Tecumseh Engine Parts

This is a genuine replacement screw designed for Tecumseh engines installed on Toro lawn mowers. While screws are used for many purposes on the engine and mower body, this screw is usually found holding the starter grille in place over the rewind starter. The grille serves a number of important purposes, including allowing airflow, preventing large debris from binding up the starter, and more. In most cases, screws do not suffer from wear and tear. However, there are many ways they might be damaged. Removing the screw with the wrong tool might round the head, for instance. The screw may also be rusted in place if the mower is left unprotected in the elements. Replacing the grille screen screws is a simple process and requires little more than a wrench or the appropriate socket and ratchet. Simply unscrew it, dispose of it, and install the new screw. This screw is made from metal for better durability and is a genuine OEM replacement part. It is sold individually and works with Toro mowers with Tecumseh engines. It is also compatible with Craftsman, Lawn-Boy, and Cub Cadet mowers.

This is a replacement condenser for select Tecumseh engines. The condenser is part of the ignition assembly and is required for proper operation of the ignition and optimal engine performance. The condenser is responsible for carrying the current and connecting the terminals. The condenser and ignition coil combine to create the ignition assembly and if one part is not working properly it can affect engine performance. When the ignition is not performing properly, or engine will not start or stay running, there could be a problem with the ignition assembly, and specifically with the condenser. This genuine OEM condenser is made to exact standards and is designed to work with engines in select lawn and garden equipment. The condenser is an electrical part and should always be replaced with gloves and on a cool engine that has been disconnected from power. This durable part is made of metal and wire and sold individually. Other parts of the assembly and hardware will require an additional purchase.

The main nozzle is a part of the carburetor in pressure washers and snowblowers. This is a part of the carburetor assembly and it can be located between the carburetor bowl and carburetor body. It passes through the plastic float component. The nzle is used to direct air or water in the right direction when using the lawn and garden equipment. The main nzle can experience wear and tear or damage which will make it incapable of blowing air or water.If the nzle is broken or cracked, it needs to be replaced. A set of basic tools and work gloves will be useful during the process. First, the carburetor will need to be removed from the equipment. Disassemble the carburetor to gain access to the main nzle. Take the original component out and replace it with a new part. Make sure to reassemble all components before use.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The main nzle is designed for use in the carburetor of snowblowers and pressure washers manufactured by Lawn-Boy, Briggs & Stratton, Toro, and Tecumseh.

As an ignition coil, this OEM replacement part is tasked with sending voltage to a spark plug whenever the engine is not currently running. It can be used in many tools including snowblowers and lawnmowers. If the ignition coil has malfunctioned or is no longer working, the engine on the lawn and garden equipment will not start. In some cases, a replacement governor arm will also be required.In some cases, when an ignition coil breaks or stops working properly, it will have evidence of cracks, carbon tracking, or burn marks. If visual inspection shows any of those things are present, the ignition coil will need to be replaced. Testing the ignition coil is simple and requires switching it out for a new one to see if the problems stop occurring. A spark tester can also be used to see if the ignition coil has gone bad.This ignition coil is a genuine OEM part sourced directly from the manufacturer. It is compatible with lawnmowers, generators, snowblowers, and tillers manufactured by Briggs & Stratton, Tecumseh, Craftsman, and Toro. It comes as an individual part. An ignition tester can be useful for installation and troubleshooting with this component.

This is a genuine OEM replacement fuel cap sourced directly from the manufacturer. The fuel cap is used on lawn and garden engines that are powered by fuel. It is an integral part of the machine's fuel delivery system. Fuel caps prevent fuel from seeping out of the fuel tank and becoming a safety hazard. The cap's primary function is to keep fuel in the tank and keep water and other contaminants out of the fuel. Everyday use and outdoor elements can cause deterioration of the fuel cap. During scheduled maintenance and refueling of the tank, a visual inspection can quickly show any damage that needs to be addressed. The fuel cap cannot be repaired; it is a one-piece molded-plastic component that must be replaced when necessary. Tools are not required to replace the fuel cap. Work gloves should be worn when working with fuel. Unscrew the broken fuel cap and remove it from the fuel tank. Screw the new filler cap in place. Make sure the threads are lined up and the fit is tight.This fuel cap is sold as an individual unit. It is compatible with fuel tanks on lawn mowers, tillers, generators, and other engines manufactured by Tecumseh, Craftsman, Toro, and Briggs & Stratton.

A primer bulb works to lubricate the engine with oil by pressing in the rounded tip of the primer bulb. It measures an inch in diameter and an inch tall. Over time these parts can wear out from sun exposure, contact with chemicals, or dry rot. The gasket may wear out before the primer bulb, so it is important to check this part regularly to discover any damage. Installing the new primer bulb kit should be easy and only take a few minutes. Only a screwdriver set and pliers are needed to complete this repair. This primer bulb kit works in conjunction with small engines, lawnmowers, log splitters, and pressure washers made by brands Briggs & Stratton, Craftsman, Cub Cadet, Lawn-Boy, MTD, Tecumseh, and Toro. It is a genuine OEM part and is sold individually.

This is a flywheel key manufactured by Craftsman and also used by Tecumseh for many of their small gasoline powered engines, particularly lawn mowers. A flywheel key is a part that sits between the flywheel and the crankshaft of the engine. When the engine turns over, the flywheel causes the equipment's moving parts to turn, such as the blades of a mower. A flywheel key is designed to sheer off or break without damaging the flywheel should the mower blades hit an obstacle. If the engine will not start, starts but does not have full power, or throws out a lot of engine oil and smoke, the chances are the flywheel key is damaged. If there is a tremendous amount of backlash when the user tries to pull the starting rope, that also is a sign of a damaged flywheel key. When a flywheel key is damaged, it causes the spark plug to fire out of synch with the proper fuel/air mixture coming into the cylinder. Remember when replacing the flywheel key, it is essential to use a replacement part like this one that is a genuine OEM manufacture part. It is identical the original.

The primary function of a carburetor is to mix fuel and air in the right ratio. Fuel enters the carburetor through the fuel inlet fitting and then to the float bowl which delivers fuel to the other circuits. From there, the fuel goes to the needle valve, which is actuated by the float. When there is insufficient fuel, the float will stay down, keeping the valve open. Once the chamber has enough fuel, the float will go up and close the valve. A failed float bowl may leak or have too many dirt particles deposits that impede fuel flow. Luckily, you can easily replace a busted float bowl. This part is a genuine OEM Tecumseh 631867 float bowl replacement. You’ll have the assurance that this replacement is manufactured according to Tecumseh’s highest standards. It is compatible with mowers, tractors, and snowblowers from Toro, Cub Cadet, Lawn-Boy, MTD, and Tecumseh. This part is sold individually.

This is a fuel fitting that is part of the fuel assembly on many models of snowblowers and lawnmowers with engines. It's made of durable metal and plastic. The part is used to move fuel from the fuel tank into the engine carburetor. The fuel fitting is responsible for drawing the pressure needed to pump fuel so the lawn and garden equipment can operate. The fuel fitting can be damaged through use or impact and will no longer work as expected. If this occurs, the fuel fitting will need to be replaced.Depending on the equipment that contains the fuel fitting, tools for a replacement might include a pair of pliers, a screwdriver, and a hex key. If a visual inspection shows that the fuel fitting is cracked, turn off the equipment and disconnect the spark plug wire. Remove the fuel fitting from the carburetor and the fuel tank and replace it with a new part.This fuel fitting is designed to be used with lawn mowers and snowblowers manufactured by Lawn-Boy, Toro, Tecumseh, and Cub Cadet. It is sold as an individual part. This is a genuine OEM replacement part that is directly sourced from the manufacturer.

This replacement stud is designed for use in select lawn mowers. The carburetor mounting stud is specialty hardware that is used to mount the carburetor on the engine assembly. The stud bolt secures the carburetor, but it is subject to extreme temperatures and ongoing vibrations so it can become worn or even snap over time. Without a stud bolt, the carburetor will not be properly affixed to the rest of the engine, which means it will not be able to run properly. Replacing a faulty stud bolt should be done as soon as possible. This OEM stud bolt is manufactured to exact standards and is compatible with 150+ models from the Tecumseh brand, as well as select mowers from Toro and MTD. The bolt requires pliers and a socket set to replace. Always allow the engine to cool completely and drain the fuel system before performing work on the carburetor or internal engine parts. This stud bolt is made of durable metal and sold as a single unit.

This part is a screw used on outdoor power equipment. A screw is used to fasten components together to secure them in place. A new screw may be needed if the original screw has been lost. These parts are small and can be easy to lose. Another reason that a new screw may be needed is if it is stripped and is no longer holding components securely in place. It is also possible that a screw could become physically broken under high impact situations. In all of these situations, a new screw will be needed. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine Tecumseh part and is an OEM part sourced directly from the manufacturer and it is sold individually. This screw is compatible with snowblowers and snow throwers that are manufactured by Tecumseh, Toro, Lawn-Boy, and MTD.

This is a Tecumseh repair manual that has instructions and tips about working with 4-cycle L-head engines in various types of lawn and garden equipment. This is an important component for anyone who plans to service, repair, or replace parts in any number of Tecumseh machines. It is a needed item for those who use lawn equipment with a specific kind of engine. Repair manuals can be damaged in many ways and experience water damage, holes, scratches, or torn pages. The repair manual can also go missing and a new one will be needed to read more about Tecumseh repairs.If a user has lost their Tecumseh repair manual or needs one because it was never provided, this version is what will give instructions for repairing and replacing different parts of the lawn and garden equipment components. The repair manual has extensive information about making repairs and will speed up any work that needs to be done.This Tecumseh repair manual is a genuine OEM replacement document that is directly sourced from the manufacturer. It is sold as an individual manual. This part can be used with lawnmowers and snowblowers from Tecumseh, Lawn-Boy, Craftsman, and Cub Cadet.