Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Tub Corner Baffle is an OEM part for GE dishwashers. This rubber component is placed in the corners of the dishwasher tub to prevent water from leaking out during the wash cycle. It acts as a barrier, directing water back into the tub and ensuring efficient operation. This is the left side. For the right side, use WD8X227.
Causes of a bad part can include prolonged exposure to detergents and hot water, leading to material breakdown, or physical damage from loading and unloading dishes.
Symptoms of a bad Tub Corner Baffle include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
After researching on the APP site, I decided what I thought I would need and purchased a new Gasket, Gasket Insert, Left & Right Corner Baffles from APP. The parts were shipped immediately. However, I’m an 80 yr. old female so I procrastinated for almost 6 weeks before deciding to 'tackle' the repair myself rather than hiring an appliance repair person or "handyman". I went back into the AppliancePartsPros site and reviewed the wonderful videos related to the repair since Matt had made it... Read more
The Tub Corner Baffle is an OEM part for GE dishwashers. It is strategically placed at the corners of the dishwasher tub to prevent water from leaking out during operation. For the left side use WD8X228. Color: Black.
Causes of a bad tub corner baffle can include wear and tear from regular use, improper installation leading to gaps or looseness, and degradation of the material over time due to exposure to detergents and high temperatures.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
The Lower Dishrack Roller Kit is an OEM part for GE dishwashers. This kit includes 8 wheels and 8 axles. It allows it to glide smoothly in and out of the dishwasher. Proper functioning of these rollers is crucial for the easy loading and unloading of dishes, ensuring that the dishrack moves efficiently along its tracks.
You should replace the lower dishrack roller kit if the rollers become worn out or damaged. Common causes of roller issues include wear and tear from frequent use, accumulation of debris, or breakage due to heavy loads or accidental impact.
Symptoms of a bad lower dishrack roller kit include:
I never respond to these kinds of requests but I must respond to this one because of your superior service! The best story here was that I ordered the parts from AppliancePartsPros at 4:15 p.m. one day, and they were on my porch by 2:00 p.m. the next day!! I am very impressed, so please keep up the great work. I'll add that the prices were the best I found too. The dishwasher wheels replacement didn't require tools & took less than 15 minutes. The original design/materials are not very... Read more
The Rack Slide End Cap is an OEM replacement part for GE dishwashers. This small but essential component is designed to secure the end of the rack slide rail, preventing the dish racks from sliding off the track or becoming misaligned.
Symptoms of needing to replace a rack slide end cap include:
Causes of a faulty rack slide end cap can include normal wear and tear over time, exposure to heat or moisture, or physical damage due to impact or mishandling.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.
Replaced the pump drain assembly Read more
The Silverware Basket Assembly is an OEM replacement part for GE dishwashers. It is a specialized basket designed to hold and secure utensils, flatware, and other small items during the dishwashing cycle. It is important to note that if your original basket was a 3-piece design, the manufacturer has updated this part to a more convenient 1-piece design
Symptoms of a need to replace the silverware basket assembly:
Causes of a faulty silverware basket assembly can include general wear and tear, exposure to high temperatures or harsh detergents, and accidental impact or mishandling.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.
Our GE was installed about 8 years ago and was AWESOME for much of its early life. However, progressively its cleaning ability diminished. By replacing all the spray arms (clogged with debris), filters, drain hose, and sump...this dishwasher cleans like it did when it was new! Cost was around $100 (also replaced a wheel and the silverware basket) and labor was relatively simple. And to think...my mother-in-law said, "Wouldn't it just be easier to buy a new one?!?". Read more
The Door Recess Spring is an OEM replacement part for GE side-by-side refrigerators. It sits within the icemaker door frame to control movement and allow smooth closing/opening of the access point.
Causes of a bad icemaker door recess spring include wear and tear of thin metal coils repeatedly compressing over many years of filling cycles. Exposure to humidity intrusions from melting ice accumulates oxidation shortening spring elasticity.
Symptoms of a bad icemaker door recess spring include:
This genuine GE replacement spring is compatible with Hotpoint, RCA and Kenmore models.
My refrigerator is 13 yrs old and began to build up frost in the ice cube shoot and the water tube began to freeze up over night. The flapper door was not closing completely. I simply removed the control panel by pulling up and out on the bottom edge, the edge is only about 1/8 inch thick, so don't reach in to far. You should be able to feel a small division line between the control panel and the refrigerator. No screw driver was needed to expose the 4 mounting screws of the inner dispenser... Read more
The Roller and Stud Assembly - 4 Pack is an OEM part for GE dishwashers. This assembly includes four rollers and studs that are essential for the smooth operation of the dishwasher's lower rack. The rollers ensure that the rack glides in and out effortlessly, providing easy access for loading and unloading dishes.
Causes of a bad roller and stud assembly include regular wear and tear, accumulation of dirt and debris that can hinder movement, and damage from heavy loads or improper loading of dishes.
Symptoms of a bad roller and stud assembly include:
Ordered the clips that we easy to find on line. They can within a few days..and replaced them myself..didn't wait for my husband. Hardest part was getting the end caps off the metal rack to replace the rollers and clips. They fit in there spmehow. I used a screwdriver to get them out. Rest was a piece of cake Lol Read more
The Lower Door Gasket is an OEM part for GE dishwashers. This gasket is for creating a tight seal around the dishwasher door to prevent water from leaking out during cycles.
Symptoms of a bad Lower Door Gasket include:
Causes of a bad door gasket can include regular wear and tear from use, improper door alignment, excessive cleaning chemicals that degrade the material, or thermal damage from high-temperature cycles.
The repair was super simple. Just slide out the old seal and slide in the new. The INTERESTING part was getting access to the seal at the bottom of the door. Just remove the front of the door -- unscrew eight screws around the edge. Try to pull off the door front. Finally locate two hidden screws underneath the two bottom corners. After several tries, find that the screws require a wrench to loosen. I pull off the door front, making only a few scratches, some on my hand, then try to pry up... Read more
The Interlock Switch is an OEM replacement part for GE electric and gas dryers. This safety component monitors the door closure, preventing operation if the door is not securely closed and latched. The switch measures 2 inches long and 1/2 inch wide.
Symptoms of a faulty interlock switch include:
Causes relate to the internal component contacting the door frame over 50,000 open/close cycles potentially exposing wiring to wear. Regular cleaning the external switch area prevents dust or lint buildup skewing performance.
This genuine GE switch is compatible with Hotpoint and RCA dryers as well.
Note: Can be used as a dishwasher door switch on specific models. Check your model number for the most accurate results.
The full story: Dishwasher stopped running mid-cycle. When I first began troubleshooting I tried manually advancing the timer knob, and the machine would run. That led me to believe that the actual timer assembly was bad, so I replaced it. The dishwasher ran fine for a day, and then the same problem came back. This time, however, I also had to push in on the door to get it to run. I looked around online, and someone suggested that the door latch wasn't closing tightly enough. I adjusted the... Read more
The Solenoid Armature and Linkage is an OEM replacement part for GE dishwashers. It is responsible for controlling the dishwasher's draining process by operating the drain valve, which regulates the flow of water out of the dishwasher during the drain cycle.
Symptoms of a bad solenoid armature and linkage include:
Causes of a bad solenoid armature and linkage can include mineral buildup or debris obstructing the valve, electrical malfunctions in the solenoid coil, or mechanical wear and tear of the linkage components.
About a year ago my dishwasher during a cycle was emitting a horrible plastic burning smell. We stopped it mid-cycle, cleaned it out and tried to run a few more cycles after that and realized it wouldn't drain so it sat in my kitchen broken for a year. I finally got so fed up with washing dishes by hand that I took the whole dishwasher apart. Confirmed there were no blockages in any of the hoses etc. when it still didn't work I googled the problem, found this website and found that it must be... Read more
The Lower Rack Assembly is an OEM part for GE dishwashers. It provides the lower-level storage for dishes, pots, pans, and utensils during the wash cycle, allowing water and detergent to reach all items effectively.
Over time, exposure to high temperatures, heavy loads, and abrasive detergents can cause the rack's coating to wear off, leading to rust and reduced functionality.
Symptoms of a bad lower rack assembly include:
Purchased replacement rack with wheels that were better equipped. This rack is way better than the original that was falling apart. The wheels came off and the prongs broke. This replacement part seems to be constructed well. Read more
The Dishwasher Shaft Seal is an OEM part for GE dishwashers. This seal is located around the motor shaft and prevents water from leaking out of the dishwasher tub where the motor shaft enters.Seal for pump drain valve shaft. Instruction sheet included. Push-on nut may have to be cut off, order WR2X7054.
Over time, regular use can cause the seal to deteriorate, or debris and mineral deposits can lead to damage. A compromised shaft seal can result in water leaks, potentially causing damage to your kitchen floor and dishwasher components.
Symptoms of a bad dishwasher shaft seal include:
Removing the bottom panel and watching the internals while the washer was running revealed a small drip from what appeared to be a plastic cam that was attached to a solenoid. The water was dripping from the shaft the cam attached to down into the solenoid. Being a DIY guy I pulled the washer out, turned it upside down and inspected the effected mechanism. It appeared that there was a seal on the shaft that was leaking. The water leaking into the solenoid caused it to rust and stick. A quick... Read more
The Tub Gasket is an OEM part for GE dishwashers. This gasket provides a watertight seal between the dishwasher tub and the door, preventing water from leaking out during the wash and rinse cycles.
Symptoms of a failing Tub Gasket include:
Causes of a bad tub gasket can include wear and tear from regular use, exposure to high temperatures and detergents that degrade the material, or physical damage from improperly loading or unloading the dishwasher.
This OEM GE part is also compatible with some models from Hotpoint, RCA, and Kenmore models.
All parts arrived in one box - I purchased the tub gasket, lower door gasket and lower door seal. My existing parts were visibly pretty worn out, dishwasher is 12 years old (maybe should have just bought anew one?). Tub gasket was pretty easy, it took me a while to make sure it was even all the way around, after attest run and the subsequent drying heat it fits nicely. Lower door seal went as video, all good, my other one was destroyed from the heat cycles. Could not get the lower door seal... Read more
The Push-On Nut is an OEM part for GE appliances. This small component is typically used to secure various fittings and fastenings within appliances, ensuring they are tightly held and do not loosen over time. Its push-on design allows for easy installation, making it a straightforward solution for maintaining the structural integrity of your appliance components.
Symptoms of a failing Push-On Nut include:
Causes of a bad push-on nut can include metal fatigue leading to loss of elasticity, corrosion from exposure to moisture, or general wear from repeated removal and installation.
The Complete GE Pump and Motor Assembly is an OEM replacement part for GE dishwashers. This assembly is integral to the dishwasher’s functionality, as it combines both the pump and motor components that work together to circulate water during the wash and rinse cycles. The pump forces water through the spray arms, while the motor drives this process, ensuring thorough cleaning of the dishes.
Over time, the pump and motor assembly can wear out due to constant use and exposure to water and detergents. Additionally, debris or hard water buildup can clog the pump, causing strain on the motor and leading to failures. Electrical issues or damage from power surges can also impair the assembly's performance.
Symptoms of a bad pump and motor assembly include:
I fixed it by installing a ge pump and motor assembly. it works fine Read more
The Hinge Arm Link is an OEM part for GE dishwashers. This component functions as a connection point between the dishwasher door and the hinge mechanism, allowing the door to open and close smoothly. The hinge arm link ensures that the door can bear the weight of itself, often laden with a mounted dish rack when fully loaded, without straining the hinges or misaligning.
Causes of damage to the hinge arm link often involve regular wear and tear from the constant motion of opening and closing the dishwasher door.
Symptoms of a bad Hinge Arm Link include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
I watched the repair video and ordered the part ( I luckily ordered two links). The video was not exactly for my model dishwasher but I did follow the instruction for removal from the cabinet. Since my model was not shown, I was looking to see how the door spring and the Hinge Arm Link was supposed to be set up. I had the impression that the door spring and link was only on the right side of the dishwasher. I finally figured it out and took pictures of the set-up for the next time the link... Read more