Need Help?
Call or text
Show parts
The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells. This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.
This part is discontinued by the manufacturer and is no longer available for purchase.
Replacement lid for top-load washers. Covers and secures the drum during operation. Replace if cracked, broken, won't stay closed, or damaged from wear.
Washer lid won't lock or stay closed? This lid strike assembly holds the lid securely in place. Simple DIY repair—lift top panel to access and replace.
Cushions the washer lid when closing to prevent direct contact with the cabinet. Replace if cracked, worn, or missing to protect the lid finish.
Left-side door hinge for washers. Replace when door sags, won't close properly, or makes scraping sounds. Restores alignment and secure closure. Verify fit with your model number before ordering.
Replacement lid hinge for top-load washers. Secures the washer lid and allows smooth opening and closing. Order when hinge is cracked or broken.
8-16 x 3/8 inch screw fastener for dryers. Secures baffles to drum and various internal components. Replace if missing, stripped, or damaged.
Stainless steel 10-32 screw secures panels, brackets, and hardware inside your washer. Replace if lost, stripped, or corroded during repairs.
Chrome Shadow finish top panel for your washer. Replaces cracked, dented, or discolored exterior panels. Restores the appearance of your appliance.
White top panel for your washer. Replace this structural cover if it's cracked, chipped, discolored, or damaged. Restores the clean appearance of your machine.
If your washer won't start, displays error codes, or cycles malfunction, the electronic control board may have failed. This repair restores all functions.
This 8-18 x 5/8-inch screw secures dryer panels, brackets, and covers. Replace missing or stripped fasteners to restore a tight fit and stability.
Replace your range hood grease filter if you notice reduced airflow, excess grease buildup, or poor ventilation. Traps cooking residue to protect the fan.
Secures the rear bulkhead to the washer tub, reducing vibrations. Replace if damaged by water exposure, stripped threads, or rusted from age.
Power cord for washers delivers electricity from wall outlet to internal components. Replace if damaged, chewed, cracked, or missing to restore power supply.
Grey control panel bezel for washers. Replaces cracked, broken, or discolored bezel trim around the control panel. Restores appearance and finish.
Usually ships within 4 - 14 days
White plastic bezel that frames the washer control panel. Replaces cracked, discolored, or broken bezels to restore a clean finished appearance.
Fix a cracked or discolored lid lock bezel on your washer. This bezel snaps around the lid lock assembly. Easy install—remove lid lock, pinch tabs, lift out.
Fix a washer lid that won't lock with this lid lock bezel. Replaces cracked or broken bezels that prevent the wash cycle from starting. Easy DIY fix.
Fix a washer that won't start or stays locked with a new lid lock assembly. This safety latch secures the lid during cycles. DIY-friendly repair.
Secures wiring harness to washer top panel. Replace this clip if original is broken, missing, or no longer holding wires firmly in place during operation.
Fix detergent not dispensing or drawer leaking issues with this washer dispenser drawer. Direct fit replacement for top-load washers. Easy install.
Fix detergent not dispensing or drawer leaking issues with this washer dispenser drawer assembly. Holds detergent and fabric softener during wash cycles.
Fix F5E1 error code or washer that won't start with this faucet switch assembly. Located near the dispenser drawer on top-loading washers. Straightforward DIY fix.
Fix a washer that won't fill or has a broken fill switch with this faucet switch assembly. Requires removing the top panel and control panel to install.
Grey bezel for washer control panel. Replaces cracked, broken, or discolored bezels. Restores appearance and protects controls on your machine.
White control panel bezel for washers. Covers and protects the control panel area. Replace if cracked, discolored, or broken to restore appearance.
Fix washer control issues with this switch mounting screw. Secures cycle selector switch in console for reliable function. Simple DIY fix in minutes.
Fix detergent not dispensing or leaking from your washer dispenser with this housing and valve assembly. Replaces the drawer housing and integrated valve.
Fix a washer that won't fill, overfills, or fills slowly with this water inlet valve assembly. Controls water flow into the drum during wash cycles.
Fix dispenser not working or erratic dispensing with this washer dispenser wiring harness. Restores electrical signals to soap and fabric softener.
Secures baffles to the dryer drum interior. Replace worn, stripped, or missing screws to keep baffles firmly attached and prevent rattling during operation.
White outer cabinet shell for laundry center units. Replace if cracked, dented, rusted, or damaged. This structural housing encloses washer components.
Color: Grey (Chrome Shadow)
Replacement name plate that restores your appliance's identification label. Needed when the original plate is faded, damaged, or missing.
Adjustable leveling leg threads into the washer base to support and stabilize the unit. Replace if cracked, stripped, or missing to level cabinet.
Metal panel with foam insulation that installs behind the washer tub to dampen noise and vibration. Replace if cracked, detached, or missing foam padding.
Replacement brace for washers. This structural support part mounts inside the cabinet to stabilize components. Order a new brace if original is cracked or broken.
Fix washer shaking, imbalance, or knocking during spin cycle. This vibration absorber pad dampens movement and reduces noise. DIY-friendly repair.
Molded protective cover that shields wiring from heat and abrasion in laundry centers. Replace if cracked, broken, or missing to protect wires safely.
Rear panel for laundry centers. Replaces cracked, dented, or damaged back covers. Restores the structural enclosure and finished appearance.
Genuine mounting screw for securing dryer panels and components. Replace missing, stripped, or damaged screws to restore proper fastening and alignment.
The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear panel onto the cabinet frame, ensuring a sturdy connection between housing components. Proper installation is critical for the washer's structural integrity.
Causes of a bad screw include corrosion from repeated water exposure or stresses from years of use. Loosening can occur from vibrations weakening the threads over time.
Symptoms of a bad screw include:
This OEM Whirlpool replacement screw helps maintain a tight panel closure. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Flexible tube that drains used water from your washer tub to the standpipe. Replace if cracked, leaking at connections, or torn along the length.
Secures wiring bundles inside your microwave. Replace this wire tie if it's cracked, broken, or missing to keep internal wires organized and secure.
Secures U-shaped drain hoses or heating elements in washers. Replace if cracked, broken, or missing to prevent hose movement and potential leaks.
Secures washer hoses and prevents leaks by maintaining consistent pressure. Replace if you notice water leaks or loose connections. Verify fit with your model.