Parts for Ge PDT720SSH7SS: Body Parts

The Affresh Dishwasher Cleaner is an OEM accessory designed specifically for Whirlpool brand dishwashers. This citrus-scented tablet removes residue, odor-causing soils, and food particles from the dishwasher tub and gasket area during the cleaning cycle. Symptoms of a buildup include unwanted odors emanating from the dishwasher, especially after opening the door. Over time, residue and grime accumulate in hard-to-reach areas and provide an environment for mold and mildew growth.

Regular cleaning helps prevent this by removing leftover soils before they harden or encourage bacterial activity. The Affresh tablet utilizes a unique blend of cleaning ingredients that target soils and biofilms through a combination of powerful scrubbing action and natural cleaning enzymes.

As the #1 recommended dishwasher cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and select Kenmore dishwashers for consistent cleanliness and freshness. The package includes six tablets 4.2 ounces

The Door Spring is an OEM part for GE dishwashers. This part provides the necessary tension to the dishwasher door, allowing it to open and close smoothly and securely. The door spring helps balance the door’s weight, preventing it from falling open too quickly or slamming shut.

Causes of a bad door spring can include wear and tear from frequent use, stretching or breaking due to overloading the door, or damage from improper handling. 

Symptoms of a bad Door Spring include:

• The door falling open quickly without resistance
• Difficulty in keeping the door open at a desired angle
• The door slamming shut instead of closing gently
• Unusual noises when opening or closing the door

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This leveling leg adjusts the dishwasher's height at the base, helping you level and stabilize the unit inside the cabinet. Proper leveling reduces rocking and vibration and promotes a tight door seal and smooth rack operation.

• Screws into the base frame to set height and level the dishwasher
• Supports the unit to prevent rocking or wobbling
• Helps maintain door alignment and sealing; poor leveling can contribute to leaks
• A worn, bent, or missing leg can make leveling difficult and increase vibration/noise

• Disconnect power and shut off water; slide the dishwasher out if needed for access
• Turn the leg with a wrench or pliers to adjust height; replace by threading the new leg into the base
• Use a bubble level to set side-to-side and front-to-back level before re-securing the unit
• Do not overtighten; ensure both legs carry weight evenly on a solid floor surface

The Heating Element is an OEM part for GE dishwashers. It is responsible for heating the water during the wash cycles and for drying the dishes after the rinse cycle. Proper functioning of the heating element ensures optimal cleaning and drying performance.

Causes of a bad heating element can include mineral buildup from hard water, electrical faults, or general wear and tear over time. Damage to the heating coil or connections can also impair its functionality.

Symptoms of a bad heating element include:

• Dishes not drying properly
• Dishwasher cycles taking longer than usual
• Water not heating during the wash cycle
• Error codes related to heating issues

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This leak pan is the factory replacement drip/overflow tray that catches and channels unwanted water away from the appliance to help prevent damage to floors and cabinetry. Fits where the original pan collected condensation or small leaks. What it does:

• Catches water from minor leaks, condensation, or defrost drain overflow
• Directs collected water to the appliance drain path or containment area
• Helps prevent water from reaching flooring and cabinetry
• Common symptom: water pooling under or around the appliance

• Disconnect power and water supply before beginning any service
• Access typically requires removing the appliance kickplate or lower access panel
• Inspect and clear associated drain lines and gaskets while replacing the pan

This Sideblaster inlet restores proper water delivery to the dishwasher's side jets, helping ensure targeted spray along the tub wall. A secure, leak-resistant connection supports consistent cleaning performance on items near the side spray area.

• Feeds water from the circulation system to the side-blaster jets on the tub wall
• Maintains a sealed pass-through to help prevent leaks at the side jet connection
• Helps correct weak/no spray from side jets and poor cleaning near the side of the tub
• Replaces cracked, loose, or damaged inlet fittings that can drip or reduce spray

• Disconnect power and shut off water supply before servicing
• Remove lower rack and panels as needed; you may need to pull the dishwasher out to reach the hose connection
• Transfer and reuse existing clamp/hardware; seat the seal properly and orient the inlet correctly
• Restore water/power and test for leaks and proper side-jet spray before reassembly

The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.

Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.

Symptoms of a compromised screw placement include:

• Noises or abnormal sounds coming from inside the tub  
• Intermittent error codes related to moving components
• Detached or misaligned spray arms or filters
• Insecure tub fixtures that can be jarred with normal operation 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This high loop drain hose creates the required elevated drain loop to help prevent dishwasher backflow and ensure proper drainage. It replaces a worn or damaged drain loop and restores correct drain routing for reliable performance. What it does:

• Forms the high loop in the dishwasher drain line to reduce risk of sink water siphoning back into the appliance
• Directs wastewater from the dishwasher into the household drain properly
• Helps avoid intermittent draining issues caused by a collapsed or split drain loop
• Fits into existing drain connections—used where an elevated drain loop is required

• Designed for in-line replacement; route the hose to create a high loop secured under the countertop or cabinet as shown in the appliance installer instructions
• Turn off power and water supply to the appliance before performing service
• Inspect clamps and fittings and replace if corroded; ensure all connections are snug but not over-tightened

The Upper Spray Arm is an OEM part for GE dishwashers. It is designed to distribute water evenly throughout the upper rack during the wash cycle, ensuring that all dishes are thoroughly cleaned. The spray arm rotates to provide coverage and spray patterns that reach every dish and utensil. The arm measures about 10 inches by 2.5 inches

Over time, the upper spray arm can become clogged with food particles or mineral deposits, which can impede its function. Physical damage or wear and tear can also cause it to fail.

Symptoms of a bad upper spray arm include:

• Dishes on the upper rack not getting clean
• Reduced water pressure from the upper arm
• Spray arm not spinning or moving properly
• Visible cracks or damage to the spray arm

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Fill Funnel Service Kit is an OEM replacement part for GE dishwashers. It contains the funnel assembly and seal/gasket used for the water inlet. Reliable filling is important for effective cleaning.

Causes can be cracks, tears, or deformities developing in seals over extended use periods. Mineral buildup may also compromise sealing surfaces.

Symptoms of a bad service kit include:

• Water leaks from around the inlet area
• Inconsistent water filling during dishwasher cycles
• Damp residue or puddles below inlet assembly

This is a genuine OEM part that works for some models of GE, and Hotpoint models.

The Fill Funnel Service Kit is an OEM replacement part for GE dishwashers. It contains the funnel assembly and seal/gasket used for the water inlet. Reliable filling is important for effective cleaning.

Causes can be cracks, tears, or deformities developing in seals over extended use periods. Mineral buildup may also compromise sealing surfaces.

Symptoms of a bad service kit include:

• Water leaks from around the inlet area
• Inconsistent water filling during dishwasher cycles
• Damp residue or puddles below inlet assembly

This is a genuine OEM part that works for some models of GE, and Hotpoint models.

This fill hose routes incoming water from the household supply into the washer. It replaces cracked, split, or leaking inlet hoses to restore proper water fill and help prevent leaks during the wash cycle. What it does

• Connects the home water supply to the washer's inlet valve to allow normal water fill.
• Replaces damaged or deteriorated hoses that drip, spray, or fail to maintain water flow.
• Helps eliminate visible leaks and reduces the risk of water damage around the appliance.
• Restores reliable fill performance when the original hose is worn, swollen, or split.

• Turn off water supply and unplug the washer before starting installation.
• Confirm correct hose orientation and thread type before tightening to avoid cross-threading.
• Hand-start threads, then snug with a wrench—do not overtighten; check all fittings for leaks after restoring water.
• Inspect inlet valve and fittings; replace any corroded or damaged connectors for a secure seal.

The Fill Funnel Service Kit is an OEM replacement part for GE dishwashers. It contains the funnel assembly and seal/gasket used for the water inlet. Reliable filling is important for effective cleaning.

Causes can be cracks, tears, or deformities developing in seals over extended use periods. Mineral buildup may also compromise sealing surfaces.

Symptoms of a bad service kit include:

• Water leaks from around the inlet area
• Inconsistent water filling during dishwasher cycles
• Damp residue or puddles below inlet assembly

This is a genuine OEM part that works for some models of GE, and Hotpoint models.

This conduit seal fits the dishwasher's water-feed conduit connection, keeping wash water contained and pressure steady to the spray arms. Replacing a worn seal helps address leaks and maintain reliable cleaning performance.

• Seals the joint where the dishwasher's water feed conduit/tube connects within the wash system
• Helps prevent water leaks at the conduit connection point
• Maintains proper wash pressure for consistent spray performance
• Common signs of failure: drips beneath the unit, visible cracks/flattening, or a loose-fitting old seal

• Disconnect power and shut off the water supply before servicing
• Access the conduit connection (location varies by model), remove the old seal, and clean mating surfaces
• Lightly moisten the new seal to ease installation and seat it fully
• Reassemble and run a brief cycle to check for leaks

This side blaster assembly mounts to the dishwasher's tub wall and directs a focused spray into the wash cavity to help scour stuck-on residue. Replace if the nozzle is cracked, clogged, or leaking to restore proper cleaning performance.

• Provides targeted side-wall spray to supplement the main wash arms
• Helps flush debris and improve coverage along racks and corners
• Common failure signs: weak or no side spray, poor cleaning near the side wall, visible cracks, or leaks at the side jet
• Restores intended spray pattern and water distribution when the original is damaged or blocked

• Disconnect power and turn off the water supply before servicing
• Remove the lower rack to access the side blaster location
• Release the retainer/screw, disconnect the hose/tube, and install the new assembly; ensure the sealing surface is clean and properly seated
• Reconnect, secure, and run a test cycle to check for leaks and proper spray

This SCR 8-18 silicon-controlled rectifier replaces the control semiconductor that switches and regulates power to heating or motor circuits in compatible appliances, restoring proper power delivery and control. It's a direct-fit electrical replacement part. What it does

• Acts as a switching device on control boards to allow or block current flow when signaled.
• Regulates power delivered to heating elements or motor circuits to enable proper operation.
• Commonly linked to symptoms like no heat or intermittent heating, motors that won't start, or erratic control-board behavior.
• Helps restore reliable on/off control when a failed SCR is causing open or shorted conditions.

• One SCR 8-18 silicon-controlled rectifier (WD02X10160).

• Always disconnect power before servicing the appliance to avoid shock.
• Handle the part carefully; avoid touching leads and use anti-static precautions if available.
• Inspect surrounding connectors and wiring for damage; replace any corroded terminals.

The Door Cable is an OEM part for GE dishwashers, designed to support and assist in the smooth and controlled opening and closing of the dishwasher door. This cable connects the door to the spring mechanism, providing the necessary tension to balance the door's weight during operation. 

Signs that you might need to replace the Door Cable include the door suddenly dropping open or being difficult to raise, indicating a break or excessive wear.  

Symptoms of a bad Door Cable include:

• The dishwasher door slamming open or requiring extra force to close.
• Unusual noises when opening or closing the door, suggesting the cable is not running smoothly.
• Difficulty in keeping the door partially open, affecting loading and unloading dishes.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Hinge Pulley is an OEM part for GE dishwashers. This part works with the door springs and cables to provide smooth and balanced movement. This pulley ensures that the door operates efficiently, making it easy to load and unload dishes.

Causes of a bad door hinge pulley can include wear and tear from regular use, accumulation of debris or grease, or damage from accidental impacts.  

Symptoms of a bad door hinge pulley include:

• The dishwasher door not staying open or closed properly
• Difficulty in opening or closing the door
• Unusual noises during door operation, such as squeaking or grinding
• The door feeling loose or unbalanced

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Size: 8-32 t. Includes 12 screws.

The Affresh Dishwasher Cleaner is an OEM accessory designed specifically for Whirlpool brand dishwashers. This citrus-scented tablet removes residue, odor-causing soils, and food particles from the dishwasher tub and gasket area during the cleaning cycle. Symptoms of a buildup include unwanted odors emanating from the dishwasher, especially after opening the door. Over time, residue and grime accumulate in hard-to-reach areas and provide an environment for mold and mildew growth.

Regular cleaning helps prevent this by removing leftover soils before they harden or encourage bacterial activity. The Affresh tablet utilizes a unique blend of cleaning ingredients that target soils and biofilms through a combination of powerful scrubbing action and natural cleaning enzymes.

As the #1 recommended dishwasher cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and select Kenmore dishwashers for consistent cleanliness and freshness. The package includes six tablets 4.2 ounces

This front tub spacer cushions and positions the washer tub to reduce vibration and keep the inner and outer tubs properly aligned during operation. It helps maintain smooth spin cycles and prevents metal-to-metal contact. What it does:

• Centers and supports the front of the washer tub to maintain proper drum alignment
• Absorbs movement to reduce vibration and noise during spin
• Prevents rubbing or contact between the tub and cabinet components
• Can be associated with symptoms like excessive vibration, rubbing sounds, or off-center spins

• Designed for direct replacement; inspect surrounding seals and mounts during service
• Use basic hand tools; follow the washer's service manual for safe disassembly and reassembly
• Disconnect power and water supply before beginning any repair

This dishwasher junction box cover encloses the power-connection compartment at the base of the unit. Replacing a damaged or missing cover helps protect wiring from debris and accidental contact, restoring a safe, secure connection area. What it does:

• Covers and secures the dishwasher's electrical junction box
• Helps shield wire splices from moisture, dust, and accidental contact
• Restores proper fit when the original cover is cracked, broken, or missing
• Useful if the junction box won't stay closed or the cover no longer secures properly

• Includes 1 junction box cover

• Disconnect power at the circuit breaker before servicing
• Remove the lower access/kick panel to reach the junction box
• Remove the old cover and screw, position the new cover, and secure with the existing hardware
• Ensure all wiring and the strain relief are fully inside the box before closing; restore power and test

The Water Valve Assembly is an OEM replacement part for GE dishwashers. It consists of multiple valves that work together to control water flow during different stages of the wash cycle.

Causes of a bad water valve assembly can include mineral buildup restricting flow, cracks developing in valve housings allowing leaks, and failure of components like solenoids or inlet/outlet valves.

Symptoms of a faulty water valve assembly include:

• Abnormal sounds or squealing during filling
• Inability to properly fill or wash dishes
• Slow, inconsistent, or no water circulation
• Water leaks in the valve area

This GE replacement is compatible with additional brands like Hotpoint, Profile, and select Kenmore models as well.

The Electronic Control Board Jumper Wire is an OEM replacement part for GE dishwashers.

Causes of a faulty jumper wire include fracturing of internal interconnects from normal circuit board flexing during door closes. Overly aggressive cleaning solvents may also damage wire insulation over time.

Symptoms of a problematic jumper wire include:

• Intermittent or unreliable operation of wash cycle features
• Unresponsive touch controls and inability to start cycles
• Error codes displayed and failure to detect cycle outputs

This is a genuine OEM part that works for some models of GE, and Hotpoint models.

The Service Machine Control is an OEM part for GE dishwashers. This part oversees and manages the various functions and cycles of the appliance. Acting as the brain of the dishwasher, this control unit receives input from the user and sensors throughout the machine, then directs operations such as water intake, temperature regulation, cycle duration, and drying processes.

Causes of a bad Service Machine Control can include power surges, moisture exposure, or physical damage to the circuitry.

Symptoms of a bad Service Machine Control include:

• Dishwasher failing to start or complete cycles
• Inconsistent cleaning performance
• Unusual noises or error codes indicating faults in the system
• The dishwasher not responding to controls or inputs

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This dielectric shield is a small heat-resistant insulator that protects ignition wiring and components from heat and prevents electrical arcing near burners. It helps maintain reliable spark ignition and reduces risk of shorts or damage from high temperatures. What it does:

• Shields spark module wires and electrode areas from direct heat exposure
• Helps prevent arcing and electrical shorts that can interrupt ignition
• Reduces risk of melted or damaged wire insulation near burners or ovens
• Commonly replaced when cracked, deformed, or showing burn marks that affect ignition

• Disconnect power (and gas if applicable) before servicing electrical or ignition components
• Inspect surrounding wiring and connectors; replace any damaged insulation or terminals
• Reinstall using original mounting hardware and ensure the shield fully covers the wire/electrode area

This control box bottom is the lower housing that protects and supports the appliance's control electronics, helping keep wiring and components secure from debris and moisture. Fits into the control assembly to restore proper enclosure and support. What it does:

• Provides a protective lower enclosure for the control board and wiring harness
• Helps keep dust, lint and moisture away from sensitive electronics
• Secures the control board and related connectors in their correct position
• Prevents rattling or movement that can cause loose connections or noise

• One control box bottom (base cover) as pictured

• Disconnect power before servicing to avoid shock or component damage
• Handle electronics carefully and avoid touching circuit contacts
• Installation typically requires basic hand tools and removal of the control housing

Replacement control box top that restores the protective cover for the appliance control housing, keeping wiring and electronics enclosed for a cleaner appearance and safer operation. What it does:

• Covers and protects the control housing and internal wiring from dust, spills, and accidental contact
• Helps secure control components in place and maintain the appliance's factory appearance
• Commonly replaced when the original cover is cracked, broken, missing, or shows visible damage
• Can prevent loose wiring from catching or being accidentally disturbed

• One control box top

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Remove any screws or retainers securing the existing cover and lift off the old top; keep fasteners if reinstalling
• Align the replacement top and secure with the original fasteners; ensure wiring is routed and seated before closing

This Insulation Bag Assembly is an OEM part for GE dishwashers. It's designed to provide sound insulation and heat retention, enhancing the overall efficiency and noise reduction of the dishwasher. The insulation bag plays a vital role in maintaining the optimal operating temperature within the dishwasher while minimizing the sound during its operation. 

Replacement of the insulation bag assembly may be necessary due to wear, damage, or inefficiency in sound dampening or heat retention. A compromised insulation bag can lead to increased noise levels and reduced energy efficiency.

Symptoms of a malfunctioning Insulation Bag Assembly include:

• Noticeably louder operation of the dishwasher.
• The outer surfaces of the dishwasher becomes unusually warm during operation.
• Physical damage or wear to the insulation material.
• Changes in the dishwasher's drying performance due to altered internal temperatures.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

Size: 10-16 ab.

This hose clamp kit secures the washer's hoses at the pump, tub, or valve connections, helping stop leaks and hose blow-offs. Replace worn or missing clamps to restore a tight, reliable seal during fill, wash, and drain.

• Secures drain, pump, and fill hoses to fittings to maintain a watertight seal
• Helps prevent drips, leaks, and hoses slipping off during vibration
• Replaces clamps that are rusted, stripped, deformed, or missing
• Common symptoms: water leaking at hose joints, loose hose connections, clamp won't tighten
• Useful when installing a new hose, pump, or valve

• Unplug the washer and turn off water supplies; have towels or a pan ready for residual water
• Release and remove old clamps; seat the hose fully over the fitting before installing new clamps
• Tighten evenly and do not overtighten to avoid hose or fitting damage
• Restore power and water, then run a short cycle to check for leaks at each connection

Size: 10-32 GXTT FLP.595 S

The Door Latch is an OEM replacement part for GE dishwashers. It serves the critical function of securely keeping the door closed during wash cycles through its engaging bolt design.

Over extended use, aspects of the latch can degrade such as worn plastic catch areas, loosened screws, or a faulty latch hook mechanism. Causes are generally normal wear and tear. 

Symptoms of a bad latch include: 

• The door not closing fully or popping open accidentally  
• Inability to fully lock or latch no matter how hard the door is pressed
• Damaged or stripped screws holding the mechanism 

This OEM replacement part is compatible with Hotpoint, RCA and some Kenmore models as well.

This flexible door gasket seals the dishwasher tub opening to keep wash water inside the cabinet. Replace a worn or flattened gasket to stop leaks and restore a tight, quiet door seal.

• Compresses between the door and tub to prevent water from escaping during wash and rinse cycles
• Helps reduce moisture at the front corners and under the door
• Common failure signs: water leaking at the bottom/front of the door, visible tears, cracks, or permanent flattening of the seal
• Can also help if the door feels loose or doesn't seal evenly

• Disconnect power and turn off water before service
• Open the door and pull the old gasket straight out of the groove; clean the channel of debris and buildup
• To ease installation, warm the new gasket to relax it, then press it into the channel starting at the top center and work evenly down both sides
• Close the door for several minutes to help seat the new seal, then run a short cycle to check for leaks

The Tub to Cabinet Trim is an OEM part for GE dishwashers. This kit includes the trim that fits around the edges of the dishwasher tub, providing a finished look and sealing the edges to prevent leaks and debris from getting into the internal components. The trim measures approximately 26 x 2 inches.

Causes of a bad tub trim can include wear and tear from regular use, damage from cleaning or loading dishes, and exposure to moisture and detergents which can degrade the material over time. Improper installation can also result in poor fitting or gaps in the trim.

Symptoms of a bad Tub Trim Kit include:

• Visible gaps or loose trim around the dishwasher tub
• Leaks around the edges of the tub
• Accumulation of debris in the trim area
• The dishwasher door not closing properly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Tub to Cabinet Trim is an OEM part for GE dishwashers. This kit includes the trim that fits around the edges of the dishwasher tub, providing a finished look and sealing the edges to prevent leaks and debris from getting into the internal components. The trim measures approximately 26 x 2 inches.

Causes of a bad tub trim can include wear and tear from regular use, damage from cleaning or loading dishes, and exposure to moisture and detergents which can degrade the material over time. Improper installation can also result in poor fitting or gaps in the trim.

Symptoms of a bad Tub Trim Kit include:

• Visible gaps or loose trim around the dishwasher tub
• Leaks around the edges of the tub
• Accumulation of debris in the trim area
• The dishwasher door not closing properly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Tub to Cabinet Trim is an OEM part for GE dishwashers. This kit includes the trim that fits around the edges of the dishwasher tub, providing a finished look and sealing the edges to prevent leaks and debris from getting into the internal components. The trim measures approximately 26 x 2 inches.

Causes of a bad tub trim can include wear and tear from regular use, damage from cleaning or loading dishes, and exposure to moisture and detergents which can degrade the material over time. Improper installation can also result in poor fitting or gaps in the trim.

Symptoms of a bad Tub Trim Kit include:

• Visible gaps or loose trim around the dishwasher tub
• Leaks around the edges of the tub
• Accumulation of debris in the trim area
• The dishwasher door not closing properly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Mounting Bracket is an OEM replacement part for GE dishwashers. This bracket secures the dishwasher in place underneath the kitchen countertop. 

Causes of failure relate to stresses of a heavy dishwasher pushing down against the countertop edges combined with constant machine vibration over extended service life. 

Symptoms of a cracked or damaged mounting bracket include:

• Excessive movement play or sloshing of the installed dishwasher  
• Strange noises when the dishwasher is running
• Difficulty removing or installing the dishwasher   
• Visible bending of bracket components out of intended position

This genuine GE bracket is compatible with Hotpoint and RCA dishwashers.

This control board clip secures the dishwasher's electronic control board to its mounting location, keeping it properly seated during operation. Replacing a damaged or missing clip helps prevent vibration, movement, and wire-connector strain.

• Holds the electronic control board firmly in its designated mount or housing
• Helps prevent board movement, rattling, and connector stress from vibration
• Replace if the clip is cracked, deformed, or missing
• Symptoms include a loose control assembly, rattling noises, or a board that won't stay seated

• Disconnect power at the breaker before servicing
• Access the control area; support the board when removing/installing the clip
• Handle the control board by the edges and observe ESD precautions
• Ensure the new clip is fully seated and the board is secure before reassembly

The Affresh Dishwasher Cleaner is an OEM accessory designed specifically for Whirlpool brand dishwashers. This citrus-scented tablet removes residue, odor-causing soils, and food particles from the dishwasher tub and gasket area during the cleaning cycle. Symptoms of a buildup include unwanted odors emanating from the dishwasher, especially after opening the door. Over time, residue and grime accumulate in hard-to-reach areas and provide an environment for mold and mildew growth.

Regular cleaning helps prevent this by removing leftover soils before they harden or encourage bacterial activity. The Affresh tablet utilizes a unique blend of cleaning ingredients that target soils and biofilms through a combination of powerful scrubbing action and natural cleaning enzymes.

As the #1 recommended dishwasher cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and select Kenmore dishwashers for consistent cleanliness and freshness. The package includes six tablets 4.2 ounces