Snow Removal Equipment Carburetor

This part is an inlet needle. This inlet needle works like a valve to transport fuel into the carburetor bowl when the bowl has drained and then stops fuel intake when the carburetor bowl is full. A new inlet needle may be needed if the fuel is not flowing into the bowl as it is supposed to. This can be evident if the carburetor floods or if the engine does not have enough fuel when it's operating at high speeds. A visual inspection of the inlet needle can also be a good indicator of whether or not it needs to be replaced. If any physical signs of damage are present, the inlet needle will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine Tecumseh part and is an OEM part sourced directly from the manufacturer and it is sold individually. This inlet needle is compatible with snowblowers manufactured by Tecumseh and Toro.

The float shaft and pin are a genuine replacement for select Tecumseh carburetors on small lawn and garden equipment engines. The float shaft and pin are responsible for maintaining the fuel level within the carburetor. Over time because of repetitive motion, the float pin and shaft can break or become damaged, which will stop the carburetor from functioning properly. If the carburetor cannot function, the engine will not be able to perform. If left unattended, the engine and carburetor could fail completely or bigger issues could occur. Replacing the float is essential to getting the equipment back in order. This genuine float shaft and pin is designed for use on machines from Tecumseh, Poulan, Husqvarna, Lawn Boy, Cub Cadet, MTD, and Craftsman, and is compatible with a number of models. The fuel system should be drained and the engine should be cool before any engine repairs are started. Always wear gloves for hand protection. This float shaft and pin are made of durable materials and sold as a unit. No additional hardware or parts are included.

This is a nozzle tube that is used in the carburetor of many types of lawn and garden equipment. The nozzle tube fits into the primary body of the carburetor bowl and then passes through to the plastic float. The nozzle tube is the component that determines the right amount of fuel that should move into the engine. It is responsible for preventing air leaks and turning oil into a vapor that can be used in lawn and garden equipment.If there is an air leak in the engine of the machine, it could be caused by the nozzle tube. In this case, it needs to be replaced. Depending on how bad the leak is, the equipment could operate at much lower power than normal. Before replacing the nozzle, the tool should be placed on a surface and the spark plug wire should be disconnected.This nozzle tube is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. Each nozzle tube is designed to fit snowblowers, generators, and wood chippers with small engines from MTD, Cub Cadet, Toro, Briggs & Stratton, Craftsman, and Tecumseh.

This is a governor link designed to be used on small engine lawn and garden equipment. The link makes adjustments to the throttle on the machine to keep it running at a consistent and appropriate speed. If the tool is running too fast or too slow, the governor link will likely need to be set or adjusted. The governor link can become damaged or break through use and will need to be replaced. Inspect the springs and governor link to ensure they are fully operational. The link and springs should not be stretched out or damaged.This governor link is made to be used with wood chippers, tillers, and snowblowers created by Craftsman, Toro, Cub Cadet, Tecumseh, Lawn-Boy, MTD, and MasterCut. It is sold as an individual component. The part is a genuine OEM replacement component sourced directly from the manufacturer.

Carburetors must have tight seals to prevent too much air from getting into the carburetor at one time. If there are issues with a welch plug, it could cause an engine to lose power or to run rough. The plug might have lost its seal, it could have cracked, or it could have become lost. Sometimes, the vibration of the engine is enough to cause a plug to fall out if it is not tightly sealed. A loose fit will cause problems with the flow of fuel. This genuine OEM welch plug is sold individually and can help to seal your carburetor so your engine retains power. The part can be used with a range of lawn tractors, lawnmowers, snowblowers, and small engines. Compatible brands include Tecumseh, Lawn-Boy, Toro, Craftsman, and MTD.

This is a genuine replacement carburetor float designed to work with a range of small engines on lawn mowers, snow throwers, lawn tractors, and other equipment. The carburetor's job is to blend air and fuel to ensure that the engine can operate. A carburetor float helps control the flow of fuel, ensuring the proper level of fuel in the chamber. Carburetor floats are not subject to wear and tear type damage, but they are exposed to caustic gasoline and oxygen, as well as high heat. Over time, they degrade and will need to be replaced. If the engine continually floods and will not remain running, it could be that the carburetor float needs to be replaced. Replacing the carb float will require removing the airbox and cover, the air filter base, the fuel line, and the fuel linkage. Clean the carburetor and then remove the bowl. Remove the damaged float and replace it with a new one. Note that it's recommended to replace the carburetor gaskets at this time, too. This is an OEM replacement carburetor float, and it is sold individually. It works with Tecumseh, Toro, Lawn-Boy, Cub Cadet, MTD, and other brands.