Wtw495oxw2 Parts

The Drive Clutch Kit is an OEM replacement part for Whirlpool washing machines. As an integral transmission component, it includes the clutch that engages the drive motor to rotate the central agitator or impeller. 

Causes of a bad clutch kit include worn parts that have aged from repeated use. Signs include slipping, grinding, or clicking noises from the transmission area.

Symptoms of a faulty clutch kit are:

• The washer tub failing to turn or agitate clothes during wash cycles  
• Delayed starts or intermittent rotation
• Vibration or shaking sensed from the frontloader or toploader

This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

The Drive Hub Kit is an OEM replacement part for Whirlpool washers. This kit includes an important transmission component - the drive hub - along with mounting hardware. The drive hub transfers power from the washer motor to turn the wash basket and agitate laundry.

Symptoms of a bad drive hub can include:

• The washer failing to agitate clothes or spin excessively slow
• Strange noises coming from the drive assembly
• Difficulty shifting between cycles

Causes of a bad drive hub include normal wear over time, strain from heavy or unbalanced loads, or damage from impact or other external forces.

This OEM replacement kit is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

The Shifter Actuator is an OEM replacement part for Whirlpool washing machines. It is an electronic component located in the transmission assembly that controls the shifting between wash cycles. The shifter actuator receives signals from the control panel to change the drum rotation speed and direction depending on the selected wash cycle settings.

Symptoms of a bad shifter actuator include:

• The washer fails to change cycles or stay on one speed setting 
• Abnormal noises coming from the transmission area
• Delayed or hesitant shifting between cycles

Causes of failure are usually due to normal wear and tear over prolonged use. Not replacing the shifter actuator can result in transmission damage over time.

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

Note: This part has been redesigned and may appear different from the one you’re replacing. The small hood may have to be removed for proper installation.

The washer drive belt transfers motor power to the washer’s drive system so the basket spins and agitates. Replacing a stretched or broken belt helps stop squealing and slipping so cycles finish at proper spin speed.

What it does

• Links the drive motor to the washer’s drive/pulley system
• Restores spin and agitation when the belt is worn, glazed, or broken
• Can reduce squeal or burning-rubber smells from belt slip
• Helps prevent intermittent or no-spin conditions

What’s included
One drive belt.

Install notes

• Unplug power; turn off water
• Tip the washer back; remove the bottom shield/cover if present
• Route the belt over the motor and drive pulleys; rotate by hand to seat fully
• Inspect pulleys/drive parts for wear; run a spin or calibration test after install

This OEM Whirlpool belt is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.

The lid lock is an OEM replacement part for Whirlpool washers. It is designed to keep the door securely closed during operation.

Symptoms of a faulty lid lock:

• Washer will not start
• Washer stopping randomly during operation
• Lid will not lock

By replacing the latch, you can restore door closure and prevent interruptions in your washer's operation. Improve your washer's safety and efficiency with this durable Lid Lock Assembly.

This latch can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Please note:  The part might arrive in the locked position. Install the lid lock and power up your washing machine to reset the lock to the open position.

The Lid Latch Assembly is an OEM part for Whirlpool washing machines. It ensures that the washer lid is securely locked during operation, preventing it from being opened mid-cycle, which could cause water spills and interrupt the washing process. This component plays a vital role in the safety and functionality of the washing machine by ensuring that the lid remains closed during washing and spinning cycles.

Causes of a bad lid latch assembly can include regular wear and tear, electrical failures, or physical damage from forcefully opening or closing the lid. When the lid latch assembly is faulty, it can affect the washer's ability to start or complete a cycle properly.

Symptoms of a bad Lid Latch Assembly include:

• The washer not starting or stopping mid-cycle
• Error codes related to lid lock issues
• The lid not locking or unlocking properly
• The washer pausing unexpectedly during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Shift Actuator is an OEM replacement part for Whirlpool washing machines. It is an electronic component located inside the transmission that controls the shifting between wash cycles. The shift actuator receives signals from the washer control board to change modes, initiating proper movements to advance the cycle.

Symptoms of a bad shift actuator include:

• The washer fails to advance through cycles properly
• Gets stuck in one phase of the wash cycle
• Makes abnormal noises during operation
• Does not agitate or spin as expected

Over time, environmental factors and normal wear and tear can cause the shift actuator to malfunction. 

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

NOTE: This new version of the part features a redesigned black plastic housing with an adapter wire harness. It replaces the older version that came in red plastic. The new part is guaranteed to fit and function like the original.

The Tub Centering Spring Kit is an OEM replacement part for Whirlpool washing machines. This kit includes a set of springs that are essential for maintaining proper alignment and positioning of the wash tub within the outer cabinet.

Symptoms of needing to replace the tub centering spring kit include:

• Excessive vibration or shaking during the wash cycle
• Loud banging or knocking noises
• Tub becoming misaligned or off-center
• Leaks or water seeping due to increased stress on the tub

Causes of a faulty tub centering spring kit can include normal wear and tear over time, exposure to heavy or unbalanced loads, or physical damage due to impact or mishandling.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models.

The Suspension Bearing Kit is an OEM part for Whirlpool washing machines. It is designed to support the tub assembly and ensure smooth, stable operation during the wash cycle. The kit includes bearings and other components that help absorb vibrations and reduce noise, contributing to the longevity and efficiency of the machine. The 8-piece set has 4 types of suspension rod supports made of strong plastic and about 1.5 inches in diameter. 

Symptoms of a bad Suspension Bearing Kit include:

• Unusual noise during the spin cycle,
• Excessive vibration or "walking" of the washer,
• The washing machine drum sagging or appearing off-balance.

Causes of suspension bearing failure often involve wear and tear from regular use, overloading of the machine, or inadequate maintenance leading to deterioration of parts.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Agitator Bolt Washer is an OEM part for Whirlpool washing machines. It sits beneath the agitator bolt, providing a secure and tight seal to ensure the agitator remains firmly attached to the drive shaft. This washer plays a crucial role in the smooth and effective operation of the agitator during the wash cycle.

You should replace this agitator bolt washer if it becomes worn out, cracked, or lost. Causes of a bad washer can include regular wear and tear, exposure to harsh detergents, or high levels of agitation that can degrade the material over time.

Symptoms of a bad agitator bolt washer include:

• The agitator being loose or wobbling during the wash cycle
• Unusual noises coming from the agitator area
• Ineffective washing performance
• The agitator not staying in place

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Lid Lock Strike is an OEM part for Whirlpool washing machines. It is designed to interact with the lid lock mechanism, ensuring that the washing machine lid is securely locked during operation. This safety feature prevents the lid from being opened while the machine is running, which is essential for avoiding spills and ensuring the safety of users.

Symptoms of a failing Lid Lock Strike include:

• The washing machine lid failing to lock properly
• The washer not starting cycles or pausing mid-cycle due to a sensed open lid
• Error messages or indicator lights signaling locking issues
• Audible clicks without the lid locking

Causes of a bad lid lock strike often involve physical damage from frequent use, misalignment, or wear and tear that prevents the strike from properly engaging with the lock mechanism.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Washer Gear Case is an OEM part for Whirlpool washing machines. It is essential for the proper functioning of the washer's transmission system, which controls the drum's agitation and spinning motions during the wash and spin cycles. This gear case ensures that your washing machine operates smoothly and efficiently.

Causes of a bad gear case can include mechanical wear and tear from prolonged use, exposure to excessive loads, or internal component failure. Such issues can hinder the gear case's ability to manage the drum's movements effectively.

Symptoms of a bad gear case include:

• The washer not agitating or spinning properly
• Loud grinding or clunking noises during operation
• Oil or grease leaks from the bottom of the washer
• The washer failing to complete cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Washplate Bolt is an OEM part for Whirlpool washing machines. This bolt is designed to secure the washplate to the washer's drive shaft, ensuring stable and effective agitation during the wash cycle.

Causes of a bad washplate bolt can include stripping or wearing out from regular use, corrosion from exposure to water and detergents, or damage due to over-tightening or improper installation. A faulty bolt can compromise the washplate's stability and affect the washing machine's performance.

Symptoms of a bad washplate bolt include:

• The washplate being loose or wobbling during operation
• Unusual noises such as rattling or clunking during the wash cycle
• Poor cleaning performance due to ineffective agitation
• The washplate detaching from the drive shaft

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Drain Pump is an OEM part for Whirlpool washing machines. This component is essential for removing water from the washer during the drain cycle. It ensures that water is efficiently pumped out of the washing machine, preventing water from remaining in the tub after a wash cycle, which is crucial for the appliance's proper operation and the cleanliness of your laundry.

You should replace the drain pump if it becomes faulty or stops working. Common causes of a bad drain pump include blockages from debris or lint, wear and tear over time, or electrical malfunctions. These issues can prevent the pump from effectively draining water.

Symptoms of a bad drain pump include:

• Water not draining from the washing machine
• Unusual noises during the drain cycle, such as humming or grinding
• The washer stopping mid-cycle with water still in the tub
• Error codes related to draining issues on the washer's display

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Suspension Rod Kit is an OEM part for Whirlpool washing machines. This kit includes four suspension rods that support the washer tub and help absorb vibrations during the spin cycle. These rods ensure the tub remains balanced, providing smooth and quiet operation.

You should replace the suspension rods if they become worn or damaged. Over time, heavy loads, unbalanced loads, or general wear and tear can cause the rods to lose their ability to stabilize the tub effectively. This can lead to excessive vibrations and noise during the wash cycle.

Symptoms of a bad suspension rod kit include:

• Excessive shaking or vibrating during the wash cycle
• Loud banging or knocking noises
• Washer tub not staying centered
• Washer moving or walking during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Water Inlet Valve is an OEM part for Whirlpool washing machines. This valve controls the flow of water into the washer, allowing it to fill with the correct amount of water during the wash and rinse cycles.

Over time, the water inlet valve can become clogged with debris, develop electrical issues, or wear out, leading to problems with the water flow. Causes of a bad water inlet valve include mineral buildup from hard water, internal component failure, or damage to the valve body.

Symptoms of a bad water inlet valve include:

• The washing machine not filling with water
• Slow or insufficient water flow into the washer
• The washer filling with water when it should not
• Unusual noises during the filling process
• Leaks around the valve area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.