Gtw680bsjows Parts

The Lid Lock Service Kit is an OEM part for GE washing machines. This kit includes the components necessary to ensure that the washer lid remains securely locked during operation, preventing the lid from being opened when the washer is in use. This safety feature is crucial for top-load washers, ensuring safe and efficient operation by preventing access to the washer drum during cycles.

The kit includes:

• Lid Lock & Harness Assembly
• White Bezel
• Gray Bezel
• White Strike
• Gray Strike

Common causes of a malfunctioning lid lock include wear over time, damage to the lock mechanism, or electrical issues that prevent the lock from engaging or disengaging properly. Exposure to moisture and constant use can also affect the performance of the lid lock system.

Symptoms of a bad lid lock include:

• The washer not starting or advancing in the cycle
• Error codes related to the lid lock
• The lid not locking or unlocking as expected
• The washer stopping mid-cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Water Inlet Valve is an OEM part for GE washing machines. It is responsible for controlling the entry of hot and cold water into the washing machine. This valve opens and closes at the appropriate times during the wash cycle to allow water to enter based on the selected temperature and wash settings.

Causes of a bad water inlet valve include mineral deposits from hard water, which can block the valve, and wear and tear from regular use, which can cause the valve to fail mechanically or electronically. Additionally, if the screens that filter the water before it enters the valve become clogged, water flow can be restricted, affecting the washing machine’s performance.

Symptoms of a malfunctioning water inlet valve include:

• The machine not filling with water.
• Water entering the machine slowly.
• Water leaking around the valve area.
• A noisy valve during operation.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drain Pump is an OEM part for GE washing machines. It's engineered to remove the used water from the washer at the end of each cycle, ensuring the machine is properly emptied and ready for the next load. This component is responsible for the circulation and expulsion of water, playing a vital role in the washing machine's ability to clean clothes thoroughly.

Causes of a bad Drain Pump can include obstructions within the pump itself, such as small garments or debris that can block water flow, or mechanical failures like a burnt-out motor or damaged impeller blades. 

Symptoms of a bad Drain Pump include:

• Water remaining in the drum after the wash cycle has completed.
• The washing machine failing to start due to sensing water from a previous cycle.
• Unusual noises coming from the pump area

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Washer Shift Actuator is an OEM part for GE washing machines. This component is responsible for transitioning the washer between agitating and spinning modes. By engaging and disengaging the transmission or motor, the mode shifter allows the washer to shift from the wash cycle's agitation motion to the high-speed spin necessary to extract water from the laundry. 

Causes for replacement often stem from wear and tear due to regular use, mechanical failures within the component, or electrical issues that prevent proper operation.  

Symptoms of a bad Washer Shift Actuator include:

• The washer fails to switch between agitating and spinning modes.
• Unusual noises or grinding sounds during the wash cycle, indicating mechanical struggles.
• The laundry is still soaking wet after the cycle ends, suggesting the spin cycle did not engage properly.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Suspension Rod is an OEM part for GE washing machines. This component is crucial for stabilizing the washing machine drum during spin cycles, minimizing vibrations and ensuring smooth operation. The suspension rod measures approximately 25 inches.

You should replace the suspension rod if it becomes worn out or damaged. Common causes of a bad suspension rod include regular wear and tear, overloading the washing machine, or exposure to moisture and corrosive substances. When the suspension rod is compromised, it can affect the machine's balance and performance.

Symptoms of a bad suspension rod include:

• Excessive shaking or vibrating during the spin cycle
• The washing machine being off-balance or moving during operation
• Unusual banging or thumping noises
• Leaks due to increased stress on other components

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Suspension Rod is an OEM part for GE washing machines. This component is crucial for stabilizing the washing machine drum during spin cycles, minimizing vibrations and ensuring smooth operation. The suspension rod measures approximately 25 inches.

You should replace the suspension rod if it becomes worn out or damaged. Common causes of a bad suspension rod include regular wear and tear, overloading the washing machine, or exposure to moisture and corrosive substances. When the suspension rod is compromised, it can affect the machine's balance and performance.

Symptoms of a bad suspension rod include:

• Excessive shaking or vibrating during the spin cycle
• The washing machine being off-balance or moving during operation
• Unusual banging or thumping noises
• Leaks due to increased stress on other components

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drive Belt is an OEM part for GE washing machines. It connects the motor to the drum, enabling the drum to spin during the wash and spin cycles. This belt is crucial for the proper functioning of the washing machine, ensuring that clothes are thoroughly cleaned and water is effectively extracted.

Over time, the drive belt can wear out or break due to regular use, overloading, or improper tension. These factors can lead to a loss of connection between the motor and the drum, affecting the washer's performance.

Symptoms of a bad drive belt include:

• The drum not spinning or agitating
• Unusual noises such as squealing or thumping during operation
• The washer failing to complete cycles or properly clean clothes
• A burning smell coming from the washer

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Clutch is an OEM part for GE washing machines. This component is essential for engaging the washer’s transmission to facilitate the proper spinning and agitating of the drum during wash cycles.

Over time, the clutch can wear out or become damaged due to frequent use, heavy loads, or mechanical stress. Replacing a faulty clutch is crucial for maintaining the washer’s performance and efficiency.

Symptoms of a bad clutch include:

• The washer failing to spin or agitate
• Unusual noises during the wash cycle, such as grinding or whining
• Clothes remaining wet after the spin cycle
• The drum not rotating smoothly or at all

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Speed Sensor is an OEM part for GE washing machines. This sensor monitors the rotational speed of the drum and communicates with the control board to ensure the correct spin speeds during the wash and spin cycles. It helps maintain optimal performance and balance, contributing to efficient washing and energy usage.

Over time, the speed sensor can become faulty due to wear and tear, electrical issues, or damage from vibrations. If the sensor fails, the washing machine may not operate correctly, leading to various performance issues.

Symptoms of a bad speed sensor include:

• Washing machine not spinning or agitating
• Unbalanced loads and excessive vibrations
• Error codes related to spin or motor functions
• Irregular or erratic cycle times

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Clutch Spring is an OEM part for GE washing machines. The spring allows the clutch to engage and disengage with the spin mechanism, facilitating the transition between the wash and spin cycles. 

Over time, the Clutch Spring can wear out or become damaged, affecting the washer's ability to switch between cycles smoothly. 

Symptoms of a bad Clutch Spring include:

• The washing machine not spinning or spinning inadequately
• Clothes remaining wetter than usual after the spin cycle
• The washer making unusual noises during the spin cycle
• The machine struggling to transition between washing and spinning phases

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Main User Interface Control Board is an OEM part for GE washing machines. It is responsible for managing the various functions and cycles of the washer, allowing users to select and control settings via the interface.

Causes of a bad control board can include electrical surges, exposure to moisture, or general wear and tear over time. These factors can lead to malfunctions in the electronic components or connections within the board.

Symptoms of a bad Main User Interface Control Board include:

• The washer not responding to control inputs
• Error codes displayed on the interface
• Inconsistent or failed wash cycles
• Unresponsive or malfunctioning buttons or touchscreen

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Transmission Pulley and Nut is an OEM part for GE washing machines, designed to play a crucial role in the operation of the appliance. This component is directly involved in the movement and control of the washer's drum, translating the motor's power into the spinning and agitation needed for the washing process. The pulley system ensures that the machine operates smoothly, providing the necessary tension and motion to the belt that drives the drum.

Causes of these issues can range from natural wear and tear over time to improper loading of the machine, which can place undue stress on the mechanical components. Regular maintenance, including checking the integrity and alignment of the pulley system, can help prevent these problems.

Symptoms of a faulty Transmission Pulley and Nut include:

• The washing machine failing to spin or agitate properly
• Unusual noises during the spin cycle, indicating a misalignment or wear in the pulley system
• The washer drum moving more slowly or erratically
• Visible wear or damage to the pulley or nut

This OEM GE  part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Washing Machine Screw is an OEM replacement part for GE washing machines. This screw is used to secure various components within the washing machine, such as the drum, control panel, or housing. While it may seem like a small part, the screw plays an important role in maintaining the structural integrity of the machine.

Causes for a bad or missing screw can include corrosion, loosening due to vibrations during wash cycles, or it may simply be missing due to repairs or disassembly.

Symptoms of a bad or missing Washing Machine Screw include:

• Unusual noises coming from the machine
• Components appearing loose or misaligned
• Increased vibrations during operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Impeller/Auger Base is an OEM part for GE washing machines. It is responsible for agitating the laundry within the wash tub, ensuring thorough cleaning by rotating and moving the clothes through the water and detergent.

Causes of a bad impeller/auger base can include general wear and tear from regular use, damage from overloading the washer, or debris getting lodged in the mechanism.

Symptoms of a bad impeller/auger base include:

• Poor cleaning performance
• Unusual noises during the wash cycle
• Washer not agitating properly
• Clothes remaining tangled or not evenly cleaned

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Hub nut is an OEM part for GE washing machines, designed to securely fasten the tub assembly to the drive system of the washer. This component is crucial for the stability and operation of the washing machine's drum, ensuring that it remains properly aligned and attached during the vigorous motion of the wash cycles.

Per the manufacturer due to the high torgue on the hub nut an impact wrench should be used to remove and replace the hub nut. It also rquires a 90 ft lb torque limiting extension WX05X10028 and a 1 5/16th impact socket WX05X10022. You can order these through the links or use ones you already have. WARNING: The 90 ft lb torque limiting extension must be used when removing or installing the hub nut to prevent damage to the hub nut and transmission due to over torquing with the impact wrench. 

Causes of these issues can range from natural wear and tear over time to improper installation or overloading of the washer, which can exert undue stress on the Nut Hub and other related components. Ensuring that the Nut Hub is in good condition and properly tightened is essential for the longevity and proper function of your GE washing machine.

Symptoms of a faulty Hub nut include:

• Unusual noises during the spin cycle, indicating that the drum may be loose or off-balance
• The washing machine's drum exhibiting excessive movement or vibration beyond normal levels
• Water leaks from the area surrounding the drum

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lid Lock Wiring Harness is an OEM part for GE washing machines. It connects the lid lock mechanism to the washing machine’s control board, ensuring proper communication and functionality. This wiring harness is crucial for the safe operation of the washer, as it ensures the lid remains locked during certain cycles to prevent accidental openings and maintain safety.

You should replace the lid lock wiring harness if it becomes faulty. Causes of a bad wiring harness can include regular wear and tear, electrical faults, or damage from impacts or pinching. A damaged wiring harness can lead to communication errors between the lid lock and control board, resulting in improper functioning of the lid lock mechanism.

Symptoms of a bad lid lock wiring harness include:

• The washing machine not starting or stopping mid-cycle
• The lid not locking or unlocking properly
• Error codes related to the lid lock mechanism
• The washer not responding to control inputs

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.