Jkp7g0j3b6 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Appliance Light Bulb

4.9 (373)

By: Whirlpool

Part Number: 8009

Original Whirlpool light bulb, 40 watt.

Symptoms of needing to replace the light bulb include:

Dimming or flickering light
Complete lack of illumination inside the appliance
Visible signs of damage or burnout on the bulb itself

Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.

Do-It-Yourself Stories from Customers like You Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

$17.76

Compare At:: $20.96
You Save:: $3.20

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Bake Element

4.9 (714)

By: Ge

Part Number: WB44X200

The Oven Baking Element is an OEM part for GE electric ranges and wall ovens. This baking element is located at the bottom of the oven cavity and provides heat from below during baking function. Even, consistent heating is vital for optimal cooking performance.

Causes of a bad baking element can include mineral buildup from repeated high temperature use that interferes with heating ability. Element coils breaking or blowing out is also common after several years of use.

Symptoms of a bad baking element include:

Inconsistent or inadequate heating from the bottom of the oven
Cook times longer than normal for many recipes
Error codes indicating issues with the lower heating element
Open or shorted element coils preventing any heating

This OEM GE replacement is also compatible with Hotpoint, RCA, and some Kenmore electric wall oven models.

This part fixes the following symptoms

Oven is too hot
Little to no heat when baking
Oven not heating evenly
Element will not heat

Do-It-Yourself Stories from Customers like You Broiler element burnt out on very old oven Deloris B. • Spokane , WA • November 23, 2015

I cannot not sing the praises of this company & their helpful & fast service. I am going to post the online site address w/my praises on my facebook page for my friends that live on ranches many miles from appliance repair shops & towns. The Oven in our house is for sure over 20 yrs old it was in this home when we bought it, the home is 33 yrs old & the Oven is a Wall Oven, there is not room for a standard Oven in this Kitchen. The Oven itself still looks very nice. About 8 yrs ago or more... Read more

$30.60

Compare At:: $68.17
You Save:: $37.57

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Sensor Asm

4.9 (124)

By: Ge

Part Number: WB21X22134

The Oven Temperature Sensor Assembly is an OEM replacement part for GE electric wall ovens. It is responsible for accurately reading the oven's internal temperature to provide precise temperature control and safe operation. Consistent and precise temperature readings are necessary for repeatable cooking results.

Symptoms of a bad temperature sensor include:

Inability to reach or maintain set cooking temperatures
Fluctuating temperatures causing inconsistent results
Error codes or fault messages related to temperature regulation
Potential safety concerns if temperatures run too high or low

Causes of a faulty sensor can be due to failures over extended usage, exposure to high heat cycles, or impedance changes due to dirt or mineral deposits. Precise temperature readings allow for confident cooking.

This OEM GE replacement sensor is also compatible with Hotpoint, RCA, and some Kenmore electric wall oven models.

This part fixes the following symptoms

Oven is too hot
Won't start
Little to no heat when baking

Do-It-Yourself Stories from Customers like You Oven would not come to full temperature; unreliable heating; heating elements apparently ok. Stewart W. • Silver Spring , MD • May 07, 2022

My mother's GE range was not coming up to full heat (very far from it), and I was hearing a lot of relay-clicking coming from the control board. The heating elements seemed good. I suspected the control board was faulty, but there was a chance that it might be the (*much* less expensive) temperature sensor, so I ordered both from AppliancePartsPros.com (which got the parts to me very fast) so I could try the T-sensor first. After removing the doors and the back panel of the oven, and taking out... Read more

$15.26

Compare At:: $21.22
You Save:: $5.96

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Broil Element

4.9 (177)

By: Ge

Part Number: WB44X173

The Broil Element is an OEM part for GE ovens. It is designed to provide the high heat necessary for broiling food, such as meats and vegetables, allowing for a quick cooking process that seals in flavors and creates a deliciously crispy exterior.

Causes of a bad Broil Element can include failure due to internal coil damage, burnout from excessive use, or electrical issues such as short circuits or loose connections that prevent it from heating.

Symptoms of a bad Broil Element include:

The oven not heating up to the set broil temperature.
Uneven cooking or browning of food.
No visible glow from the element during operation.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when broiling
Oven not heating evenly
Won't start
Element will not heat

Do-It-Yourself Stories from Customers like You Broiler element burnt out on very old oven Deloris B. • Spokane , WA • November 23, 2015

$28.23

Compare At:: $61.01
You Save:: $32.78

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Do you need help?

Get Questions Answered Instantly.

1-877-477-7278 Online

Live Help

Best Seller

Genuine Ge part

Oven Bake Element

4.9 (147)

By: Ge

Part Number: WB44K5013

The Oven Bake Element is an OEM part for GE ovens. This component is located at the bottom of the oven cavity and is responsible for generating the heat needed for baking. By converting electrical energy into heat, the bake element ensures even temperature distribution throughout the oven, allowing for consistent cooking results.

Causes of a malfunctioning Oven Bake Element may involve visible signs of wear or damage, like blistering or holes, a break in the element that hinders proper heating, and burnout or malfunctioning resulting from age or excessive use.

Symptoms of a failing Oven Bake Element include:

The oven not heating to the set temperature
Uneven baking results
No visible glow from the element when the oven is turned on
The oven taking longer than usual to preheat

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when baking
Oven not heating evenly

Do-It-Yourself Stories from Customers like You Lower oven bake heating element was broken in half Richard P. • Colleyville , TX • September 19, 2014

Watched the appliancepartspro video and changed it out. It took about 15 minutes. I'm sure I saved hundreds. Read more

$63.95

Compare At:: $76.10
You Save:: $12.15

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Broil Element

4.9 (89)

By: Ge

Part Number: WB44K5009

The Broil Element is an OEM part for GE ovens. This element is located at the top of the oven and is crucial for the broiling function, providing high heat for cooking dishes such as meats and vegetables directly under the heat source. The broil element glows red hot when in use, creating the necessary temperature to sear food and lock in flavors.

Symptoms of a failing Broil Element include:

The element not heating up when the broil setting is activated
Uneven cooking or lack of browning on food intended to be broiled
Visible damage to the element, such as blistering, bubbling, or breaks in the element coil
No visible glow from the element during operation

Causes of a bad broil element often involve burnout from regular use, electrical issues such as faulty wiring or a malfunctioning thermostat that doesn't cycle the heat correctly.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when broiling
Element will not heat

Do-It-Yourself Stories from Customers like You Broil element burned out Tommie S. • Greensboro , NC • June 12, 2014

Once I received the element within three days, I simply removed the other element by unclipping and unplugging lugs in rear. Placed the new one in clips and connected lugs and all was good! Read more

$66.95

Compare At:: $79.67
You Save:: $12.72

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Screws - 12 Pack

4.9 (75)

By: Ge

Part Number: WB1X500D

These GE screws are a 12-pack of OEM replacement parts responsible for securing and fastening various components and panels in a GE range or oven. These screws are designed with a hexagonal head, which allows for the use of a compatible wrench or socket for tightening. They are commonly used to attach sheet metal panels, brackets, and other parts within the appliance, ensuring that these components remain securely in place during operation.

This part fixes the following symptoms:

Loose or wobbly parts or panels within the appliance's interior or exterior
Panels or components falling out of place, creating gaps or exposing internal parts
Unusual noises or rattling sounds during the appliance's operation

The GE screws can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You The control knob spun freely without engaging to select cycle Polly H. • Glen Allen , VA • November 11, 2014

I pulled off the retaining clip with pliers then removed the old knob and timer dial. I replaced all the parts with the new ones and used pliers to reinstall the clip. The teeth on the new knob engage to select the cycle. https://www.youtube.com/watch?v=cQwLtRcHx9k Read more

$7.65

Compare At:: $9.10
You Save:: $1.45

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Support Bracket

4.9 (33)

By: Ge

Part Number: WB2X9719

The Support Bracket is an OEM part for GE ovens, designed to provide stability and support for the broiling element. This bracket is essential for ensuring the broiling element is securely positioned at the top of the oven, allowing for even heat distribution and optimal cooking performance when broiling foods.

Causes of damage to the support bracket often involve high heat exposure, accidental impacts during cleaning or cooking, or general wear and tear over time.

Symptoms of a bad Support Bracket include:

The broiling element hanging lower than usual or touching the oven cavity, which can affect cooking performance and potentially damage the oven's interior.
Unstable or loose broiling element, leading to uneven cooking or broiling.
Visible signs of wear, damage, or corrosion on the bracket itself, indicating it may no longer provide adequate support.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Lower oven bake heating element was broken in half Richard P. • Colleyville , TX • September 19, 2014

Watched the appliancepartspro video and changed it out. It took about 15 minutes. I'm sure I saved hundreds. Read more

$10.00

Compare At:: $10.43
You Save:: $0.43

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Light Lens

4.9 (42)

By: Ge

Part Number: WB36X192

The Oven Light Lens is an OEM part for GE ovens, designed to protect and cover the oven light bulb. It allows for a clear view of the oven's interior, making it easier to monitor the cooking progress without opening the oven door, thus maintaining a consistent temperature.

Over time, the oven light lens can become discolored or cloudy from exposure to high temperatures, grease, and food splatters, which can diminish its effectiveness. Additionally, accidental bumps or cleaning can lead to cracks or breaks in the lens.

Symptoms of a bad Oven Light Lens include:

Diminished light output, making it hard to see inside the oven
Cracks or damage to the lens itself
Discoloration or cloudiness that cannot be cleaned off
The lens becoming loose or falling off

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Oven would not heat and oven light wouldn't work Garett N. • Lubbock , TX • May 06, 2016

Tested the power to the unit by turning on the cooktop portion and saw that I had power to all of the burners. Turned the selector knob to broil and saw that the top element would heat up. I then turned off the breaker to the unit. I then decided to take out the baking element to do a continuity test. When I touched it, a 1.5 inch section fell out. Since that concluded my continuity test, I assumed I needed a baking element. After receiving the parts the NEXT DAY (amazingly great service... Read more

$10.95

Compare At:: $13.14
You Save:: $2.19

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Broiler Pan Kit

5.0 (46)

By: Ge

Part Number: WB48X10056

The Broiler Pan Kit is an OEM part for GE ranges. It serves as a secure platform for positioning meats, vegetables, and various foods directly beneath the broiler element, ensuring safe and efficient cooking. The pan is about 17 inches wide by 13 inches deep.

Over time, wear and tear can affect broiler pans, causing issues such as flaking or stripping of the non-stick coating and the development of small ridges or holes that permit grease to drip down.

Symptoms of bad broiler pans include:

Grease fires caused by dripping grease contacting the heating element
A burnt or smoky flavor transferring to foods
Difficulty removing baked-on grease and food deposits
Pans that are misshapen or developing small cracks

This OEM GE replacement part is also compatible with select Hotpoint, RCA, and some Kenmore ranges

Do-It-Yourself Stories from Customers like You None Ralph W. • Brentwoo , NY • July 13, 2014

Fast delivery, great service Read more

$26.95

Compare At:: $32.34
You Save:: $5.39

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Probe Thermistor

5.0 (7)

By: Ge

Part Number: WB20T10024

The Probe Thermistor is an OEM replacement part for GE wall ovens and ranges. Located inside the oven cavity, this temperature-sensitive probe precisely monitors interior heat to safeguard against overcooking.

Causes of a faulty thermistor involve exposure to excessive cooking temperatures, moisture infiltration from spills or steam, or basic failure due to old age.

Symptoms of an inadequate probe thermistor include:

Inaccurate temperature readings and baking inconsistencies
Oven temperature exceeding desired setting risking fire

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You I needed anew probe for my convection oven (geprofile) Ronald S. • Charlotte , NC • September 21, 2014

I looked diligently for this probe for many months and to no avail. So desperate to find it , I Goggled and found this provider for the probe. I was amazed at the timing of the receipt of the item. I received an email within hours that it had been shipped the same day and arrived at my home within less than 48 hours! The price was great and the item was easy to locate on the site.. Thank you for your attention and customer service. I will use these folks again! Read more

$52.73

Compare At:: $63.28
You Save:: $10.55

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Element Broil Asm

4.9 (10)

By: Ge

Part Number: WB44T10099

The Element Broil Assembly is an OEM replacement part for GE electric ranges. This assembly holds and secures the upper heating element that provides intense heat for broiling food items directly above the heating coils. Proper functioning of the element broil assembly allows for consistent and efficient broiling performance.

Symptoms of a bad element broil assembly include:

Slow or inefficient broiling even on high heat settings
Flickering or unstable heat from the upper broiler element
Sagging, loose, or damaged assembly housing the element

Causes of failure can be normal wear over time, damage from harsh cleaning chemicals, or issues like bending or warping that prevent secure mounting of the broiler element.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Oven broiler heating element quit working Ben B. • Columbia , TN • March 17, 2020

Replaced broiler element with new one. We had difficulties in locating the correct element for my oven. Read more

$83.95

Compare At:: $99.06
You Save:: $15.11

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Shop With Confidence

Over 15 million customers served!

365-Day Returns

Hassle-free Returns

Fast Delivery

1.7 Days on Average!

Free Tech Support

On all purchased parts!

Best Seller

Genuine Ge part

Receptacle Push-In

5.0 (32)

By: Ge

Part Number: WB08T10026

The Receptacle Push-In is an OEM replacement part for GE ranges. This component securely holds the electrical receptacle/plug in place on the back of the range. Proper functioning of the receptacle push-in allows for a stable electrical connection and safe cord positioning.

Causes of a bad receptacle push-in include normal wear over time, bending/stress on the receptacle area, or damage affecting its securing ability.

Symptoms of a bad receptacle push-in are:

Loose or wobbly electrical plug connection
Exposed wiring or fragile cord positioning
Tripped breakers or recurring electrical issues

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Wire connecting from strove to light fixture sparked out Joanne C. • Hudson , FL • October 30, 2015

Called Appliance Parts - service agent was extremely helpful. Tried to find an assembled piece was unable to do so. Send me the individual parts which were very easy to assemble. Was able to replace entire light assembly, reconnect wire with new terminal end. Light works find just now. Would definitely call again if I needed assistance. Read more

$7.45

Compare At:: $8.36
You Save:: $0.91

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Rack

4.6 (7)

By: Ge

Part Number: WB48T10093

The Rack is an OEM part for GE ranges, designed to provide a sturdy and reliable surface for baking and roasting your favorite dishes. This high-quality metal rack fits perfectly inside GE ovens, allowing for optimal air circulation around the food for even cooking.

Causes of a bad Oven Rack can range from excessive weight placed on the rack, improper cleaning methods leading to rust, or general wear and tear over time.

Symptoms of a bad Oven Rack include:

Difficulty sliding the rack in and out, which can be caused by warping or damage
Rust or corrosion, which can contaminate food and affect the overall cleanliness of the oven
Unstable positioning, leading to uneven cooking or the risk of dishes tipping over

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You No problem I just wanted to oven racks Virginia B. • Amherst , NY • March 20, 2023

Put the new oven racks in the oven when they were received. Read more

$80.66

Compare At:: $95.99
You Save:: $15.33

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Hi Limit Switch

4.8 (4)

By: Ge

Part Number: WB24T10081

The Hi-Limit Switch is an OEM replacement part for GE ranges. It is a safety component responsible for monitoring internal oven temperatures. The hi-limit switch helps prevent overheating by detecting when excessive heat has built up inside the oven cavity. It will automatically cut power to the bake/broil elements if temperatures rise too high.

Causes of a bad hi limit switch can include normal failure after years of exposure to heat, or issues with the electronic components or calibration.

Symptoms of a bad hi-limit switch include:

The oven failing to heat up or bake/broil food properly
Frequent thermal cut outs requiring the oven to be unplugged
Delays in the oven reaching the set temperature
Oven will not turn on

This is a genuine OEM part that works for some models of GE, and Hotpoint models.

Do-It-Yourself Stories from Customers like You Our ge micro/oven combo unit oven would not maintain heat John M. • Tonkawa , OK • December 19, 2014

Ohmed the oven heat elements and oven sensor, they checked out fine. No broken or bad connections. Figured it had to be high limit switch opening or control panel. With Christmas meal around corner I ordered both. Oven working fine and my wife is happy. Read more

$42.62

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Door Gasket

4.7 (6)

By: Ge

Part Number: WB2X3138

The Oven Door Gasket is an OEM replacement part for GE ranges and wall ovens. It provides a secure seal around the oven door to contain heat within the cooking cavity. The gasket is essential for efficient operation as it helps maintain optimal cooking temperatures.

Causes of a bad door gasket can include heat damage over time, warping from repeated door openings and closings, or accidental tears and ruptures.

Symptoms of a bad oven door gasket include:

Excessive heat loss around the door area
Inconsistent or inefficient cooking performance
The door not sealing properly, allowing heat to escape
Rust or corrosion on interior door parts

This OEM GE part is compatible with GE, Hotpoint, Monogram, and certain Kenmore wall oven models.

Do-It-Yourself Stories from Customers like You Glass broke in oven door and seal around the inside needed replacing Fred W. • Porter Ranch , CA • January 26, 2016

Glass was very difficult to replace, but I was able to do it after some trial and error. Replacing the seal was very easy. Read more

$140.95

Compare At:: $169.14
You Save:: $28.19

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Jkp7g0j3b6 Parts

Appliance Light Bulb

Oven Bake Element

Sensor Asm

Oven Broil Element

Oven Bake Element

Oven Broil Element

Screws - 12 Pack

Support Bracket

Oven Light Lens

Broiler Pan Kit

Probe Thermistor

Element Broil Asm

Receptacle Push-In

Rack

Hi Limit Switch

Oven Door Gasket