Tecumseh Parts

Spark plug covers can help to ensure added protection for the sparkplugs and can make sure that there is no debris getting on them. While the spark plug covers are long-lasting, they will eventually need to be replaced. Over time, they will start to dry, crack, and come apart. When this happens, replace the covers right away. Also replace the spark plugs at the same time. The OEM spark plug cover is sold individually, be sure to get enough to cover all the plugs. The cover can work with many different brands, including Craftsman, Briggs & Stratton, Toro, Cub Cadet, Troy-Bilt, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity. The covers can work for many types of machines, including lawnmowers, generators, chippers, log splitters, edgers, pressure washers, tillers, and other small engines.

This is a flywheel key manufactured by Craftsman and also used by Tecumseh for many of their small gasoline powered engines, particularly lawn mowers. A flywheel key is a part that sits between the flywheel and the crankshaft of the engine. When the engine turns over, the flywheel causes the equipment's moving parts to turn, such as the blades of a mower. A flywheel key is designed to sheer off or break without damaging the flywheel should the mower blades hit an obstacle. If the engine will not start, starts but does not have full power, or throws out a lot of engine oil and smoke, the chances are the flywheel key is damaged. If there is a tremendous amount of backlash when the user tries to pull the starting rope, that also is a sign of a damaged flywheel key. When a flywheel key is damaged, it causes the spark plug to fire out of synch with the proper fuel/air mixture coming into the cylinder. Remember when replacing the flywheel key, it is essential to use a replacement part like this one that is a genuine OEM manufacture part. It is identical the original.

The primary function of a carburetor is to mix fuel and air in the right ratio. Fuel enters the carburetor through the fuel inlet fitting and then to the float bowl which delivers fuel to the other circuits. From there, the fuel goes to the needle valve, which is actuated by the float. When there is insufficient fuel, the float will stay down, keeping the valve open. Once the chamber has enough fuel, the float will go up and close the valve. A failed float bowl may leak or have too many dirt particles deposits that impede fuel flow. Luckily, you can easily replace a busted float bowl. This part is a genuine OEM Tecumseh 631867 float bowl replacement. You’ll have the assurance that this replacement is manufactured according to Tecumseh’s highest standards. It is compatible with mowers, tractors, and snowblowers from Toro, Cub Cadet, Lawn-Boy, MTD, and Tecumseh. This part is sold individually.

This is a fuel fitting that is part of the fuel assembly on many models of snowblowers and lawnmowers with engines. It's made of durable metal and plastic. The part is used to move fuel from the fuel tank into the engine carburetor. The fuel fitting is responsible for drawing the pressure needed to pump fuel so the lawn and garden equipment can operate. The fuel fitting can be damaged through use or impact and will no longer work as expected. If this occurs, the fuel fitting will need to be replaced.Depending on the equipment that contains the fuel fitting, tools for a replacement might include a pair of pliers, a screwdriver, and a hex key. If a visual inspection shows that the fuel fitting is cracked, turn off the equipment and disconnect the spark plug wire. Remove the fuel fitting from the carburetor and the fuel tank and replace it with a new part.This fuel fitting is designed to be used with lawn mowers and snowblowers manufactured by Lawn-Boy, Toro, Tecumseh, and Cub Cadet. It is sold as an individual part. This is a genuine OEM replacement part that is directly sourced from the manufacturer.

This replacement stud is designed for use in select lawn mowers. The carburetor mounting stud is specialty hardware that is used to mount the carburetor on the engine assembly. The stud bolt secures the carburetor, but it is subject to extreme temperatures and ongoing vibrations so it can become worn or even snap over time. Without a stud bolt, the carburetor will not be properly affixed to the rest of the engine, which means it will not be able to run properly. Replacing a faulty stud bolt should be done as soon as possible. This OEM stud bolt is manufactured to exact standards and is compatible with 150+ models from the Tecumseh brand, as well as select mowers from Toro and MTD. The bolt requires pliers and a socket set to replace. Always allow the engine to cool completely and drain the fuel system before performing work on the carburetor or internal engine parts. This stud bolt is made of durable metal and sold as a single unit.

This is a genuine OEM screw replacement sourced directly from the manufacturer. It is a muffler stud screw used on lawn mowers, snowblowers, and other outdoor lawn and garden engines. This muffler screw attaches the muffler to the engine. These screws go directly through the muffler case and into the engine housing. There is no need for a nut or other fastener. Over time, vibration from the engine may cause them to loosen and possibly fall out. If this happens, the muffler can fall off. Periodic inspection and tightening will prevent this from occurring. A visual inspection as well as checking the tightness by hand will reveal any issues.If the screws are missing or rusted and need to be replaced, make sure the muffler has cooled before attempting to remove the screws. Use a wrench to remove the screws from the muffler. Insert the new screws and hand tighten. Use the wrench to tighten slightly more. Be careful not to overtighten and strip the screws. These screws are 1/4-20 x 2-9/32, gold in color, and sold individually. These muffler shoulder screws are compatible with lawnmowers, snow blowers, chippers, edgers, pressure washers, and other engines manufactured by MTD, Craftsman, Tecumseh, Toro, and Cub Cadet.

This part is a screw used on outdoor power equipment. A screw is used to fasten components together to secure them in place. A new screw may be needed if the original screw has been lost. These parts are small and can be easy to lose. Another reason that a new screw may be needed is if it is stripped and is no longer holding components securely in place. It is also possible that a screw could become physically broken under high impact situations. In all of these situations, a new screw will be needed. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine Tecumseh part and is an OEM part sourced directly from the manufacturer and it is sold individually. This screw is compatible with snowblowers and snow throwers that are manufactured by Tecumseh, Toro, Lawn-Boy, and MTD.

This is a Tecumseh repair manual that has instructions and tips about working with 4-cycle L-head engines in various types of lawn and garden equipment. This is an important component for anyone who plans to service, repair, or replace parts in any number of Tecumseh machines. It is a needed item for those who use lawn equipment with a specific kind of engine. Repair manuals can be damaged in many ways and experience water damage, holes, scratches, or torn pages. The repair manual can also go missing and a new one will be needed to read more about Tecumseh repairs.If a user has lost their Tecumseh repair manual or needs one because it was never provided, this version is what will give instructions for repairing and replacing different parts of the lawn and garden equipment components. The repair manual has extensive information about making repairs and will speed up any work that needs to be done.This Tecumseh repair manual is a genuine OEM replacement document that is directly sourced from the manufacturer. It is sold as an individual manual. This part can be used with lawnmowers and snowblowers from Tecumseh, Lawn-Boy, Craftsman, and Cub Cadet.

This cylinder head gasket is an original OEM part sourced directly from the manufacturer, Tecumseh. It is sold individually. A cylinder head gasket is an important piece of hardware designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as a lawn mower, a snow blower, a generator, and a wood chipper. It is compatible with products by brands such as Briggs & Stratton, Craftsman, Toro, Tecumseh, and Simplicity.The cylinder head gasket part is crucial because it serves as the seal between the engine block and cylinder head or heads. Its purpose is to seal the combustion gases within the cylinders, thereby avoiding leaking of coolant or engine oil into the cylinders. Leaks in the head gasket can be problematic because they prevent the engine from running properly and often lead to overheating.The replacement or repair process of the cylinder head gasket should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This replacement part is a spring and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Tecumseh. This spring is used in different parts inside the engines of different equipment and aids in the engine running smoothly and efficiently. A new spring might be needed if the current one is damaged or missing from the device. If the user hears noises from the engine that are not typical, it might be time to replace this part. It is common that the spring be worn down after years of normal wear and tear. Be sure the device is completely powered down before attempting to replace any spring or other part near or inside the engine. Always wear working gloves while attempting this repair. This spring is sold by itself and is a genuine OEM replacement part sourced directly from the manufacturer. Be sure to reference the owner's manual for specific instructions on how to replace this part.