Line Hook Line Mover On-Off Switch Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3406107
The Dryer Door Switch is an OEM replacement part for Whirlpool dryers. It is a crucial safety component that monitors the opening and closing of the dryer door, preventing the dryer from operating when the door is open.
Symptoms of a faulty Dryer Door Switch include:
- The dryer failing to start or operate with the door closed
- The dryer continuing to run or heat even when the door is open
- Error codes or warning lights related to the door switch sensor
Causes of a bad door switch can include normal wear and tear over time, physical damage from mishandling or impact, or electrical malfunctions.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.
This part fixes the following symptoms
-
Doesn't shut off
-
Won't start
-
Will not tumble
See more...
Do-It-Yourself Stories from Customers like You
Ignitor coil was not turning on Harrison N. • El Cajon , CA • March 14, 2021
I realized my load of laundry was still wet after a normal drying cycle. My first action was to turn the dryer on (2010 gas Maytag centennial) and open the front port to look at the ignitor coil. It never turned orange so I knew there must be a problem with the primary circuit. I shut off the dryer, disconnected the power, pulled it away from the wall, shutoff the gas, and removed the back panel. I then disconnected the wires for the thermal fuse and checked its resistance with a multimeter....
Read more
More
$26.95
- Compare At:
-
$31.80
- You Save:
-
$4.85
Genuine Frigidaire part
By: Frigidaire
Part Number: 316436001
The Large Surface Element Switch is an OEM replacement part for Frigidaire ranges and cooktops. It is a component that controls the power and temperature settings for one of the larger surface heating elements on the appliance.
Symptoms of a faulty Large Surface Element Switch include:
- Difficulty in adjusting or maintaining consistent heat settings
- The surface element not heating up or cycling on and off unexpectedly
- Flickering or erratic behavior of the surface element
- Burning smell or visible signs of overheating
Causes of a bad large surface element switch can include normal wear and tear, exposure to excessive heat or moisture, or electrical malfunctions.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore range and cooktop models.
This part fixes the following symptoms
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
The front left element (8 inch) would stay hot on lower control settings. Michael S. • West Seneca , NY • September 13, 2022
After an internet search, the likely problem was a faulty "Element Switch.." I actually unplugged the stove and removed the switch (I did NOT disconnect the wires). I obtained the part number on the switch, disassembled it, observed that the contacts were highly degraded, reassembled the switch and reinstalled it back into the stove. This all provided confidence the SWITCH was faulty.
One switch on the AppliancePartsPros.com website (AP2591804) looked exactly like the switch in the stove...
Read more
More
$34.57
- Compare At:
-
$41.14
- You Save:
-
$6.57
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10662129
The Run Capacitor is an OEM part for Whirlpool appliances, designed to provide the necessary electrical charge to start and run the compressor motor. This part attaches to the compressor to aids in maintaining a consistent motor speed and ensuring smooth operation. The run capacitor plays a crucial role in the appliance's electrical system, storing and releasing energy as needed to power the motor.
Causes of a bad Run Capacitor include electrical surges, wear and tear over time, or overheating, which can lead to a failure in providing the necessary start-up energy or maintaining motor speed.
Symptoms of a bad Run Capacitor include:
- The appliance does not start.
- The motor shuts off shortly after starting.
- The appliance is humming but not running.
- Increased energy consumption.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Too warm
-
Clicking sound
-
Won't start
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
Both the freezer and refrigerator stopped cooling Raymond O. • Kerrville , TX • April 11, 2015
I have a Kitchen Aid side by side refrigerator/freezer which is 8 years old. One day it just stopped cooling. At first I was just going to junk it and purchase a new one. However, I took off the lower back cover and noticed the compressor was not running. I knew from experience that these compressors need a starter capacitor and relay and it is not uncommon for these parts to fail. I looked on the Internet for a video which showed how to remove the parts. I also found a video which showed how...
Read more
More
$42.95
- Compare At:
-
$50.68
- You Save:
-
$7.73
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3149400
The Surface Element Switch is an OEM replacement part for Whirlpool ranges and ovens. This component serves as the control mechanism for the 8-inch surface heating element, allowing you to precisely regulate the temperature or turn the burner on and off.
Symptoms of a faulty surface element switch may include:
- The heating element not turning on or off properly
- Issues with adjusting or maintaining the desired heat level
- Flickering or erratic behavior of the burner
Causes of needing to replace the surface element switch can include normal wear and tear over time, electrical malfunctions, or damage from exposure to high heat or spills.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore range and oven models.
For small element switch use- 3149404
This part fixes the following symptoms
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
The burner on my electric stove was "running wild" (not controlling temperature correctly) James S. • South Abington Township , PA • June 22, 2014
The fix was to replace the infinite control switch on my Whirlpool range. A simple task.
Read more
More
$53.95
- Compare At:
-
$63.66
- You Save:
-
$9.71
Genuine Ge part
By: Ge
Part Number: WH08X37938
The Lid Lock Service Kit is an OEM part for GE washing machines. This kit includes the components necessary to ensure that the washer lid remains securely locked during operation, preventing the lid from being opened when the washer is in use. This safety feature is crucial for top-load washers, ensuring safe and efficient operation by preventing access to the washer drum during cycles.
The kit includes:
- Lid Lock & Harness Assembly
- White Bezel
- Gray Bezel
- White Strike
- Gray Strike
Common causes of a malfunctioning lid lock include wear over time, damage to the lock mechanism, or electrical issues that prevent the lock from engaging or disengaging properly. Exposure to moisture and constant use can also affect the performance of the lid lock system.
Symptoms of a bad lid lock include:
- The washer not starting or advancing in the cycle
- Error codes related to the lid lock
- The lid not locking or unlocking as expected
- The washer stopping mid-cycle
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Would not start wash cycle after water fill Benito G. • Humble , TX • November 15, 2019
Noticed that lid lock light was not on, googled problem, ordered parts, working on 3rd day.
Read more
More
$77.95
- Compare At:
-
$92.76
- You Save:
-
$14.81
Genuine Ge part
By: Ge
Part Number: WB24X25013
The Switch Infinite Control is an OEM part for GE ranges. It acts as a critical regulator for the temperature settings on electric dual-element burners, allowing users to adjust the heat level accurately. This component ensures that the electric burners heat up to the desired temperature and maintain it consistently for optimal cooking results.
Symptoms of a bad Switch Infinite Control include:
- Burners not heating to the set temperature
- Inability to adjust the heating level of burners
- Burners heating unevenly or excessively
Causes of a bad switch can include internal component failure due to overheating, wear and tear from frequent use, or electrical faults within the switch mechanism.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dual electric burner. We could not control temperature, suspected the burner switch was bad. Gary L. • St Louis , MI • February 23, 2021
I got online and found AppliancePartsPros.com. I found others had the same problem, and
had replaced the switch, with my model number your rep got me the exact switch
and a video on how to change it. It took approx 15-20 min . was very happy with the
service, will use again in future if needed.
Gary
Read more
More
$32.95
- Compare At:
-
$38.88
- You Save:
-
$5.93
Genuine Whirlpool part
By: Whirlpool
Part Number: 279570
The Door Latch Kit is an OEM replacement part for Whirlpool washers. This component is responsible for securely locking the washer door during the wash cycle, preventing it from opening unexpectedly and ensuring a safe and efficient operation.
Symptoms of needing to replace the door latch kit include:
- Difficulty in closing or latching the washer door
- Door opening unexpectedly during the wash cycle
- Leaks or water seeping due to an improper door seal
- Excessive wear or damage to the latch components
Causes of a faulty door latch kit can include normal wear and tear over time, physical damage due to impact or mishandling, or issues with the door alignment or strike plate.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.
This part fixes the following symptoms
-
Door won't close
-
Shuts off too soon
-
Doesn't shut off
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Dryer door latch worn out Kathy M. • San Diego , CA • February 22, 2015
When I looked up the part number there was a handy video that popped up. I watched the video and thought "how easy!" so, I ordered that part and waited. The next day, I thought I better start to take the door off of my dryer (because that's what the video instructed, and I wanted a head start) so as I was going into the garage to get my tools, my son came in with a small package. It was the part. That came, to quote another customer, "Crazy Fast!" All the way from Kentucky to California! ...
Read more
More
$6.95
- Compare At:
-
$13.85
- You Save:
-
$6.90
Genuine Whirlpool part
By: Whirlpool
Part Number: W11307244
The lid lock is an OEM replacement part for Whirlpool washers. It is designed to keep the door securely closed during operation.
Symptoms of a faulty lid lock:
- Washer will not start
- Washer stopping randomly during operation
- Lid will not lock
By replacing the latch, you can restore door closure and prevent interruptions in your washer's operation. Improve your washer's safety and efficiency with this durable Lid Lock Assembly.
This latch can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Please note: The part might arrive in the locked position. Install the lid lock and power up your washing machine to reset the lock to the open position.
Do-It-Yourself Stories from Customers like You
The washer would not go into spin mode only partial wash and drain Karen T. • Dearborn Heights , MI • August 11, 2017
The part is so new no video so I went onto a similar part and watched video that got me about 80%. Then, called and customer service sent me a service Manual but this still was not specific so I broke the old to get it out and in the process figured out how to do it correctly. So I installed the last bit of it which was the bezel through the machine top by myself correctly. So you take the old one out by pushing out to the right from the bottom side using a screw driver for leverage. It will...
Read more
More
$97.50
- Compare At:
-
$115.05
- You Save:
-
$17.55
Genuine Whirlpool part
By: Whirlpool
Part Number: W10404050
The Lid Latch Assembly is an OEM part for Whirlpool washing machines. It ensures that the washer lid is securely locked during operation, preventing it from being opened mid-cycle, which could cause water spills and interrupt the washing process. This component plays a vital role in the safety and functionality of the washing machine by ensuring that the lid remains closed during washing and spinning cycles.
Causes of a bad lid latch assembly can include regular wear and tear, electrical failures, or physical damage from forcefully opening or closing the lid. When the lid latch assembly is faulty, it can affect the washer's ability to start or complete a cycle properly.
Symptoms of a bad Lid Latch Assembly include:
- The washer not starting or stopping mid-cycle
- Error codes related to lid lock issues
- The lid not locking or unlocking properly
- The washer pausing unexpectedly during operation
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Lid or door won't close
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
My Maytag bravos mct (Maytag commercial technology) model # mvwx500bw0 washer was not agitating properly and was not spinning at all Mark P. • Mundelein , IL • October 14, 2020
Not wanting to spend hundreds of dollars on an appliance technician's service call, I searched online to troubleshoot the problems with my particular Maytag Washer Model Number MVWX500BW0. I stumbled across AppliancePartsPros.com and investigated there the most likely causes for my Maytag Washer's not agitating properly and not spinning at all. In order to acquire some additional information, I telephoned AppliancePartsPros.com and spoke with an extremely professional, knowledgeable and helpful...
Read more
More
$48.95
- Compare At:
-
$57.76
- You Save:
-
$8.81
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8318084
The Lid Switch is an OEM part for Whirlpool washing machines that is responsible for detecting whether the washing machine lid is closed before allowing the machine to start or continue a cycle. By preventing the washer from operating with an open lid, this switch helps to avoid potential spills or accidents, making it an essential safety feature. The lid switch is activated by the closing of the machine's lid, engaging the washing cycle only when secure closure is detected.
Symptoms of a failing Lid Switch include:
- The washing machine not starting or completing a cycle
- The washer not spinning or draining
- The appliance operating only when the lid is pressed down manually
Causes of a bad Lid Switch can range from mechanical wear and tear to accidental damage, such as slamming the lid too hard or frequently, which can misalign or damage the switch mechanism. Additionally, corrosion caused by moisture or detergent residue can also impair the switch's function.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Won't start
-
Timer will not advance
-
Will not drain
See more...
Do-It-Yourself Stories from Customers like You
Our washing machine filled then began washing the wife opened the lid to add one more item and it would no longer wash or spin Chris J. • Lakeland , FL • January 02, 2018
First I checked the circuit breakers and power to the outlet, then next wanted to check the lid switch, but it wasn't where I had found it on older models. I could hear it clicking on and off as I raised and lowered the lid, but it wasn't visible. I drained the tub through a siphon hose to lighten the machine, so I could slide it away from the wall to better see. Couldn't see the switch anywhere and decided it must be hiding in the raised console, but was unsure of how to attack it without...
Read more
More
$34.54
- Compare At:
-
$40.76
- You Save:
-
$6.22
Genuine Ge part
By: Ge
Part Number: WB24T10025
The Infinite Switch (8") is an OEM replacement part for GE stovetops. It is responsible for controlling the heat output of the burner. The switch allows you to adjust the heat level by turning the knob, regulating the amount of power supplied to the burner. A bad infinite switch can be caused by regular wear and tear, electrical issues, or overheating. It can also become damaged if exposed to moisture.
Symptoms of a bad infinite switch include:
- The burner not heating up
- The burner staying on at the highest heat setting
- The burner not turning off or not responding
- Visible signs of damage
Causes of a bad infinite switch can include normal wear and tear over time, exposure to excessive heat or moisture, or electrical malfunctions.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
The heating element where boiling hot at any seting of the knob Christopher H. • Lawrence , KS • August 17, 2014
I replace the Infinite Switch and that seems to be the trick for keeping the temperture under control.
Read more
More
$34.49
- Compare At:
-
$41.39
- You Save:
-
$6.90
Genuine Ge part
By: Ge
Part Number: WE4M416
The Dryer Push-to-Start Switch is an OEM replacement part for GE dryers. This component is responsible for initiating the drying cycle when pressed, serving as the primary control for starting the dryer's operation.
Symptoms of needing to replace the push-to-start switch include:
- The dryer failing to start or begin the cycle when the switch is pressed
- Intermittent or inconsistent starting issues
- Visible damage or deterioration of the switch itself
Causes of a faulty push-to-start switch can include mechanical wear and tear over time, electrical malfunctions, or physical damage due to impact or mishandling.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dryer models.
Do-It-Yourself Stories from Customers like You
Push start switch on ge dryer Michael S. • Carlsbad , CA • February 26, 2017
I was trying to troubleshot a problem I had with my GE dryer not starting. I went to AppliancePartsPros.com because they have excellent DYI videos on how to make repairs. I determined that the problem was in the push start switch. I ordered the switch online and it took 3 days to arrive. It took 5 minutes to replace the switch and the dryer works perfectly.
Read more
More
$23.32
- Compare At:
-
$27.75
- You Save:
-
$4.43
Genuine Ge part
By: Ge
Part Number: WE4M519
The Dryer Rotary Start Switch is an OEM replacement part for GE electric dryers. This switch functions as the manual interface for selecting drying cycles and initiating operation. Reliable start switch function is key for convenient control.
Symptoms of a faulty switch include:
- Difficulty turning or clicking through cycle options
- Dryer failing to start even when a cycle is selected
- Dryer starting unintentionally or without input
- Potential safety concerns if switch malfunctions
Causes of a bad start switch can be normal wear and tear over heavy usage periods. Worn internal components prevent dependable cycling.
This OEM GE replacement is compatible with Hotpoint, RCA and some Kenmore models.
This part fixes the following symptoms
-
Doesn't shut off
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
It wouldn't start i needed a rotary start switch Tange M. • Florissant , MO • June 20, 2014
I watch the video on YouTube. And it went step by step on how to take it off and on
Read more
More
$13.95
- Compare At:
-
$18.72
- You Save:
-
$4.77
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10119326
The Speed Control Plate is an OEM part for Whirlpool stand mixers. This part regulates the speed at which the mixer operates, ensuring that it can accurately adjust to the desired setting for a wide range of mixing tasks.
Over time, the speed control plate can wear out or become damaged due to regular use, leading to issues such as the mixer not maintaining the set speed, operating too fast or too slow, or not adjusting speeds at all.
Symptoms of a bad Speed Control Plate include:
- The mixer fails to change speeds or adjust accurately
- The appliance operates at an incorrect speed regardless of the setting
- The mixer only works at one speed or does not work at all
- Unpredictable speed changes during operation
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
My kitchenaid k5 ss had only one speed fast! Alice F. • El Dorado , KS • December 13, 2014
I read a few of your reviews and found that a, "Phase Control Board" may be the problem. It was! Talk about easy to install... It was super easy! I decided to order the, "Speed Control Plate" also as a precaution (Shipping was one price - and it arrived the very next day, Wow! I didn't expect that.) With my screwdriver and good lighting. I fixed it myself! My husband is still in shock. I used forceps to install the, "Speed Control Plate," because I needed something to hold the tension wire - at...
Read more
More
$16.75
- Compare At:
-
$20.10
- You Save:
-
$3.35
Genuine Ge part
By: Ge
Part Number: WD21X10519
The Flood Switch Assembly is an OEM part for GE dishwashers that is responsible for detecting water levels in the dishwasher's base, preventing potential flooding by shutting off the water intake if an overflow is detected. This helps in avoiding water damage to your home and ensuring the dishwasher operates normally.
Symptoms of a bad Flood Switch Assembly include:
- The dishwasher not filling with water
- Water not draining properly
- The dishwasher stops during a cycle
Causes of a bad flood switch assembly can vary from debris accumulation affecting the float's movement to electrical issues within the switch mechanism. Over time, wear and tear on the float or switch can lead to failures.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
The dishwasher would not fill with water Jeffrey J. • Ramsey , MN • December 02, 2014
Removed the lower rack, removed the lower wash arm, removed the lower coarse filter, removed fine filter ( still no tools require to this point). Removed two 1/4" head screws with nut driver to then remove float switch, unplugged float switch, plugged in new switch, reinstalled filter, etc. This is a 5 minut job!
Read more
More
$41.95
- Compare At:
-
$49.92
- You Save:
-
$7.97
Genuine Lg part
By: Lg
Part Number: EBF49827801
The Washer Door Lock Switch is an OEM part for LG washing machines. This critical safety feature locks the washer door during operation to prevent it from being opened, which ensures safety and proper functioning. The door lock switch also communicates with the washer's control system to indicate that the door is securely closed and the machine can begin its cycle.
Symptoms of a bad Washer Door Lock Switch include:
- The washing machine refusing to start, despite the door appearing to be closed.
- The door failing to lock properly, or the lock releasing prematurely during a cycle.
- Error messages on the washer's display related to door closure issues.
Causes of a bad door lock switch can include mechanical failures such as worn or damaged locking mechanisms, electrical issues like faulty wiring or failed solenoids, or alignment problems that prevent the door from engaging the switch properly.
This OEM LG part is also compatible with Sears/Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Lid or door won't close
-
Door latch failure
-
Will not agitate
See more...
Do-It-Yourself Stories from Customers like You
E0 code replaced drain pump and circulating motor the door switch assembly was separate issue. Ann M. • Coral Springs , FL • May 09, 2020
Superfast parts delivery. Got packages by the second day. Videos were extremely helpful and well done; we couldn't have done without them although we came across slight differences in our machine and found workarounds. Our machine did not drain the water so I drained the water manually via drain tube at bottom of the machine and checked the filter for blockage. All clear so I read articles on the internet and watched videos and took a chance on replacing the drain pump and circulating motor...
Read more
More
$67.95
- Compare At:
-
$80.18
- You Save:
-
$12.23