Parts for Kitchenaid KG25H0XBM5: Color Variation Parts

Cobalt blue mixing bowl for stand mixer. Replaces cracked, chipped, or missing bowls. Direct fit replacement for your mixer's bowl assembly.

Black decorative panel for stand mixer housing. Replaces cracked, chipped, or discolored panels. Restores your mixer's appearance and finish.

Housing for stand mixers. Covers and protects internal components. Replace if cracked, broken, or damaged. Direct fit for compatible models.

Replace the outer housing shell on your stand mixer. This structural component covers the motor and internal mechanisms. Order a new housing if yours is cracked or damaged.

Metallic chrome accent cover for stand mixers. Replaces cracked, chipped, or discolored cosmetic trim pieces. Restores professional appearance.

Empire Red porcelain enamel finish for mixer bowls. Restores faded, chipped, or worn coating. Brings back glossy factory appearance and color.

Onyx black finish panel restores your mixer's exterior appearance. Replaces worn, scratched, or mismatched decorative panels with a factory-style surface.

If your stand mixer is excessively noisy or vibrating, the motor housing may be cracked or damaged. This white housing secures and protects the motor.

Fix mixer attachment spinning issues with a planetary gear assembly replacement. Common fix for stripped gears or attachments not rotating properly.

If your stand mixer is making grinding noises or the beater isn't rotating properly, the planetary gear may be worn. Moderate DIY repair in 30-45 minutes.

Fix poor mixing or uneven beater rotation with this stand mixer planetary gear assembly. Connects beaters to motor for proper orbital motion.

Fixes grinding noise or mixer bowl not spinning. This planetary gear assembly transfers motor power to restore smooth rotation. Moderate difficulty repair.

This planetary gear assembly transfers motor torque through the gearbox to drive the appliance's internal mechanism, restoring proper gear-driven motion and reducing slipping or grinding during operation. What it does:

• Re-meshes the motor output into the gearbox so driven components rotate smoothly
• Helps eliminate symptoms like noisy gearing, uneven movement, or loss of drive
• Restores proper gear engagement when worn or damaged planetary gears cause slipping
• Works as the internal gear cluster that distributes torque to downstream parts

• High-level replacement: remove power and access the gearbox or motor housing; replace the worn planetary assembly with the matching unit
• Use proper tools and follow the appliance service manual for disassembly/reassembly to avoid damaging seals or fasteners
• If gears were damaged, inspect mating gears, bearings, and shafts for wear before reassembly
• Dispose of damaged gears properly;

If your stand mixer bowl isn't rotating or attachments won't spin, the planetary gear assembly may be worn. Moderately difficult repair requiring disassembly.

Fix grinding noises or mixer bowl not spinning with this planetary gear assembly. Restores smooth rotation and proper mixing action in stand mixers.

Replace the planetary gear assembly in your stand mixer. This rotating component drives the beater attachments and may need replacement if cracked or worn.

If your mixer won't agitate properly or makes grinding noises, this planetary gear assembly transfers motor motion to restore mixing action.

If your stand mixer won't turn or makes grinding noises, the planetary gear assembly likely failed. Transfers motor power to the beater shaft.

Fix a loose or noisy planetary that's separating from the shaft. This lower drive assembly restores smooth beater rotation. Moderate DIY repair.

Fix a mixer planetary that fell off or slipped down. This assembly holds the beater and rotates it around the bowl for thorough mixing. DIY repair.

Planetary gear assembly for KitchenAid stand mixers. Installs on the drive shaft to rotate beaters. Replace if bent, cracked, or teeth are worn.

Planetary gear assembly for KitchenAid stand mixers. Installs on the drive shaft to rotate beaters. Replace if bent, cracked, or teeth are worn.

If your mixer attachment falls off or makes clunking noises, the planetary assembly likely needs replacement. This is a 15-minute repair with basic tools.

Holds and rotates mixer attachments around the bowl. Replace if cracked, worn, bent, or falls out during operation. Includes housing and shaft.

This Support mounts and stabilizes internal components, helping keep parts aligned and preventing movement or vibration that can cause noise or wear. A simple replacement to restore proper fit and reduce rattling. What it does

• Provides a stable mounting point for adjacent components to prevent shifting or misalignment
• Reduces vibration and rattling that can occur when supports break or crack
• Helps maintain proper spacing so linked parts operate smoothly
• Common symptom: loose or vibrating component, intermittent noise, or visible broken/cracked support

• High-level replacement; access may require removing panels or adjacent parts
• Disconnect power (and water, if applicable) before starting work for safety
• Inspect surrounding fasteners and mating surfaces; replace any damaged clips or screws

This support is a replacement mounting bracket that helps secure internal appliance components for stable operation and proper alignment. It restores attachment points worn or damaged from regular use. What it does:

• Provides a stable mounting point for internal panels or components
• Prevents excessive movement, rattling, or misalignment during operation
• Restores proper fit where original support is cracked, bent, or broken
• Helps maintain correct component spacing to avoid interference or wear

• One support

• Disconnect power to the appliance before starting any repair
• Inspect surrounding parts and retain original fasteners unless replacements are supplied
• Use basic hand tools; avoid over-tightening fasteners which can crack plastic parts

This replacement support secures internal components and helps stabilize assemblies for proper operation and alignment. It restores part positioning to reduce vibration and wear, improving appliance reliability and performance. What it does:

• Provides structural support for internal components and assemblies
• Keeps parts aligned to prevent rubbing, noise, and premature wear
• Helps maintain proper spacing for safe, reliable operation
• Fits into the original mounting locations to restore factory stability

• One support as pictured

• Disconnect power (and gas if applicable) before starting any repair
• Use appropriate hand tools and avoid overtightening fasteners

This support mounting bracket replaces a broken or worn bracket that secures internal components and keeps them aligned for reliable operation. Restores proper fitment and reduces movement that can cause noise or wear. What it does:

• Secures and stabilizes internal components or assemblies
• Prevents sagging, misalignment, and excess vibration
• Helps stop rattling or noise caused by loose supports
• Restores correct part positioning after breakage or cracking

• Disconnect power or unplug the appliance before starting work
• Use basic hand tools; removal may require loosening nearby fasteners or clips
• Handle edges carefully to avoid cuts; wear gloves if needed

This drum support keeps the dryer drum properly aligned so clothes tumble smoothly and the dryer runs quietly. It replaces a worn or broken support that can let the drum sag, rub, or make scraping noises. What it does:

• Holds the drum in position to prevent rubbing against the cabinet
• Reduces scraping, thumping, or rubbing noises during operation
• Helps maintain even drum rotation for consistent drying
• Prevents excess wear to the drum edge and adjacent seals

• Disconnect power (and gas if applicable) before beginning any repair
• Access requires removing the dryer cabinet/front panel to reach the drum support
• Inspect surrounding rollers, glides, and seals; replace any other worn parts for best results
• Use basic hand tools and follow OEM disassembly instructions

This support is a small mounting bracket designed to secure and stabilize a range or oven assembly, helping keep panels and components aligned for safe, quiet operation. It restores proper fit and reduces movement of the supported part. What it does:

• Provides a secure mounting point to stabilize an appliance panel or component
• Prevents excessive vibration and rattling from loose assemblies
• Helps correct misalignment or sagging of the attached panel or trim
• Restores proper mechanical support after a broken or worn bracket

• One support mounting bracket as shown

• Disconnect power to the appliance before beginning any repair
• Remove exterior panels or trim as needed to access the support; keep fasteners organized
• Use appropriate hand tools; avoid overtightening screws which can damage the bracket or mounting surface

This Support stabilizes and positions an internal appliance assembly to keep moving parts aligned and reduce wear. Replacing a worn support restores proper fit and helps reduce vibration and noise from misaligned components. What it does:

• Provides a mounting point and structural support for the appliance's internal assembly
• Keeps rotating or sliding parts properly aligned during operation
• Prevents excessive movement that can cause noise or premature wear
• Helps maintain sealing and component clearances to reduce stress on adjacent parts

• Disconnect power and water before starting any repair
• Access may require removal of the cabinet, panels, or adjacent components
• Inspect surrounding components for wear and replace as needed for best results
• Tighten fasteners to OEM torque where specified and test operation after install

This support is a metal mounting bracket that secures and stabilizes appliance panels and assemblies to prevent movement and wear. It restores proper alignment so doors, panels or internal components fit and operate correctly. What it does

• Anchors and supports adjacent panels or assemblies to reduce sagging and misalignment
• Keeps components securely positioned to prevent rattling and excessive vibration
• Helps maintain proper clearance for moving parts and seals
• Commonly replaced when mounting points are bent, broken, or worn

• Disconnect power and water (if applicable) before beginning any repair.
• Installation typically requires basic hand tools; handle edges carefully to avoid cuts.
• Inspect surrounding fasteners and replace any damaged screws or clips for a secure fit.

Support component for stand mixers. Provides structural reinforcement to the mixer housing. Replace if cracked, broken, or missing for proper stability.

Fix grinding noises or mixer speed issues with this stand mixer gearcase assembly. Essential component housing internal transmission gears.

This gearcase is the drive transmission that transfers motor power to the washer agitator and basket, restoring normal agitation and spin performance. It replaces a worn or damaged transmission assembly to help the washer move and clean properly. What it does:

• Transfers motor torque to the agitator and tub so the washer can agitate and spin
• Restores normal agitation or spinning when the transmission is worn or stripped
• Stops slipping, grinding, or inconsistent motion caused by damaged gears
• Works with the motor coupling and drive components to maintain correct drive alignment

• One gearcase (transmission) assembly

• Disconnect power and turn off water supply before starting any repair
• Access may require removing the cabinet, drive belt, and motor—follow OEM service instructions
• Inspect adjacent parts (motor coupling, seals, fasteners) and replace any worn components

Is your stand mixer making grinding noises or leaking grease? The gearcase houses the transmission gears that power mixing attachments and may need replacing.

Fix a washer that won't agitate or spin with a new gearcase transmission. This part transfers motor power to the agitator and basket assembly.

If your stand mixer makes grinding noises or won't mix properly, the lower gearcase may be worn. This part transfers motor power to the beaters.

Fixes stand mixer gears grinding or not turning properly. This lower gearcase houses the internal drive mechanism. Moderate DIY repair project.

Fix grinding noise or slipping during mixing with a new lower gearcase. Transfers motor power to the rotating assembly. Moderate DIY repair.

Fixes mixer that won't turn or makes grinding noises. This gearcase assembly transfers motor power to beaters. Moderate DIY repair, 1-2 hours.

Fix a dropped bottom housing or grinding noise in your stand mixer. This gearcase assembly replaces broken bushings and worn gears. Moderate difficulty repair.

Fix grinding noise or leaking grease with a new lower gearcase housing. Restores proper alignment and contains lubrication for quieter mixing.

This replacement column restores proper support and alignment for the appliance cabinet or trim assembly, helping panels and doors sit correctly and preventing gaps or sagging that affect appearance and operation. What it does:

• Provides structural support for the cabinet/trim assembly and helps maintain alignment
• Keeps adjacent panels and doors properly positioned to prevent rubbing or gaps
• Replaces damaged, bent, or cracked columns that cause cosmetic or fit issues
• Helps restore factory fit and finish after collision or wear

• One replacement column

• Disconnect power and/or gas (if applicable) and remove any obstructing trim before starting
• Use proper fasteners and follow OEM alignment points; part may require removal of surrounding panels
• Handle carefully to avoid scratching finished surfaces; test fit before final fastening

Decorative panel for stand mixer in Imperial black finish. Replaces cracked, chipped, or discolored panels on the mixer housing exterior.

Onyx black trim band cover for stand mixers. Replaces cracked, chipped, or discolored decorative trim pieces. Restores the finished look of your mixer.

Replace your mixer's cracked or discolored body cover panel. This cosmetic part refreshes your stand mixer's exterior appearance when worn or damaged.

White decorative column cover for stand mixers. Replaces cracked, chipped, or discolored housing on the mixer body. Restores cosmetic appearance.

Decorative panel for stand mixer exterior. Replace this cosmetic component if yours is cracked, scratched, discolored, or missing for a refreshed look.

Onyx black housing cover for stand mixers. Replaces cracked, chipped, or discolored exterior casing. Restores clean appearance to mixer body.

Empire red decorative housing shell for stand mixers. Replaces cracked, chipped, or discolored exterior casing. Restores appearance and protects motor.

Fixes misalignment and noisy operation caused by a cracked or worn support bowl. Restores proper centering of internal components. Direct replacement.