Tecumseh Engine Parts

This cylinder head gasket is an original OEM part sourced directly from the manufacturer, Tecumseh. It is sold individually. A cylinder head gasket is an important piece of hardware designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as a lawn mower, a snow blower, a generator, and a wood chipper. It is compatible with products by brands such as Briggs & Stratton, Craftsman, Toro, Tecumseh, and Simplicity.The cylinder head gasket part is crucial because it serves as the seal between the engine block and cylinder head or heads. Its purpose is to seal the combustion gases within the cylinders, thereby avoiding leaking of coolant or engine oil into the cylinders. Leaks in the head gasket can be problematic because they prevent the engine from running properly and often lead to overheating.The replacement or repair process of the cylinder head gasket should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This replacement part is a spring and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Tecumseh. This spring is used in different parts inside the engines of different equipment and aids in the engine running smoothly and efficiently. A new spring might be needed if the current one is damaged or missing from the device. If the user hears noises from the engine that are not typical, it might be time to replace this part. It is common that the spring be worn down after years of normal wear and tear. Be sure the device is completely powered down before attempting to replace any spring or other part near or inside the engine. Always wear working gloves while attempting this repair. This spring is sold by itself and is a genuine OEM replacement part sourced directly from the manufacturer. Be sure to reference the owner's manual for specific instructions on how to replace this part.

The recoil starter assembly is a replacement for the starter on lawn equipment. It has been sourced from the original equipment manufacturer to ensure a proper fit. The assembly allows users to start up their equipment by pulling on the starter rope. This causes the cogs to engage with the drive cup on the flywheel, so the engine can start. Over time, this assembly can start to have some wear and tear issues and might need replacement. It might have cracks or pieces broken off, including on the interior of the assembly. This could make it more difficult, or even impossible, to get the engine to start. Replacing the entire assembly could be the needed fix. The genuine OEM part is a complete assembly that includes the plastic shroud, the recoil spring, starter pulley, pull rope, and handgrip. The part can be used with lawn mowers, pressure washers, wood chippers, and other small engines. It is compatible with Tecumseh, Toro, Lawn-Boy, Cub Cadet, Craftsman, and Briggs & Stratton.

This on-off switch terminal is composed of electrical contact areas that connect to a charge or load on a battery. One is marked for positive current while the other is where the current returns to. These terminals can sometimes stop working or suffer corrosion which makes them dangerous to use. Brushing and cleaning a terminal can help remove dirt and debris, but a malfunctioning terminal requires a replacement. This is the case if the corrosion is severe enough to eat away at the metal or the terminal doesn’t clamp on the way that it should. The battery terminals can be removed and replaced using tools like pliers, a socket set, a wrench set, and a hacksaw. This terminal is a genuine OEM component directly from the manufacturer. It’s designed to be used on engines of snowblowers, lawnmowers, chipper shredders, and tillers. It is compatible with Tecumseh, Husqvarna, Toro, Troy-Bilt, Craftsman, Simplicity, Cub Cadet, Briggs & Stratton, and MTD equipment. Some items that can help with installation include anti-corrosion spray, felt pads, and heat-shrink tubing.

This is a carburetor bowl. It holds the gas that is mixed with air before it enters the engine. The carburetor bowl contains a float which regulates the amount of gas needed to mix and fuel the engine.There are times when the carburetor in of itself is considered in good working order but the bowl may be compromised. This can happen if the bowl has been corroded. Rust will damage the carburetor bowl and render it ineffective. When replacing the carburetor bowl, be sure to work in a well-ventilated area and to wear the proper gear when handling engine parts. Once the carburetor is free from the engine, unscrew the bowl from the unit over a catch pan. Any contents will fall into the pan. Disassemble the old bowl's hardware and use it when installing the new bowl.This is a genuine OEM part manufactured by Tecumseh. It is compatible for Toro, Cub Cadet, and MTD engines.

This breather gasket is made of durable but flexible plastic, designed to seal the cylinder block and the breather body. A breather is a pipe that enables internal combustion in the engine to properly vent any crankcase pressure out of the engine. It is essentially a venting pipe or system and ensures that the engine's piston rings seal tighter against the cylinder walls (however many there are in that engine). When this gasket dries out, that pressure and seal cannot be created effectively and the engine may malfunction. Replacing the breather gasket means using a wrench to disassemble the breather, clean the surfaces, remove the original gasket, and use this authentic replacement part before reassembling This is an OEM replacement part designed for Toro, Tecumseh, Lawn-Boy, MTD, and Husqvarna equipment, including snowblowers and other small engine systems. This item ships individually.

This is a breather designed to be used on various types of lawn and garden equipment. The breather is an essential part that is responsible for venting out excess air from the engine's crankcase. If the equipment's engine isn't working as well as it used to, it could be related to a broken or damaged breather. In this situation, the breather will need to be replaced.Replacing the breather will require a socket set, a nut driver, a Phillips head screwdriver, and a set of pliers. Inspecting the breather or making a replacement starts with removing the equipment's muffler. This will give access to the original breather for visual inspection. If it has damage, it should be removed. The new part can be replaced before reassembling the tool.This breather is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The breather is designed to fit onto lawnmowers, snowblowers, tillers, generators, and wood chippers manufactured by Briggs & Stratton, Craftsman, Toro, Cub Cadet, Tecumseh, Lawn-Boy, MTD, and Simplicity.

This air filter is manufactured by Tecumseh and is an OEM replacement part for select compatible engines on lawn and garden equipment. The air filter system in an engine is designed to help ensure maximum airflow and remove dirt and debris from the air as it is entering the carburetor and the engine. This filter is made of durable plastic and composite paper materials and includes metal screening to help catch more debris and ensure the filter holds its shape. The air filter will collect particles of dirt and debris, and over time it can become clogged from regular use. Air filters should be replaced regularly as a part of routine maintenance, and this replacement part will do the job for models that take the filter. Always disconnect the spark plug when performing maintenance. Replace air filters annually or as needed and choose genuine OEM parts like this filter for the best results. This OEM filter can be used with several different engines made by Tecumseh, including 7, 8, and 10 HP models. This part may be used on generators, wood chippers, or other small engines from Briggs & Stratton, Craftsman, Tecumseh, MTD, and Simplicity.

This part is a replacement muffler. This is a genuine OEM part made by Tecumseh and has been sourced directly from the manufacturer. It can be used to replace a broken or otherwise defective muffler in a variety of small engine outdoor power equipment. The muffler helps to reduce noise and vibration emitted by the equipment's engine. If this part becomes faulty or detached, it will need to be replaced. It's advisable to wear work gloves to protect the hands. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this muffler, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this muffler is suitable for use on several different models of small engine outdoor power equipment manufactured by Tecumseh. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This is an ignition coil, also known as a starter coil, responsible for transferring the low current from a battery to the spark plug to create a spark that will start the engine. Designed to increase the intensity of ignition energy, the ignition coil steps up the voltage and can be considered as one of the keys to effective combustion. Engine misfires and equipment stalls are indications of a faulty ignition coil. If the equipment starts then shuts down, the coil may be damaged or loose. A machine that won't restart while it's hot is also a sign of a bad coil that needs replacement. This OEM replacement part is sourced straight from the manufacturer. It works with specific models of pressure washers, generators, lawnmowers, and small engines from Craftsman, Briggs & Stratton, MTD, Toro, and Husqvarna. It is sold individually.

This filler tube is designed for use on lawnmowers as a part of the oil system. The tube sits inside of the crankcase and has a rubber seal to prevent any leaking between the two components. It allows people to test the oil level using a dipstick. It is made of durable plastic but may experience damage or breakage over time. If the filler tube for a lawnmower is broken or cracked, leaking can occur. Taking a look at the tube will give an indication of whether the part is in good shape. If there is any issue with the tube, it needs to be replaced. The filler tube attaches to the lawnmower using a screw so a screwdriver is needed for the repair. Simply unscrew the old filler tube and place the replacement component in its place. Put the screw back in and tighten it before using the lawnmower. This filler tube is a genuine OEM replacement part sourced directly from the manufacturer. It comes as an individual part. The tube is compatible with lawnmowers from Craftsman, Lawn-Boy, Toro, and Tecumseh. It comes with gaskets to fit several different types of lawnmowers.

This is a replacement crankcase gasket that can be used for a range of outdoor power equipment and small engines including lawn mowers. The crankcase gasket helps to provide a seal between the crankcase and the crankcase cover. It will help to ensure that there are no oil leaks, which could cause performance problems with the engine. The crankcase gasket should be checked on when owners do regular maintenance to their machines. The gaskets can start to have problems the longer they are used. They can start to dry out and crack, and they may even break. These kinds of issues could then cause an oil leak. This not only causes a mess, but it will waste oil. The replacement is relatively easy to perform. The crankcase gasket is made from durable material, and it is a genuine OEM part right from the manufacturer. It can be used with many types of small engines including those found on pressure washers and lawn mowers. Brands with compatible models include Tecumseh, Lawn-Boy, Toro, and Briggs & Stratton.

This replacement cylinder head gasket is a genuine part manufactured by Tecumseh for use in select lawn and garden engines. The cylinder head gasket is designed to fit between the cylinder head and the crankcase, sealing the flow of air and fuel through the engine and preventing oil from getting into the fuel. The gasket is exposed to high heat and constant pressure and will become brittle and worn over time. This could affect the seal and lead to bigger problems, so an immediate replacement is necessary. This OEM cylinder head gasket is manufactured to exact standards by Tecumseh and can be used in select models from the brand, as well as those from Toro and Lawn-Boy. The gasket fits certain models of pressure washers, lawnmowers, and chippers. It is sold as an individual unit and doesn't include any hardware or accessories. Replacing the cylinder head gasket should only be done when the engine is cool. Wear gloves and work in a well-ventilated space when doing this kind of work for safety. When replacing gaskets, always use care with the new part so that it doesn't get broken or damaged during installation.

This breather tube is a genuine OEM replacement part sourced directly from the manufacturer. It is used on various lawn mowers and small engines to provide ventilation to the engine crankcase and prevent pressure buildup. It attaches to the cylinder assembly so that air can flow in and out and prevent damage to the engine. The breather tube on lawnmowers also has a reed that lubricates the pistons by collecting oil and sending it back to the crankcase. Over time, the breather tube may become dry and brittle, resulting in cracks. A damaged breather tube can lead to blown seals and gaskets, oil leaks, and reduced engine performance. Oil leaks are identified by bluish smoke coming from the exhaust, engine backfiring, or a decrease in overall performance. If this occurs, check the breather tube for clogs or damage. Replacing the breather tube requires a cooled-down muffler and screwdriver. Remove the muffler to reach the tube. Remove the screws holding the tube in place. Remove the tube and check for damage and clogs. Replace with a new tube if it is damaged. Reinstall the tube and screws. Reinstall the muffler. This breather tube is made of durable rubber and is sold as an individual part. The tube does not come with retaining screws. It is compatible with lawn mowers and small engines manufactured by Tecumseh, Toro, and Cub Cadet.

This is a recoil pull starter used in various snowblowers from major manufacturers. The recoil pull starter is a part of the starter assembly and assists with ensuring the engine gets the right amount of power to start when a user pulls the starter rope. Wear and tear or impacts can cause damage to the starter and it will eventually fail. One of the primary symptoms of a bad recoil pull starter is a slack pull cord when trying to engage the engine to use the snowblower. If this occurs, the recoil pull starter needs to be replaced.Turn off the snowblower and disconnect the spark plug wire before removing the recoil housing cap. Untie the pull rope and replace the starter with a new replacement component. Re-tension the spring with the new recoil starter before reattaching the cap that holds the pulley. Reinstall and coil the cord before reassembling other components.This is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The recoil pull starter is designed to be compatible with snowblowers manufactured by Lawn-Boy, Toro, Tecumseh, and Cub Cadet.