Parts for Ge GTUP240EM3WW: 03 - Tub, Basket & Agitator Parts

This 24" basket assembly replaces a damaged or missing internal storage basket and restores secure support for items inside the appliance. It's a direct-fit replacement designed to slide into the existing rack supports for normal use. What it does:

• Provides a stable tray to hold cookware, dishes or items that sit inside the appliance.
• Replaces broken, cracked or warped baskets that no longer support loads safely.
• Restores smooth sliding and alignment with rack guides when the original basket is worn.
• Helps prevent items from shifting or falling during operation or loading.

• Disconnect power and water before beginning any service.
• Remove remaining items from the appliance and slide out the existing basket for replacement.
• Inspect rack guides and clips for wear; replace worn mounting hardware if the basket does not seat securely.
• Use appropriate gloves to avoid sharp edges; test sliding action after installation.

This overflow elbow is a small drain fitting that routes excess water away from the appliance to prevent spills and water damage. It restores proper overflow/drain flow so the unit can safely divert unwanted water. What it does:

• Directs overflow or drain water from the appliance plumbing to the drain path
• Replaces cracked, clogged, or leaking elbows that can cause pooling or leaks
• Helps restore normal draining behavior and reduces risk of water where it shouldn't be
• Fits into the appliance's existing drain/overflow tubing and connections

• One overflow elbow

• Inspect surrounding hoses and clips; replace any damaged components for a reliable repair
• Disconnect power and water supply before beginning work to avoid electrical shock or flooding
• Use appropriate clamps or fittings to ensure a secure, leak-free connection

This washer agitator assembly mounts on the drive shaft and creates the back-and-forth wash action that moves laundry through water and detergent. Replacing a worn or cracked agitator restores proper turnover and cleaning performance.

• Attaches to the drive shaft/transmission to produce the oscillating wash action
• Circulates clothes for even cleaning and reduced tangling
• Replace if the washer won't agitate, the agitator free-spins or slips, laundry stays on top, or it's visibly cracked/loose
• Can also help address squeaking, clicking, or grinding caused by a damaged agitator

• Unplug the washer and turn off water supply; wear cut-resistant gloves
• Remove the dispenser/cap if present, then the inner cap; take out the retaining bolt or nut
• Lift the old agitator straight up; if stuck, rock it gently to free it without damaging the tub
• Align the new agitator with the drive splines, press down fully, reinstall fastener and cap, then run a short cycle to ensure proper agitation

The agitator screw secures the washer's agitator to the drive shaft so it can move clothes effectively during the wash cycle. Replace a lost, stripped, or rusted screw to help stop wobble and restore proper agitation.

• Fastens the agitator to the drive shaft/coupler to transfer motion
• Address a loose or wobbly agitator, rattling/clunking, or weak/intermittent agitation
• Replace if the original screw is missing, corroded, or has stripped threads or head
• Helps prevent the agitator from lifting off during operation

• Disconnect power and ensure the washer is empty before servicing
• Remove the fabric softener dispenser and agitator cap to access the fastener
• Align parts, start the screw by hand to avoid cross-threading, then tighten snugly—do not overtighten
• Reinstall caps/dispenser and run a brief test cycle to proper agitation

This replacement cover fits the washer's front service door. It restores a clean, finished look and helps shield the service compartment from dust and debris when the original cover is cracked, loose, or missing.

• Covers the service opening to protect internal components from debris and accidental contact
• Restores cabinet appearance by concealing the service area
• Replaces a broken, warped, loose, or missing cover
• Common symptoms: cover won't stay closed, visible cracks, rattling, or a missing access cover

• Disconnect power and turn off water before servicing
• Remove the damaged cover
• Align the new cover with the existing hinge/tabs and secure per your model's configuration
• Confirm proper closure and clearance before restoring power

This outer washer tub replaces a damaged or cracked 24" tub to restore proper water containment and drum rotation. It helps stop leaks and noisy operation so your washer can complete wash cycles reliably. What it does:

• Holds wash water and supports the inner drum during operation
• Prevents leaks caused by cracks, corrosion, or deformation
• Restores proper drum alignment to reduce noise and vibration
• Works with existing seals, bearings, and suspension when undamaged

• One 24" outer tub

• Disconnect power and water before starting any repair
• Inspect seals, bearings, and mounting hardware; replace as needed for a complete repair
• This part may require drum removal and basic tools; follow OEM service instructions