Parts for Maytag MVWC360AW0: 03 - Basket And Tub Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

Impeller cap that fits over the pump impeller to protect moving parts and help maintain proper water circulation. Replacing a cracked or missing cap helps reduce leaks and restore reliable pump performance. What it does:

• Covers and protects the pump impeller from debris and direct contact.
• Helps maintain correct water flow and impeller alignment inside the pump housing.
• A damaged or missing cap can cause reduced circulation, noisy operation, or leaks near the pump area.
• Small, inexpensive replacement that can prevent further pump damage when installed promptly.

• Disconnect power (and water if applicable) before accessing the pump area.
• Access may require removing an access panel or lower kick plate; keep fasteners and panels organized.
• Press the cap onto the impeller until fully seated; avoid forcing if resistance indicates other damage.
• Inspect the impeller and nearby seals while replacing the cap; replace the pump assembly or seals if they show wear.

The Washplate Bolt is an OEM part for Whirlpool washing machines. This bolt is designed to secure the washplate to the washer's drive shaft, ensuring stable and effective agitation during the wash cycle.

Causes of a bad washplate bolt can include stripping or wearing out from regular use, corrosion from exposure to water and detergents, or damage due to over-tightening or improper installation. A faulty bolt can compromise the washplate's stability and affect the washing machine's performance.

Symptoms of a bad washplate bolt include:

• The washplate being loose or wobbling during operation
• Unusual noises such as rattling or clunking during the wash cycle
• Poor cleaning performance due to ineffective agitation
• The washplate detaching from the drive shaft

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Agitator Bolt Washer is an OEM part for Whirlpool washing machines. It sits beneath the agitator bolt, providing a secure and tight seal to ensure the agitator remains firmly attached to the drive shaft. This washer plays a crucial role in the smooth and effective operation of the agitator during the wash cycle.

You should replace this agitator bolt washer if it becomes worn out, cracked, or lost. Causes of a bad washer can include regular wear and tear, exposure to harsh detergents, or high levels of agitation that can degrade the material over time.

Symptoms of a bad agitator bolt washer include:

• The agitator being loose or wobbling during the wash cycle
• Unusual noises coming from the agitator area
• Ineffective washing performance
• The agitator not staying in place

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This absorber is the factory-design replacement part that restores the appliance's intended absorption function, helping maintain normal operation and reduce related performance issues. What it does:

• Absorbs and manages moisture/condensate or trapped vapors in the appliance's system to support normal function.
• Helps prevent symptoms commonly linked to a failed absorber, such as excess moisture, unusual odors, or intermittent system cycling.
• Restores the original fit and function when the installed absorber is cracked, broken, or heavily degraded.
• Matches OEM shape and connection points for a direct replacement.

• One absorber replacement as shown

• High-level replacement: access the absorber location; no specialized calibration typically required.
• Disconnect power (and water supply if applicable) before removing panels or replacing parts.
• Handle carefully to avoid damage to surrounding components and wiring; use manufacturer-recommended fasteners.

This replacement washplate sits at the bottom of the tub and uses low-profile fins to move laundry and water for effective cleaning. Replace it if the original is cracked, stripped, or no longer gripping the drive hub.

• Creates the wash action by circulating water and rolling clothes through the tub
• Transfers motor torque via the center splines to agitate fabrics
• Common symptoms: clothes not moving, poor cleaning, wobbly/loose washplate, or ratcheting/grinding during wash
• Visual clues: cracks, broken fins, or rounded/stripped splines

• Disconnect power and turn off water supply before servicing
• Remove the center cap/dispenser, then remove the center bolt and lift off the old washplate
• Clean the hub splines; seat the new washplate fully, reinstall and tighten the center bolt, and replace the cap
• Run a short cycle to ensure proper wash action and quiet operation

The Whirlpool screw is an OEM replacement part responsible for securing various components and parts of your washing machine. These screws are designed to fasten different elements within the appliance, ensuring their stability and proper functioning. The specific location of these screws can vary depending on the washing machine model and design, but they are commonly used to secure panels, brackets, and other components in place.

This part fixes the following symptoms

• Excessive vibration or shaking during the wash or spin cycles
• Loud or unusual noises coming from the appliance
• Loose or wobbly parts within the machine
• Panels or components that become detached or dislodged
• Difficulty in assembling or disassembling parts during maintenance or repair

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Drive Hub Kit is an OEM replacement part for Whirlpool washers. This kit includes an important transmission component - the drive hub - along with mounting hardware. The drive hub transfers power from the washer motor to turn the wash basket and agitate laundry.

Symptoms of a bad drive hub can include:

• The washer failing to agitate clothes or spin excessively slow
• Strange noises coming from the drive assembly
• Difficulty shifting between cycles

Causes of a bad drive hub include normal wear over time, strain from heavy or unbalanced loads, or damage from impact or other external forces.

This OEM replacement kit is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

The Drive hub retainer is an OEM replacement part for Whirlpool washing machines. It connects the drive motor and agitator gear, transmitting rotational power from the motor to enable drum rotation during the wash cycle. 

Causes of a bad retainer can include wear and tear over time, cracked or damaged retaining clips or plastic components, or failure of the retaining mechanism that secures the hub in place. 

Symptoms of a bad retainer include: 

• The washtub or drum not spinning during the wash cycle 
• Grinding or screeching noises coming from the drive components
• The agitator wobbling or becoming loose inside the washtub

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This tie wire secures wiring and small components to a tree-style mounting post, helping keep harnesses organized and preventing chafing or loose connections. Durable metal construction holds wiring in place for reliable operation. What it does:

• Secures wiring bundles and small components to a tree-style mount or post
• Helps prevent wires from rubbing against sharp edges or vibrating loose
• Reduces risk of intermittent electrical connections caused by loose harnesses
• Keeps internal wiring organized for safer, cleaner repairs

• Tie wire

• Disconnect power and unplug the appliance before servicing
• Position wires on the tree mount and wrap or fasten the tie wire
• Trim or bend any sharp ends to avoid contact with other parts or wiring
• Replace if damaged, corroded, or no longer holds wiring securely

This is a Whirlpool washing machine basket. The washing machine basket holds laundry during a wash cycle. The basket may become damaged over time due to normal wear and tear, which can be exacerbated by overloading laundry or using the wrong amount of detergent. When the basket starts to become damaged or malfunction, noticeable noise increases may take place during use. Eventually, the damage will lead to the basket failing to spin. The old basket can be removed by first removing the top portion by pushing the fastening clips that hold it in place. After removing the top, reach down to remove the softener cup. Using a socket, unfasten the agitator at the bottom of the basket. After removing the agitator, the basket should easily lift out of the machine.This part is a genuine OEM product and is sourced directly from the manufacturer. It is intended for use in Whirlpool, Maytag, Kenmore, and Crosley appliances.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

Note: Bearings are only available with the gearcase assembly.

The Tub Seal is an OEM part for Whirlpool washing machines. Located between the outer tub and inner basket, it forms a barrier preventing leaks that could damage surrounding components and structures.

Causes of a bad tub seal can be cracks or compression failures due to repetitive impacts and stresses from continual clothes tumbling. Detergents and temperature fluctuations also break down rubber over decades when exposed to laundry environments.

Symptoms of a bad tub seal include: 

• Water leakage noticed around the base of the washer cabinet
• Reduced or inefficient cleaning from leaking wash water 
• Potential water damage risks to floors and home infrastructure

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This pump drain filter helps protect the appliance's drain pump by screening out debris before it enters the pump. A clean, intact filter supports proper draining and helps prevent clogs and pump damage.

• Screens debris before it reaches the drain pump
• Helps maintain proper draining performance
• May resolve issues like slow or incomplete draining, standing water, or drain-related noises
• Replacing a damaged or missing filter can reduce repeat clogs

• Unplug power and shut off water supply before service
• Access location varies by model; have towels ready for any residual water
• Note orientation of the old filter for correct placement
• After installation, check for leaks and run a brief drain cycle to verify operation

This machine screw secures components in place to maintain proper alignment and stability during appliance operation. Replacing a worn or missing screw restores a tight fit and helps prevent vibration, noise, or loosening parts.

• Provides a secure mechanical fasten for panels, brackets, or internal assemblies
• Helps correct rattling, vibration, or loose-fitting parts
• Useful when an original screw is stripped, corroded, or lost
• Sized to match 8-18 thread applications in compatible units

• Disconnect power and shut off water or gas before servicing
• Note original screw location and orientation for correct reassembly
• Start threads by hand to avoid cross-threading; do not overtighten
• Replace any damaged clips or mounts the screw engages

The Suspension Rod Kit is an OEM part for Whirlpool washers. This kit contains the suspension rods that connect the outer tub to the base of the washing machine, providing support and stability during the wash cycles. Each rod measures 23-1/4"L x 1-1/2" in diameter, designed to handle heavy loads.

Symptoms of worn or damaged suspension rods may include:

• Excessive vibration or shaking during spin cycles
• Loud banging or thumping noises
• Leaks due to increased stress on tub components
• The washing machine walking or moving excessively

Causes of suspension rod failure can include normal wear over time, impact or damage from overloading, or improper leveling and installation.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.

The Suspension Bearing Kit is an OEM part for Whirlpool washing machines. It is designed to support the tub assembly and ensure smooth, stable operation during the wash cycle. The kit includes bearings and other components that help absorb vibrations and reduce noise, contributing to the longevity and efficiency of the machine. The 8-piece set has 4 types of suspension rod supports made of strong plastic and about 1.5 inches in diameter. 

Symptoms of a bad Suspension Bearing Kit include:

• Unusual noise during the spin cycle,
• Excessive vibration or "walking" of the washer,
• The washing machine drum sagging or appearing off-balance.

Causes of suspension bearing failure often involve wear and tear from regular use, overloading of the machine, or inadequate maintenance leading to deterioration of parts.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This clamp secures a washer or dryer hose to its connection to prevent leaks and keep the hose firmly in place during operation. It replaces worn or loose clamps that allow water to escape or hoses to detach. What it does:

• Holds a washer/dryer hose to a nipple, collar or fitting to maintain a sealed connection
• Prevents water leaks caused by loose or corroded clamps
• Stops hoses from slipping off during drain or fill cycles
• Restores proper hose retention and reduces risk of water damage

• Disconnect power and turn off the water supply before starting any repair
• Inspect hose and fitting for damage; replace hose if cracked or frayed
• Use appropriate pliers or a screwdriver for the clamp style; avoid overtightening to prevent hose damage
• Verify a leak-free connection after restoring power and water

This replacement screw secures panels, brackets, and other components in your appliance to keep them aligned and rattle-free. Replacing worn, stripped, or missing hardware restores a tight fit and helps maintain safe, quiet operation.

• Fastens panels, brackets, or internal parts to the cabinet/frame
• Helps maintain alignment to reduce vibration and rattling
• Replaces lost, stripped, or corroded screws
• Common symptoms: loose panels/trim, rattles, or a screw that won't tighten

• Disconnect power; shut off water or gas if applicable
• Match thread and length to the original; replace one at a time to keep alignment
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly—do not overtighten, especially into plastic or thin sheet metal

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.