Parts for Lg LSSG3017ST/00: Cavity Parts

Replace a gas range burner when flames are uneven, won't ignite, or produce yellow flames. Direct swap installation takes 10-15 minutes with basic tools.

Burner not heating or heating unevenly? This surface element restores full heat output on your range. Straightforward DIY fix in under an hour.

Binding head screw that fastens microwave panels and components. Replaces missing, stripped, or damaged screws to restore secure assembly and eliminate rattling.

Replace your range's worn or missing insulator. This thermal protection component installs between heating elements to prevent heat transfer damage.

Insulator component for electric and gas ranges. Protects wiring and components from heat damage. Replace if cracked, melted, or deteriorated over time.

Replacement mounting screw for microwave panels and components. Secures loose or rattling parts when original screws are stripped, missing, or damaged.

Replacement screw secures panels and components in your microwave. Install when original hardware is stripped, rusted, or missing to stop rattles.

Secures the fan blade to the motor shaft in ranges and ovens. Replace if loosened from vibration, stripped threads, or missing to restore proper mounting.

Factory mounting screw secures brackets, covers, and internal assemblies in your range. Replaces missing, stripped, or damaged fasteners for proper fit.

Replacement screw for electric and gas ranges. Secures internal components and panels. Needed when original is stripped, missing, or damaged during repair.

Secures panels, brackets, and internal components in your range. Replace this screw if the original is missing, stripped, or rusted for proper fit.

Customized screw secures panels, brackets, and small assemblies in ranges and ovens. Replace when original specialized fastener is missing or damaged.

Hardware washer that distributes fastener load and maintains proper spacing in your range. Replace if missing, worn, or damaged to restore secure mounting.

Secures the fan blade to the motor shaft in ranges and ovens. Replace if loosened from vibration, stripped threads, or missing to restore proper mounting.

Replacement mounting screw for range panels and components. Needed when original screw is stripped, lost, or damaged. Secures panels for stable operation.

Control knob assembly for gas ranges and cooktops. Installs on the control panel to operate burners and oven settings. Replace cracked, loose, or missing knobs.

Control knob assembly for gas range. Installs on the control panel to operate burners. Replace when cracked, broken, or missing for proper operation.

Range not heating or control panel unresponsive? This control board assembly restores oven functions. Moderate difficulty repair requiring basic tools.

Controls range side panel functions including cooktop burners and oven lights. Replace if buttons stop responding or display malfunctions. Verify fit with your model number.

Fix a range that won't heat, cycle on, or respond to buttons. This control board assembly interprets inputs and restores reliable oven operation.

Fix an unresponsive oven control knob or broken control dial. This encoder board detects knob position and sends signals to adjust temperature settings.

Replacement screw for electric and gas ranges. Secures panels, brackets, and internal assemblies. Restores tight fit when original is missing or stripped.

Factory-style screw for securing panels, brackets, and assemblies on gas ranges and cooktops. Replace if missing, stripped, or damaged during repairs.

Replace a faulty gas range burner nozzle if flames are uneven, yellow, or won't ignite properly. This part meters fuel flow to each burner for balanced heating.

Fix range display not working, oven not heating, or control panel errors with this power control board assembly. Moderate DIY repair for ranges.

Fix a range that won't heat, displays error codes, or has unresponsive controls. This main control board manages power distribution and system logic.

Fix F11 error codes or slow heating with this gas range oven igniter. Solves no-heat issues and temperature problems. DIY repair takes under 1 hour.

Secures the gas burner nozzle in your range cooktop. Replace this holder if it's cracked, broken, or no longer holding the nozzle firmly in position.

Fix misaligned or wobbling burner flames with this nozzle holder. Secures the nozzle in place to restore proper gas flow and even heating on your range.

Replace a gas range burner assembly when flames are uneven, burner won't ignite, or produces weak heat. Moderate DIY repair in 30-45 minutes.

Adjustable metal leveling foot that elevates and stabilizes your range. Mounts to the bottom of the unit. Replace if broken, worn, or missing.

Replace your range's outer door frame to restore door structure, improve seal integrity, and fix cracked or bent trim. Confirm fit with your model number.

Replacement window glass for range oven doors. Restores clear viewing area when original glass is cracked, chipped, cloudy, or shattered. Installs inside door.

Replacement window glass for range oven doors. Restores clear viewing area when original glass is cracked, chipped, cloudy, or shattered. Installs inside door.

Inner door cover panel for electric and gas ranges. Replaces damaged, cracked, or missing inner door cosmetic panels. Installs on the interior door assembly.

Bracket that anchors the handle to your range oven door. Replace if cracked, stripped, or broken to restore secure handle attachment and alignment.

Supports your range door and provides smooth opening and closing. Replace if the door sags, misaligns, or won't stay open. Confirm fit with your model.

Replace a non-responsive or malfunctioning gas range control panel. Common when buttons don't respond or the display is blank. Moderate difficulty repair.

Plastic supporter stem that fits between the control knob and encoder board on your range. Replace if broken, cracked, or jamming the control switch.

Wire harness for gas ranges. Connects electrical components inside your range. Replace if wires are frayed, damaged, or connections are loose or broken.

Fixes intermittent power or control issues caused by damaged wiring. This harness restores electrical connections between range components for reliable operation.

Range controls not responding or features intermittent? This wiring harness restores power and signal connections between components for reliable operation.

If your range control panel is loose or cooking functions are erratic, the PCB supporter may be cracked. This mounting bracket secures the circuit board.

Fix an oven door that won't stay open or slams shut with this range door spring. Simple DIY repair requiring only a Phillips screwdriver, 30 minutes.

Replaces a worn, cracked, or missing range control knob. Restores grip and indicator pointer for selecting heat settings and safe operation.

Circular lug that connects stripped wires to threaded terminals in microwaves. Replace if cracked, corroded, or missing to restore secure connections.

Rear cover panel for gas ranges. Mounts on the back of the range to conceal internal components. Replace if cracked, damaged, or missing.

Idle packing bushing for electric and gas ranges. Replaces worn, cracked, or missing bushings. Ensures proper fit and cushioning for range components.

Covers the oven's upper exterior and protects internal components. Replace this top plate panel if yours is cracked, dented, or damaged from wear.

Transparent glass shelf that installs inside your range for organized storage. Replace yours if cracked, chipped, broken, or missing to restore usable space.

Replace cracked, warped, or missing oven rack shelves in your electric or gas range. Slides into oven cavity to provide sturdy, level surfaces for cooking.

Fix uneven flames or burner not lighting with this gas range burner tube. Direct replacement for standard slide-in and freestanding models.

Surface burner grate for gas ranges and cooktops. Sits atop burner to support cookware during cooking. Replace if warped, cracked, broken, or chipped.

Grille assembly covers the cooking surface on gas ranges. Replace if warped, bent, cracked, or broken to ensure proper pan placement and safe operation.

Need an extra cooking surface on your gas range? This grille assembly adds a flat-top cooking area between burners. Heavy-duty cast construction.

Gas burner orifice nozzle for ranges and cooktops. Installs inside the burner box to meter gas flow. Replace if damaged, missing, or converting fuel type.

Fix weak flames or burners that won't light properly with this gas burner nozzle. Controls gas flow for proper flame size. Simple install with basic tools.

Gas burner orifice nozzle for ranges and cooktops. Installs inside the burner box to meter gas flow. Replace if damaged, missing, or converting fuel type.

Fix weak flames or burners that won't light properly with this gas range burner nozzle. Controls gas flow for optimal flame performance. DIY install.

Weak or uneven flames on your gas range? This burner orifice nozzle meters gas flow for proper flame size and consistent heating. Easy DIY fix.

Gas valve assembly that controls and delivers gas to the burner. Mounts inside the range cabinet. Replace if cracked, leaking, or damaged to restore safe gas flow.

Fix burners or oven not lighting with this gas valve assembly. Controls gas flow to restore safe ignition and consistent heating in your range.

Gas range won't ignite or heat properly? This valve assembly controls gas flow to your oven and burners. Restores ignition and safe operation.

Controls gas flow to your range burner. Replace this valve assembly when the original is faulty, leaking, or damaged to restore safe gas regulation.

Fixes burners that won't light or ignite properly on your gas range. This gas valve assembly controls gas flow to surface burners. Moderate DIY repair.

Replace a gas range burner when flames are uneven, won't light, or produce yellow/orange flames. Simple repair requiring only basic tools and 15 minutes.

Replace a cracked or damaged burner cap causing uneven flames or yellow/orange fire. This cap sits atop the burner element to distribute heat evenly.

Protective cover that fits over the burner head on your gas range cooktop. Replace if cracked, chipped, broken, or missing to restore appearance.

Uneven flames or poor heat distribution? This gas range burner cap sits atop the burner element to contain and distribute flames evenly for optimal cooking.

Fix intermittent power issues or control failures with this range main wiring harness. Connects electrical components for proper signal communication.

Cable assembly for gas ranges. Replaces worn, damaged, or broken cable connections inside your range. Essential structural component for proper operation.

Fix control issues or power failures with this gas range cable assembly. Restores reliable operation when wiring is damaged, burned, or has loose connections.

Fixes unresponsive controls or features not working on your gas range. This cable assembly restores power and signal connections between components.

Fix burners that won't light or controls that don't respond with this range wire harness. Restores electrical connections between components. Moderate DIY.

Fix unresponsive control panel buttons with this tactile switch replacement. Restores reliable button response. Simple DIY repair, typically under 5 minutes.

Range won't turn on or has no power? This power cord assembly replaces damaged or worn main power cables, restoring electrical connection. Direct fit.

Microwave won't turn on or has no power? A failed thermostat often causes complete power loss. Moderate DIY repair requires disassembly to access.

Replace your range's wire harness if the existing wiring is damaged, frayed, or showing signs of wear. Connects electrical components inside your range.

If your oven won't reach the right temperature or shows an F9 error, the temperature sensor may be faulty. Simple DIY repair in under 45 minutes.

Replace a damaged or corroded wire harness in your range. This single-connection harness restores proper electrical connections when original wiring is frayed, melted, or broken.

Fix uneven cooking or baking in your range. This convection fan motor circulates hot air for consistent heat distribution. Moderate DIY repair.

Secures the control panel to your range cabinet. Replace if the bracket is cracked, bent, stripped, or hardware no longer holds the console firmly in place.

Fix inaccurate oven temperatures with this range temperature sensor. Restores proper heating cycles when your oven runs too hot or cold.

Fix range control panel display issues or power failures with this DC power jack. Restores electrical connection to control board. Moderate DIY repair.

Replace your range convection fan assembly if the oven isn't heating evenly or the fan is noisy. Fits electric and gas ranges. Moderate DIY repair.

Motor loose or vibrating excessively? This motor bracket secures the motor to the chassis, reducing vibration and maintaining alignment for quieter operation.

Fix loose or misaligned range components with this retaining ring. Secures parts in place to prevent excess movement and wear. Simple installation.

Fixes uneven baking and longer cooking times in your range. This convection fan blade restores proper air circulation for consistent oven temperatures.

Microwave not cooling properly or making unusual noise? This fan blade circulates air for heat dissipation and even cooking. DIY-friendly repair.

Glass tray not rotating? This bracket secures the turntable motor to the microwave cavity base, ensuring proper alignment for smooth, even heating.

Replace your damaged or broken range handle bar. This bar installs on the oven door, providing a secure grip for opening and closing. Order now.

Fix a humming or stalled range component with this AC synchronous motor assembly. Restores proper rotation when the motor fails to turn or makes noise.

Replace a cracked, bent, or missing oven rack support in your range. Installs inside the oven cavity to hold and guide the rack. Essential part.

Replace your range's control panel if the original is cracked, damaged, or has faded graphics. This panel mounts to the front of your appliance housing.

Replace your burned-out or dim oven light bulb to restore interior visibility while cooking. Direct-fit incandescent lamp for safe food monitoring. Verify fit with your model number.

This hinge bracket secures the oven door hinge mechanism on your range. Replace if the bracket is cracked, broken, bent, or missing to restore door support.

Replace your range oven door gasket to restore proper heat sealing and improve cooking efficiency. Fits select electric and gas range models.

Secures and supports your range oven door hinge for proper alignment and smooth operation. Replace if bracket is cracked, bent, or damaged to restore door fit.

Replacement support bracket for range control panels. Installs behind the control panel to provide structural support. Needed when original is broken or missing.

Range oven door gasket seals the oven cavity to retain heat and improve efficiency. Replace if torn, cracked, or no longer sealing properly. Confirm fit.

Leaking or damaged tubing in your gas range? This pipe restores proper fluid routing and stops leaks. Direct replacement for failed factory tubing.

Gas pipe connects burner manifold to burner valves on gas ranges. Replace if cracked, corroded, or leaking. Ensures safe gas flow to burners.

Fix dripping or inconsistent water flow from your gas range dispenser. This nozzle replaces cracked or worn spouts to restore proper dispensing function.

This replacement case is the outer housing that protects and supports internal components, helping keep your appliance's parts secure and aligned for reliable operation. What it does

• Covers and shields internal components from dust and debris
• Keeps internal parts properly positioned to prevent rubbing or misalignment
• Helps reduce vibration noise by securing assemblies in place
• Visible damage or cracking can expose internals and affect function

• One replacement case

• Disconnect power before starting any repair to avoid shock
• Use basic hand tools; keep fasteners and panels organized during disassembly
• Handle plastic housing carefully to avoid cracking or scratching
• Take care to reconnect wiring and secure connectors per manufacturer guidance

Replace a failing gas range burner assembly when flames are uneven, burner won't ignite, or heating is inconsistent. Direct-fit part restores cooking.

Fix a burner that won't light or heat unevenly with this gas range burner assembly. Common repair for weak or inconsistent flames on cooktop surfaces.

Outer housing that protects and supports the heating assembly in your gas range. Replace if cracked, warped, or damaged to restore proper airflow.

Pressure regulator assembly for gas ranges. Mounts to the gas supply line to control fuel pressure. Replace if cracked, leaking, or damaged.

Base plate for electric and gas ranges. Provides structural support at the bottom of the appliance. Replace if cracked, broken, or missing. Easy install.

If your gas range burner won't ignite or heat unevenly, this surface burner assembly restores reliable flame and even cooking. Moderate DIY repair.

Secures and finishes your range door opening with proper structural support. Replace if cracked, warped, or damaged to restore door alignment and seal.

Outer front plate panel for ranges. Restores exterior appearance and provides finished surface for controls. Replaces damaged, dented, or scratched panels.

Replaces the outer control panel on your range. Restores appearance when the original is cracked, scratched, or worn. Covers and protects controls.

Rubber foot pad that supports and stabilizes your range on the floor. Replace if cracked, broken, worn, or missing to keep your appliance level.

Idle bracket for electric and gas ranges. Secures internal components in place. Replace if bracket is bent, cracked, broken, or missing during repair.

Replacement slider for range drawers and panels. Restores smooth movement when original is worn, cracked, or broken. Mounts to moving components for alignment.

Replace worn range drawer sliders to restore smooth, quiet operation and proper alignment. Prevents damage to surrounding trim. Confirm fit with your model.

This insulator is a small mounting cushion that reduces vibration and prevents metal-to-metal contact in the appliance. It helps lower operational noise and protects nearby parts from wear caused by movement. What it does:

• Cushions and isolates components to reduce vibration and rattling
• Prevents metal edges from rubbing together and causing wear or noise
• Protects wiring and hoses from chafing where parts meet
• Keeps panels and brackets securely spaced for proper alignment

• Disconnect power before accessing internal panels or mounting points
• Remove only the panels required to reach the original insulator; retain fasteners for reassembly
• Press or slide the insulator into place on the mounting stud or bracket; gentle hand pressure is usually sufficient

Replacement oven rack support bracket for your range. Installs inside the oven cavity to hold racks in place. Replace if cracked, broken, or missing.

Fix an oven that won't heat or gives F9 error code. This gas valve regulates gas flow to burners. Moderate DIY repair requiring basic tools.

Mounting anchor for range door handles. Replaces worn, broken, or missing anchors to restore secure handle attachment and eliminate wobbling or loose fit.

Replacement gas conversion kit assembly for ranges. Includes mounting hardware and fittings to convert from natural gas to propane or vice versa. Use when parts are missing, damaged, or worn during fuel type conversion.

Accessory assembly for electric and gas ranges and wall ovens. Replaces damaged, broken, or missing accessory components. Restores proper fit and function.