Rb626c1ww Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Ge part

Oven Bake Element

4.9 (926)

By: Ge

Part Number: WB44X5082

The Oven Bake Element is an OEM replacement part for GE ovens. It is a critical component responsible for generating the heat necessary for baking and cooking food in the oven cavity. Measuring 18 ¼ inches wide and 14 ½ inches deep to the mounting flange. It has an element extension of approximately 2 1/4 inches past the bracket to the terminals. This element is rated at 220 volts and 2300 watts.

Causes of needing to replace the bake element can include normal wear over time, electrical malfunctions, or physical damage from impact or excessive temperature fluctuations.

Symptoms of a faulty oven bake element include:

Uneven baking or hot/cold spots within the oven
The oven not heating up to the desired temperature
Visible signs of damage or burnout on the bake element itself
Unusual smells or burning odors coming from the oven

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore oven models, ensuring a perfect fit and reliable heat generation for your specific appliance.

This part fixes the following symptoms

Little to no heat when baking
Oven is too hot
Oven not heating evenly
Won't start

Do-It-Yourself Stories from Customers like You The baking element on our 28 year old oven decided to quit on new year's eve while preheating we heard a loud crackling pop which was the element shorting out it bubbled and started smoking Cynthia B. • Waukesha , WI • January 06, 2015

Of course, these things always seem to happen on a holiday! Luckily we were not having guests for dinner - so quickly changed our eating plans for the evening. I went directly online and Googled "Bake elements for GE ovens". At first I did not think I would have luck finding this part because of the oven's age. AppliancePartsPros.com was one of the service dealers listed first and catered specifically to GE appliances and parts. So, I typed in the Model number and low and behold, a screen... Read more

$49.95

Compare At:: $59.44
You Save:: $9.49

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Appliance Light Bulb

4.9 (373)

By: Whirlpool

Part Number: 8009

Original Whirlpool light bulb, 40 watt.

Symptoms of needing to replace the light bulb include:

Dimming or flickering light
Complete lack of illumination inside the appliance
Visible signs of damage or burnout on the bulb itself

Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.

Do-It-Yourself Stories from Customers like You Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

$17.76

Compare At:: $20.96
You Save:: $3.20

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Broil Element

4.9 (177)

By: Ge

Part Number: WB44X173

The Broil Element is an OEM part for GE ovens. It is designed to provide the high heat necessary for broiling food, such as meats and vegetables, allowing for a quick cooking process that seals in flavors and creates a deliciously crispy exterior.

Causes of a bad Broil Element can include failure due to internal coil damage, burnout from excessive use, or electrical issues such as short circuits or loose connections that prevent it from heating.

Symptoms of a bad Broil Element include:

The oven not heating up to the set broil temperature.
Uneven cooking or browning of food.
No visible glow from the element during operation.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when broiling
Oven not heating evenly
Won't start
Element will not heat

Do-It-Yourself Stories from Customers like You Broiler element burnt out on very old oven Deloris B. • Spokane , WA • November 23, 2015

I cannot not sing the praises of this company & their helpful & fast service. I am going to post the online site address w/my praises on my facebook page for my friends that live on ranches many miles from appliance repair shops & towns. The Oven in our house is for sure over 20 yrs old it was in this home when we bought it, the home is 33 yrs old & the Oven is a Wall Oven, there is not room for a standard Oven in this Kitchen. The Oven itself still looks very nice. About 8 yrs ago or more... Read more

$28.23

Compare At:: $61.01
You Save:: $32.78

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dishwasher Tub Corner Baffle (Left)

4.9 (246)

By: Ge

Part Number: WD8X228

The Tub Corner Baffle is an OEM part for GE dishwashers. This rubber component is placed in the corners of the dishwasher tub to prevent water from leaking out during the wash cycle. It acts as a barrier, directing water back into the tub and ensuring efficient operation. This is the left side. For the right side, use WD8X227.

Causes of a bad part can include prolonged exposure to detergents and hot water, leading to material breakdown, or physical damage from loading and unloading dishes.

Symptoms of a bad Tub Corner Baffle include:

Visible signs of wear or damage
Water leakage from the corners of the dishwasher door
Unusual noises during operation

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You Water emptied out under the door of my 24 yr old GE dishwasher on to the floor. Andrea B. • Harrisburg , PA • September 22, 2018

After researching on the APP site, I decided what I thought I would need and purchased a new Gasket, Gasket Insert, Left & Right Corner Baffles from APP. The parts were shipped immediately. However, I’m an 80 yr. old female so I procrastinated for almost 6 weeks before deciding to 'tackle' the repair myself rather than hiring an appliance repair person or "handyman". I went back into the AppliancePartsPros site and reviewed the wonderful videos related to the repair since Matt had made it... Read more

$12.95

Compare At:: $24.06
You Save:: $11.11

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dishwasher Tub Corner Baffle (Right)

4.9 (246)

By: Ge

Part Number: WD8X227

The Tub Corner Baffle is an OEM part for GE dishwashers. It is strategically placed at the corners of the dishwasher tub to prevent water from leaking out during operation. For the left side use WD8X228. Color: Black.

Symptoms of a bad Tub Corner Baffle include:

Water leaking from the corners of the dishwasher door.
Pools of water forming near the dishwasher after operation.
Decreased cleaning performance due to water escaping the wash cycle area.

Causes of a bad tub corner baffle can include wear and tear from regular use, improper installation leading to gaps or looseness, and degradation of the material over time due to exposure to detergents and high temperatures.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Water emptied out under the door of my 24 yr old GE dishwasher on to the floor. Andrea B. • Harrisburg , PA • September 22, 2018

$12.95

Compare At:: $24.06
You Save:: $11.11

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Lower Dishrack Roller Kit

5.0 (180)

By: Ge

Part Number: WD35X21038

The Lower Dishrack Roller Kit is an OEM part for GE dishwashers. This kit includes 8 wheels and 8 axles. It allows it to glide smoothly in and out of the dishwasher. Proper functioning of these rollers is crucial for the easy loading and unloading of dishes, ensuring that the dishrack moves efficiently along its tracks.

You should replace the lower dishrack roller kit if the rollers become worn out or damaged. Common causes of roller issues include wear and tear from frequent use, accumulation of debris, or breakage due to heavy loads or accidental impact.

Symptoms of a bad lower dishrack roller kit include:

Difficulty sliding the lower dishrack in and out
The dishrack derailing or not staying on its tracks
Unusual noises when moving the dishrack
Visible damage or wear to the rollers

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Door won't close

Do-It-Yourself Stories from Customers like You Dishwasher lower rack wheels were melted/broken and the rack wouldn't roll the washer would make a loud clunking noise while aggitating one of the rubber top tub restraints were broken Joseph Z. • Louisville , KY • September 23, 2016

I never respond to these kinds of requests but I must respond to this one because of your superior service! The best story here was that I ordered the parts from AppliancePartsPros at 4:15 p.m. one day, and they were on my porch by 2:00 p.m. the next day!! I am very impressed, so please keep up the great work. I'll add that the prices were the best I found too. The dishwasher wheels replacement didn't require tools & took less than 15 minutes. The original design/materials are not very... Read more

$30.71

Compare At:: $36.54
You Save:: $5.83

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Rack Slide End Cap

4.9 (252)

By: Ge

Part Number: WD12X10304

The Rack Slide End Cap is an OEM replacement part for GE dishwashers. This small but essential component is designed to secure the end of the rack slide rail, preventing the dish racks from sliding off the track or becoming misaligned.

Symptoms of needing to replace a rack slide end cap include:

Dish racks sliding off the track or becoming dislodged
Difficulty in smoothly sliding the racks in and out
Visible wear, cracks, or damage to the end cap itself

Causes of a faulty rack slide end cap can include normal wear and tear over time, exposure to heat or moisture, or physical damage due to impact or mishandling.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.

This part fixes the following symptoms

Door latch failure

Do-It-Yourself Stories from Customers like You Water would not drain Paula M. • Crestview Hills , KY • November 14, 2014

Replaced the pump drain assembly Read more

$10.74

Compare At:: $24.73
You Save:: $13.99

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Solenoid Armature And Linkage

5.0 (11)

By: Ge

Part Number: WD1X1316

The Solenoid Armature and Linkage is an OEM replacement part for GE dishwashers. It is responsible for controlling the dishwasher's draining process by operating the drain valve, which regulates the flow of water out of the dishwasher during the drain cycle.

Symptoms of a bad solenoid armature and linkage include:

Dishwasher not filling with water or filling improperly
Water leaks from the inlet valve area
Dishwasher not advancing to the next cycle due to water flow issues
Error codes or indicators related to water inlet problems

Causes of a bad solenoid armature and linkage can include mineral buildup or debris obstructing the valve, electrical malfunctions in the solenoid coil, or mechanical wear and tear of the linkage components.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.

Do-It-Yourself Stories from Customers like You Dishwasher wasn't draining Grace S. • Hartford , CT • August 02, 2019

About a year ago my dishwasher during a cycle was emitting a horrible plastic burning smell. We stopped it mid-cycle, cleaned it out and tried to run a few more cycles after that and realized it wouldn't drain so it sat in my kitchen broken for a year. I finally got so fed up with washing dishes by hand that I took the whole dishwasher apart. Confirmed there were no blockages in any of the hoses etc. when it still didn't work I googled the problem, found this website and found that it must be... Read more

$31.41

Compare At:: $37.06
You Save:: $5.65

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Shaft Seal

4.8 (134)

By: Ge

Part Number: WD8X181

The Dishwasher Shaft Seal is an OEM part for GE dishwashers. This seal is located around the motor shaft and prevents water from leaking out of the dishwasher tub where the motor shaft enters.Seal for pump drain valve shaft. Instruction sheet included. Push-on nut may have to be cut off, order WR2X7054.

Over time, regular use can cause the seal to deteriorate, or debris and mineral deposits can lead to damage. A compromised shaft seal can result in water leaks, potentially causing damage to your kitchen floor and dishwasher components.

Symptoms of a bad dishwasher shaft seal include:

Water leaking from the bottom of the dishwasher
Puddles or water damage around the dishwasher area
Unusual noises coming from the motor area due to water infiltration
Visible wear or cracks on the seal

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Leaking

Do-It-Yourself Stories from Customers like You My ge potscrubber dishwasher stopped washing dishes the soap from the container would just run down the door and the dishes would still be dirty Scott F. • Sanger , TX • January 23, 2016

Removing the bottom panel and watching the internals while the washer was running revealed a small drip from what appeared to be a plastic cam that was attached to a solenoid. The water was dripping from the shaft the cam attached to down into the solenoid. Being a DIY guy I pulled the washer out, turned it upside down and inspected the effected mechanism. It appeared that there was a seal on the shaft that was leaking. The water leaking into the solenoid caused it to rust and stick. A quick... Read more

$26.77

Compare At:: $32.12
You Save:: $5.35

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Push-On Nut

4.9 (128)

By: Ge

Part Number: WR2X7054

The Push-On Nut is an OEM part for GE appliances. This small component is typically used to secure various fittings and fastenings within appliances, ensuring they are tightly held and do not loosen over time. Its push-on design allows for easy installation, making it a straightforward solution for maintaining the structural integrity of your appliance components.

Symptoms of a failing Push-On Nut include:

Loose components within the appliance
Parts that seem to detach or move unexpectedly
Unusual noises due to parts rattling or shaking
Difficulty in securing components during repairs or maintenance

Causes of a bad push-on nut can include metal fatigue leading to loss of elasticity, corrosion from exposure to moisture, or general wear from repeated removal and installation.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

$7.37

Compare At:: $8.36
You Save:: $0.99

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Infinite Heat Switch Kit

4.8 (55)

By: Ge

Part Number: WB21X36771

The Infinite Heat Switch Kit is an OEM part for GE ranges and cooktops. This kit is essential for controlling the temperature of the burners on your range or cooktop, allowing you to adjust the heat level from low to high.

Causes of damage to the infinite heat switch can include normal wear and tear from frequent use, electrical issues such as short circuits or power surges, and physical damage from cleaning or impact.

Symptoms of a bad Infinite Heat Switch include:

Burners not heating to the desired temperature, either staying too hot or not getting hot enough.
The burner not turning on at all, indicating a possible failure in the switch's electrical contacts or circuit.
Inconsistent cooking temperatures, where the burner cycles on and off too frequently or not often enough, affecting cooking performance.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Had previously replaced one burner control because the burner indicator light stayed on William A. • Dodge Center , MN • July 13, 2015

I replaced all 3 remaining burner controls because they were all original (mid 1970s GE electric range w/coil burners), and one of the controls occasionally made arcing sounds when cycling the burner on and off. If a control is making odd noises - more than just a quiet metallic clicking as it cycles - it should be replaced. I'm assuming you have experience with the tools needed and can do simple mechanical assembly or disassembly, but have not previously worked with electrical equipment of... Read more

$49.68

Compare At:: $59.62
You Save:: $9.94

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Complete Ge Pump And Motor Assembly

4.9 (101)

By: Ge

Part Number: WD26X10013

The Complete GE Pump and Motor Assembly is an OEM replacement part for GE dishwashers. This assembly is integral to the dishwasher’s functionality, as it combines both the pump and motor components that work together to circulate water during the wash and rinse cycles. The pump forces water through the spray arms, while the motor drives this process, ensuring thorough cleaning of the dishes.

Over time, the pump and motor assembly can wear out due to constant use and exposure to water and detergents. Additionally, debris or hard water buildup can clog the pump, causing strain on the motor and leading to failures. Electrical issues or damage from power surges can also impair the assembly's performance.

Symptoms of a bad pump and motor assembly include:

The dishwasher not cleaning dishes properly
Water not circulating or spraying during cycles
Unusual noises, such as grinding or humming, coming from the dishwasher
Water not draining properly from the tub
The dishwasher not starting or completing cycles

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Won't start
Noisy
Will not drain

Do-It-Yourself Stories from Customers like You It wasn`t pumping the water out Jimmy N. • Louisville , KY • August 05, 2014

I fixed it by installing a ge pump and motor assembly. it works fine Read more

$193.28

Compare At:: $263.74
You Save:: $70.46

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Heating Element

4.9 (88)

By: Ge

Part Number: WB44X5099

This GE oven heating element is an OEM part for GE wall ovens and ranges. The element measures 18” wide x 15 1/2” deep With 1-1/2 inches from the mounting bracket to the end of the terminals that are screw-type. It generates 2585 watts at 240 volts or 1940 watts at 208 volts of heat within the oven cavity.

Symptoms of a bad heating element are:

Inadequate or uneven baking with cold spots
The oven taking excessively long to preheat or maintain set temps
Tripped circuit breakers indicating element failure

Causes of a bad heating element include deterioration of coil insulation from sustained exposure to temperatures upwards of 500°F. Normal wear reduces heat output over many years of use.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This part fixes the following symptoms

Oven is too hot
Oven not heating evenly
Won't start
Little to no heat when baking

Do-It-Yourself Stories from Customers like You Baking element broke broiler never worked since I moved in 13 years ago and the four burners on the stove top were slowly dying Marybeth K. • Milltown , NJ • November 13, 2017

With the help of Wendee and Karen, we finally figured out my model numbers and which parts where correct. I ordered the parts and all arrived the next day except for the Broiler element which arrived in 2 days. I installed the new Baking Element myself. Took longer to figure out which curcuit braker to turn off. In about 30 minutes I had a brand new Baking Element in my oven working perfectly. On the following day, I installed the Broiler Element. That took a bit longer as it sits in a metal... Read more

$42.95

Compare At:: $56.01
You Save:: $13.06

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

8 Inch Drip Pan

4.9 (99)

By: Ge

Part Number: WB32X10013

The ring comes separately: WB31X5014. Matching 6-inch drip pan: WB32X10012 and ring: WB31X5013.

The 8 Inch Drip Pan is an OEM part for GE ranges and stovetops. It is designed to sit underneath the burner element, catching spills, drips, and crumbs that fall during cooking. This not only helps in keeping the cooktop clean but also protects the stovetop and internal components from potential damage caused by food spillage.

Causes of a bad 8 Inch Drip Pan can include rusting due to prolonged exposure to moisture, warping from high heat, or accumulation of cooked-on spills and debris that can't be cleaned off.

Symptoms of a bad Drip Pan include:

Noticeable rust or corrosion
Warping or misshaping, affecting fit and function
Difficulty in cleaning, with residue that cannot be removed

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

$14.50

Compare At:: $19.06
You Save:: $4.56

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

8 Inch Trim Ring

4.9 (94)

By: Ge

Part Number: WB31X5014

The 8 Inch Trim Ring is an OEM part for GE ranges and cooktops. It fits around the 8-inch burner elements, providing a clean, finished look while also helping to contain spills and crumbs on the stovetop.

Symptoms of a bad 8 Inch Trim Ring include:

Misalignment or improper fit around the burner, which can affect cooking performance and cleaning.
Visible rusting, warping, or deterioration, which can detract from the appearance of the cooktop.
Loose fitting that may cause the ring to move or rattle during use.

Causes of a bad trim ring can include frequent exposure to high temperatures, spills of acidic or sugary substances that cause corrosion or damage, and general wear and tear from cleaning and use.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

If you’re looking to replace all of the trim rings and drip pans:

8” Drip Pan - WB32X10013
6” Drip Pan - WB32X10012
6” Trim Ring - WB31X5013

Do-It-Yourself Stories from Customers like You Discolored burner rings and missing oven timer/clock knobs on 30 year old ge electric stove Edward S. • Marietta , OH • December 05, 2015

Replaced above parts, easy to do, looks like a new stove. Needed to pry open knob stem slot segments very slightly to remove broken plastic from previous knobs. Spreading stem slot metal sides too much and they will break. With slots cleaned out, pinch stem sides almost together for new knobs to slide on. Customer service rep was helpful and parts delivery was next day as promised. Before contacting Appliance Parts Pros, I found their on-line customer reviews were much better than their... Read more

$15.95

Compare At:: $18.82
You Save:: $2.87

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Screws - 12 Pack

4.9 (75)

By: Ge

Part Number: WB1X500D

These GE screws are a 12-pack of OEM replacement parts responsible for securing and fastening various components and panels in a GE range or oven. These screws are designed with a hexagonal head, which allows for the use of a compatible wrench or socket for tightening. They are commonly used to attach sheet metal panels, brackets, and other parts within the appliance, ensuring that these components remain securely in place during operation.

This part fixes the following symptoms:

Loose or wobbly parts or panels within the appliance's interior or exterior
Panels or components falling out of place, creating gaps or exposing internal parts
Unusual noises or rattling sounds during the appliance's operation

The GE screws can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You The control knob spun freely without engaging to select cycle Polly H. • Glen Allen , VA • November 11, 2014

I pulled off the retaining clip with pliers then removed the old knob and timer dial. I replaced all the parts with the new ones and used pliers to reinstall the clip. The teeth on the new knob engage to select the cycle. https://www.youtube.com/watch?v=cQwLtRcHx9k Read more

$7.65

Compare At:: $9.10
You Save:: $1.45

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Rb626c1ww Parts

Oven Bake Element

Appliance Light Bulb

Oven Broil Element

Dishwasher Tub Corner Baffle (Left)

Dishwasher Tub Corner Baffle (Right)

Lower Dishrack Roller Kit

Rack Slide End Cap

Solenoid Armature And Linkage

Shaft Seal

Push-On Nut

Infinite Heat Switch Kit

Complete Ge Pump And Motor Assembly

Oven Heating Element

8 Inch Drip Pan

8 Inch Trim Ring

Screws - 12 Pack