • Interiors not reaching/maintaining set temperatures
  • Overheating or longer than normal cook times
  • Hot or warm oven exteriors that were previously cool to the touch

This genuine Whirlpool OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You It seems that oven insulation is a popular vacation spot for mice who want to get away from it all   Paul J. • Washington , TX • May 10, 2014

Took the stove apart*, saw where the mouse had made a nest. It was kind of like a hotel room after a rock star had used it. It was nasty, is what I'm saying. I removed the insulation, which immediately went into a garbage bag and was placed outside, whereupon I took off and nuked the site from orbit. It was the only way to be sure (actually it was disposed of in the proper manner, no nukes were detonated in the course of this repair). Anyway, I ordered the insulation from this site, which was... Read more

More
$45.95
Compare At:
$54.22
You Save:
$8.27

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Oven Igniter
Genuine Whirlpool part
By: Whirlpool
Part Number: 786324

The Oven Igniter is an OEM part for Whirlpool ovens. It is responsible for igniting the gas burner to produce heat, which is essential for baking and broiling. The igniter heats up to a high temperature and then sparks to ignite the gas, ensuring that the oven reaches and maintains the desired cooking temperature.

You should replace the oven igniter if it becomes faulty. Causes of a bad igniter can include electrical failures, wear and tear from regular use, or damage from exposure to high temperatures. A malfunctioning igniter can prevent the oven from heating properly or at all.

Symptoms of a bad oven igniter include:

  • The oven not heating up or taking longer than usual to reach the desired temperature
  • The igniter glowing but failing to ignite the gas burner
  • No visible glow from the igniter when the oven is turned on
  • The oven producing a clicking sound without igniting

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This part fixes the following symptoms
  • Little to no heat when broiling
  • Little to no heat when baking
  • Gas igniter glows, but will not light
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Broiler igniter failed   James S. • Winchester , MA • September 26, 2014

Replaced the igniter, Simple but there are several points to remember. TURN THE POWER OFF 1) remove the oven door or you will have a hard time reaching the back of the oven. Mine just lifted off. 2) The igniter tip is fragile put a drop cloth over the oven floor in case you drop it even after it is in its holder. 3) The drop cloth will catch screws too if you drop them so they won't fall into the oven. 4) The cable from the oven is very short even after pulling it out from the hole at the back.... Read more

More
$53.95
Compare At:
$64.74
You Save:
$10.79

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP681249

The Screw is an OEM part for Whirlpool refrigerators, designed to secure components of the ice maker assembly. This screw maintains the structural integrity of the ice maker, ensuring that all parts are tightly fastened to prevent malfunction or inefficiency in ice production. 

Causes of failure can include stripping of the screw threads through over-tightening or corrosion, leading to a less secure fit.

Symptoms of a bad Screw include:

  • Loose or dislodged components within the ice maker assembly.
  • Inconsistent or halted ice production due to components shifting.
  • Unusual noises emanating from the ice maker as a result of loose parts.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You The handle on the refrigerator door was broken and needed to be replaced   Richard W. • Baltimore , MD • April 12, 2015

Took off the freezer door, took off the top hinge on the refrigerator door, replaced the handle, re-installed the top hinge and the freezer door. This is a two person job - one to remove the top hinge and replace the handle, while a second person holds the refrigerator door in place. Replacing the handle was easy. The most irritating part was figuring out what parts to order. The drawing of the refrigerator door (Drawing # 4) used to figure out what parts to order was not clear. I paid $8... Read more

More
$5.95
Compare At:
$7.08
You Save:
$1.13

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488729

This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.

Do-It-Yourself Stories from Customers like You The lint catch was broken   Misti P. • Spokane , WA • January 18, 2019

This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more

More
$8.36
Compare At:
$9.95
You Save:
$1.59

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Screw (Cover)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP308685

This cover screw secures appliance panels and covers, keeping components protected and aligned. Replace missing, stripped, or corroded screws to restore a tight fit and help eliminate rattles, gaps, or panels that won't stay in place.

  • Attaches an access cover or panel to the appliance frame
  • Helps maintain proper alignment to protect internal components
  • Replaces missing, stripped, or rusted hardware
  • Typical signs: loose or rattling panel, cover won't stay secure, damaged or rounded screw head
What's included: One screw Installation notes:
  • Disconnect power before servicing
  • Support the panel while removing and installing screws to prevent misalignment
  • Start threads by hand to avoid cross-threading; do not overtighten
  • Use a matching driver bit to avoid damaging the screw head

Do-It-Yourself Stories from Customers like You Under the counter mounting brackets were missing   Douglas A. • Glen Allen , VA • June 19, 2019

After several attempts at Local Hardware stores and Lowe's and Home Depot to find them I called AppiancePartsPros.com. I gave them the model number and what I was looking for and customer service directed me to the part on the Web site. They were extremely helpful and it was very fast and I got the parts the next day. Read more

More
$7.95
Compare At:
$9.38
You Save:
$1.43

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
U-Type Nut (10B)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98234

This U-type nut clips over a sheet-metal edge to create a durable threaded anchor for a screw. It helps secure panels, trim, and brackets so fasteners hold tight and components stay aligned and rattle-free. What it does:

  • Clips onto thin sheet metal to provide captive threads where a standard nut cannot be used
  • Holds screws securely to fasten panels, trim pieces, or mounting brackets
  • Addresses issues like loose panels, missing/broken clips, or screws that will not tighten
  • Helps reduce vibration and rattling from unsecured components
What's included:
  • 1 U-type nut
Install notes:
  • Disconnect power and shut off gas/water before servicing
  • Position the U-nut over the panel edge with the threaded side aligned to the hole
  • Start the screw by hand to avoid cross-threading; tighten snugly without overtightening
  • Replace any damaged or corroded hardware to ensure a secure hold
Also known as: U-clip, speed nut, spring nut

Do-It-Yourself Stories from Customers like You Broken hinge   Ronald B. • Manchester , CT • October 21, 2019

Followed the video on how to replace the hinge I also replaced the dryer top locks while I had it open Read more

More
$11.95
Compare At:
$14.34
You Save:
$2.39

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Light Socket (Lamp Holder)
Genuine Whirlpool part
By: Whirlpool
Part Number: W10856866

This light socket holds the bulb and supplies power for reliable appliance lighting. Replace a cracked, heat-damaged, or loose socket to restore safe, consistent illumination inside the appliance.

  • Secures the lamp and connects it to the appliance wiring
  • Restores proper electrical contact to the bulb
  • Replaces sockets showing arcing, discoloration, melting, or a loose fit
  • Common symptoms: light won't turn on, flickers, works intermittently, or bulbs fail prematurely
What's included: 1 light socket Installation notes:
  • Disconnect power at the breaker or unplug the appliance before servicing
  • Allow the appliance to cool completely before accessing the socket
  • Use the bulb type and wattage specified for your model
  • Transfer existing mounting screws/brackets and wiring connectors as needed; ensure tight, clean connections

Do-It-Yourself Stories from Customers like You Light shorted out   Rex P. • Eastman , GA • September 12, 2020

Your part was a perfect replacement. Fixed in 30 minutes. Read more

More
$9.95
Compare At:
$11.74
You Save:
$1.79

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Oven Igniter, Flat Style
Genuine Whirlpool part
By: Whirlpool
Part Number: 814269

Amperage range 3.2 to 3.6

This part fixes the following symptoms
  • Won't start
  • Gas igniter glows, but will not light
  • Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You Gas oven wouldn't heat up   Derek S. • Phoenix , AZ • March 01, 2015

Replaced the oven igniter, following the general instructions on the ApplicancePartsPro.com website. It took me a little while to figure out how to get to the wiring for the igniter, as I had no access panel on the back to get to the wires. In my particular Whirlpool oven (very old model) it turned out that you have to remove the pots/pans drawer under the oven to get to the exposed wiring at the back. Once I figured this out, the rest of the replacement was a snap. Read more

More
$98.95
Compare At:
$116.76
You Save:
$17.81

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98008545

Color: Black. For biscuit order 98008169. For white order WP98008544.

Do-It-Yourself Stories from Customers like You Missing screws and bad sealing door gasket   Thomas P. • Palmdale , CA • December 15, 2015

Ordered new screws and door gasket. Replaced the old door gasket now the oven warms up faster and bakes the stuff easier. Replaced the missing door trim screws. Now the door close without making noises. Read more

More
$7.95
Compare At:
$10.99
You Save:
$3.04

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Thermostat Bulb Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: 98005642

The thermostat bulb clip is an OEM component specifically designed for Whirlpool drop-in electric ranges, securely fastening the thermostat sensor bulb. This clip features corrosion-resistant spring coils and precision tips.  

Symptoms of a bad thermostat bulb clip include:  

  • Dangling thermostat bulb
  • Temperatures inside oven might be incorrect because sensor bulb is not mounted correctly.

Causes of failure involve metal fatigue weakening the thermostat bulb clip over years of expansion and contraction during heating, worn surfaces losing grip, or damaged barbs failing to anchor the thermostat bulb.

Replace yours today with this genuine OEM Whirlpool clip. Compatible with Jenn-Air, GE, and select Kenmore appliances, reinforced coils maintain constant tension assuring safety. Reliable glass retention enhances interior illumination for tasks.

Do-It-Yourself Stories from Customers like You Broken clip on oven thermostat   John W. • Arlington Hts , IL • August 05, 2016

Perfect...........Easy to find part (picture), Next day delivery ( not expected) Installed clip ( two minutes) All is well! Thanks much. Read more

More
$45.95
Compare At:
$54.22
You Save:
$8.27

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw (10-16 X 1/2 In), Single
Genuine Whirlpool part
By: Whirlpool
Part Number: WP693304

This is a 10-16 x 1/2 inch appliance screw used to secure panels and components on compatible Whirlpool laundry and kitchen appliances. It restores a secure fit when a fastener is missing or stripped. What it does

  • Fastens trim, panels, brackets or small components to the appliance chassis
  • Replaces a lost or damaged factory screw to stop rattling or loose parts
  • Matches OEM thread and length for proper engagement and holding strength
  • Helps maintain alignment and safe operation of the attached part
What's included One 10-16 x 1/2 inch screw (quantity: 1) Install notes
  • Use the correct screwdriver or nutdriver to avoid stripping the head
  • Tighten until snug—do not overtighten to prevent damage to threads or sheet metal
  • Disconnect power and follow the appliance manufacturer's safety instructions before servicing

More
$5.95
Compare At:
$7.14
You Save:
$1.19

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP486754

Size: 6-32 x 3/8 inch.

More
$5.95
Compare At:
$7.14
You Save:
$1.19

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Oven Igniter Switch (Spark)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP878009

This oven igniter switch controls the spark ignition for a gas oven, allowing the burner to light reliably so the oven can heat. It replaces a worn or failed switch to restore safe ignition operation. What it does:

  • Sends spark signal to the bake/oven burner igniter to initiate ignition
  • Commonly replaces a switch that causes no spark, intermittent ignition, or clicking without lighting
  • Works as part of the oven's ignition system to help ensure consistent burner lighting
  • Matches OEM function and mounting for direct replacement
What's included:
  • One oven igniter switch as pictured
Install notes:
  • Disconnect power and gas supply before starting any repair
  • Basic mechanical skill and common hand tools are typically required;
  • Do not force connectors; ensure proper grounding and secure connections before testing

Do-It-Yourself Stories from Customers like You Sparking & burners   Gregory G. • Endicott , NY • December 29, 2016

Have a good old Caloric stove/oven but the horizontal design left the knobs open to grease and water dripping downward into the control knobs. This fouled up the sparking of the oven and one burner on stove. also the front 2 deteriorated burners were allowing some flames to pass under the stovetop. However, as is often the case with the older models(like my 1991 Audi 100), if you can find the parts they can be fixed with one replaced here and there. APP fulfilled my order with excellent... Read more

More
$51.27
Compare At:
$61.01
You Save:
$9.74

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10068250

 

More
$5.72
Compare At:
$6.29
You Save:
$0.57

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Nut
Genuine Whirlpool part

Nut

By: Whirlpool
Part Number: 98460

 

More
$9.95
Compare At:
$11.84
You Save:
$1.89

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store