Parts for Kitchenaid KG25H0XDR5: Color Variation Parts

This porcelain enamel finish restores the factory color and smooth, glossy surface to compatible ranges and cooktops, improving appearance and protecting underlying metal from wear and staining. What it does

• Replaces worn, chipped, or faded enamel finish to make the appliance look like new
• Provides a durable, heat-resistant surface that resists stains and everyday wear
• Matches the OEM "Empire Red" color for a cohesive, factory-correct appearance
• Helps protect the underlying metal from corrosion and further cosmetic damage

• One porcelain enamel finish (Empire Red)

• Disconnect power and gas before starting any repair
• Removal of trim, screws, or panels may be required; follow the appliance's OEM service instructions
• Handle with care to avoid chipping the enamel during installation

This Onyx black finish panel restores the appliance's exterior appearance with a factory-style color-matched surface for a clean, uniform look. Ideal for replacing a worn or mismatched decorative panel. What it does:

• Provides a color-matched exterior surface to restore cosmetic appearance
• Covers scratches, chips, or discoloration on the appliance trim or door area
• Replaces a damaged or faded decorative panel without changing function
• Keeps visible surfaces consistent with the appliance's Onyx black finish

• High-level cosmetic replacement; basic hand tools may be required
• Follow OEM instructions for removal and reattachment to avoid damaging adjacent parts
• Handle with care to avoid scratching the finish during installation
• Disconnect power before servicing

This motor housing is the outer mounting and protective enclosure for the appliance motor, finished in white to match the cabinet. It provides a secure support for the motor and helps isolate noise and vibration. What it does:

• Supports and secures the motor assembly in the appliance
• Protects the motor from debris and contact with moving components
• Helps reduce motor noise and vibration through stable mounting
• Resolves symptoms like excessive vibration, rubbing noises, or misaligned motor mounting

• One motor housing (white)

• Disconnect power to the appliance before starting any repair
• Typical installation requires removing panels and either the drum or motor access components; follow OEM instructions
• Handle housing edges carefully and retain all mounting hardware for reassembly

Color: Copper Pearl

This planetary gear assembly transfers motor motion to the appliance's rotating components, restoring reliable rotation and reducing abnormal noise. It's the direct replacement gear used in the appliance's drivetrain to help resume normal operation. What it does:

• Transfers motor torque to the agitator/drum or rotating hub for proper rotation
• Restores smooth, consistent movement and can stop slipping or reduced rotation
• Replaces worn or damaged gears that cause grinding, clunking, or unusual noise
• Helps prevent further wear to connected drive components when replaced promptly

• Disconnect power to the appliance before starting any repair.
• Requires partial disassembly of the washer/dryer/motor housing; refer to the service manual or diagram for access steps.
• Inspect surrounding components (seals, bearings, fasteners) for wear during replacement.

This planetary gear assembly transfers motor torque through the gearbox to drive the appliance's internal mechanism, restoring proper gear-driven motion and reducing slipping or grinding during operation. What it does:

• Re-meshes the motor output into the gearbox so driven components rotate smoothly
• Helps eliminate symptoms like noisy gearing, uneven movement, or loss of drive
• Restores proper gear engagement when worn or damaged planetary gears cause slipping
• Works as the internal gear cluster that distributes torque to downstream parts

• High-level replacement: remove power and access the gearbox or motor housing; replace the worn planetary assembly with the matching unit
• Use proper tools and follow the appliance service manual for disassembly/reassembly to avoid damaging seals or fasteners
• If gears were damaged, inspect mating gears, bearings, and shafts for wear before reassembly
• Dispose of damaged gears properly;

This planetary gear assembly drives the agitator/inner transmission components in compatible top-load washers, restoring smooth rotational motion and reliable agitation for normal wash cycles. What it does:

• Transfers motor torque through the transmission to the washer agitator for proper wash action
• Helps restore smooth, even rotation and reduces slipping or erratic agitation
• Commonly replaced when you hear grinding, clunking, or when the agitator fails to rotate normally
• Works with the washer's gearcase/transmission as part of the drive train

• Replacement requires disassembly of the washer transmission/agitator; refer to your model's service manual
• Disconnect power and water, and remove the washer cabinet or transmission cover before starting
• Inspect surrounding seals and fasteners while the unit is open; replace any worn components as needed

This planetary is the replacement internal gear assembly that helps transfer motor motion to the agitator/impeller for proper wash action. It restores drivetrain engagement so the washer can agitate and spin more effectively. What it does:

• Replaces a worn or damaged planetary gear assembly that causes weak or no agitation/spinning
• Transmits motor torque to the transmission and agitator/impeller for normal wash cycles
• Can address symptoms like intermittent agitation, loud grinding noises, or slipping during cycles
• Fits into the transmission/gearcase as a direct replacement when the original planetary fails

• Inspect surrounding seals and gears during replacement
• Disconnect power and water supply before beginning any repair
• Use proper tools and follow OEM diagram for correct orientation and torque; avoid forcing parts to prevent damage
• Replace any worn fasteners or gaskets found during installation

This planetary gear assembly transmits motor torque through the gearbox to drive the agitator/spindle, restoring proper mechanical drive and restoring wash/spin function. It's a direct-replacement gearbox component used in drive systems. What it does

• Transfers rotational force from the motor to the transmission/agitator for normal wash and spin cycles
• Replaces worn or damaged gears that cause noisy operation, slipping, grinding or loss of drive
• Restores consistent drive engagement and reduces abnormal vibration or jerking during cycles
• Works as part of the transmission/gearbox to maintain proper washer drivetrain operation

• One planetary gear assembly

• Disconnect power and water supply before starting
• Inspect mating gears, seals and bearings for wear and replace as needed to prevent premature failure
• Use OEM fasteners and alignment procedures from the service manual for correct fit and function
• Test a complete cycle after installation to confirm normal drive operation and quiet performance

This silver Planetary assembly is the lower drive unit of a stand mixer that carries the beater shaft. Replacing a worn or loose planetary restores smooth, consistent planetary motion and reliable attachment rotation for dependable mixing performance.

• Transfers motor power to the beater and creates true planetary mixing action
• Houses the beater shaft and interfaces with the lower gear train
• Helps maintain stable beater-to-bowl alignment at the bottom of the mixer head
• Typical failure symptoms: beater not turning or stalling, grinding/clicking from the lower head, or noticeable wobble/excess play in the planetary

• Unplug the mixer and remove the bowl and beater before service
• Drive out the roll pin to remove the old planetary; transfer and reuse any model-specific hardware
• Clean and re-grease gears with food-grade mixer grease during reassembly, if needed
• Reinstall the planetary and pin; verify beater-to-bowl clearance per the owner's manual before use

The Planetary is an OEM part for Whirlpool stand mixers. This part holds the beater and ensures it rotates around the bowl to mix ingredients thoroughly. The planetary mechanism allows for consistent and even mixing by moving the beater in a planetary motion, which covers the entire bowl.

Causes of a bad planetary can include regular wear and tear, heavy use, or mechanical failure within the gears.

Symptoms of a bad planetary include:

• Beater not rotating properly
• Unusual noises during operation
• The mixer head wobbling or shaking
• Inconsistent mixing results

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Color: Metallic Chrome

Color: Metallic Chrome

The Planetary Assembly is an OEM replacement part for Kitchenaid stand mixers. It is the central component that transmits rotational power from the motor to the mixing attachment through an intricate system of gears.

Causes of a bad planetary assembly can include worn gears that no longer mesh properly, broken or missing gear teeth from overloading, or a failed bearing.

Symptoms of a bad planetary assembly include:

• Slipping or jumping of gears during mixing
• Grinding or scraping noises
• Inability to mix thoroughly on higher speeds
• Premature failure of the motor

This OEM replacement is also compatible with Maytag, Whirlpool, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Planetary Assembly is an OEM part for Whirlpool stand mixers. This component is responsible for holding the mixer attachments and rotating them around the bowl, ensuring thorough and even mixing of ingredients.

Over time, the planetary assembly can become worn out or damaged due to frequent use, heavy mixing loads, or lack of proper maintenance. If the planetary assembly is not functioning correctly, it can result in poor mixing performance and uneven results.

Symptoms of a bad planetary assembly include:

• Unusual noises during operation
• Attachments not rotating properly or wobbling
• Inconsistent mixing or ingredients not being fully incorporated
• The mixer head not locking into place

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This Support mounts and stabilizes internal components, helping keep parts aligned and preventing movement or vibration that can cause noise or wear. A simple replacement to restore proper fit and reduce rattling. What it does

• Provides a stable mounting point for adjacent components to prevent shifting or misalignment
• Reduces vibration and rattling that can occur when supports break or crack
• Helps maintain proper spacing so linked parts operate smoothly
• Common symptom: loose or vibrating component, intermittent noise, or visible broken/cracked support

• High-level replacement; access may require removing panels or adjacent parts
• Disconnect power (and water, if applicable) before starting work for safety
• Inspect surrounding fasteners and mating surfaces; replace any damaged clips or screws

This support is a replacement mounting bracket that helps secure internal appliance components for stable operation and proper alignment. It restores attachment points worn or damaged from regular use. What it does:

• Provides a stable mounting point for internal panels or components
• Prevents excessive movement, rattling, or misalignment during operation
• Restores proper fit where original support is cracked, bent, or broken
• Helps maintain correct component spacing to avoid interference or wear

• One support

• Disconnect power to the appliance before starting any repair
• Inspect surrounding parts and retain original fasteners unless replacements are supplied
• Use basic hand tools; avoid over-tightening fasteners which can crack plastic parts

This replacement support secures internal components and helps stabilize assemblies for proper operation and alignment. It restores part positioning to reduce vibration and wear, improving appliance reliability and performance. What it does:

• Provides structural support for internal components and assemblies
• Keeps parts aligned to prevent rubbing, noise, and premature wear
• Helps maintain proper spacing for safe, reliable operation
• Fits into the original mounting locations to restore factory stability

• One support as pictured

• Disconnect power (and gas if applicable) before starting any repair
• Use appropriate hand tools and avoid overtightening fasteners

This support mounting bracket replaces a broken or worn bracket that secures internal components and keeps them aligned for reliable operation. Restores proper fitment and reduces movement that can cause noise or wear. What it does:

• Secures and stabilizes internal components or assemblies
• Prevents sagging, misalignment, and excess vibration
• Helps stop rattling or noise caused by loose supports
• Restores correct part positioning after breakage or cracking

• Disconnect power or unplug the appliance before starting work
• Use basic hand tools; removal may require loosening nearby fasteners or clips
• Handle edges carefully to avoid cuts; wear gloves if needed

This drum support keeps the dryer drum properly aligned so clothes tumble smoothly and the dryer runs quietly. It replaces a worn or broken support that can let the drum sag, rub, or make scraping noises. What it does:

• Holds the drum in position to prevent rubbing against the cabinet
• Reduces scraping, thumping, or rubbing noises during operation
• Helps maintain even drum rotation for consistent drying
• Prevents excess wear to the drum edge and adjacent seals

• Disconnect power (and gas if applicable) before beginning any repair
• Access requires removing the dryer cabinet/front panel to reach the drum support
• Inspect surrounding rollers, glides, and seals; replace any other worn parts for best results
• Use basic hand tools and follow OEM disassembly instructions

This support is a small mounting bracket designed to secure and stabilize a range or oven assembly, helping keep panels and components aligned for safe, quiet operation. It restores proper fit and reduces movement of the supported part. What it does:

• Provides a secure mounting point to stabilize an appliance panel or component
• Prevents excessive vibration and rattling from loose assemblies
• Helps correct misalignment or sagging of the attached panel or trim
• Restores proper mechanical support after a broken or worn bracket

• One support mounting bracket as shown

• Disconnect power to the appliance before beginning any repair
• Remove exterior panels or trim as needed to access the support; keep fasteners organized
• Use appropriate hand tools; avoid overtightening screws which can damage the bracket or mounting surface

This Support stabilizes and positions an internal appliance assembly to keep moving parts aligned and reduce wear. Replacing a worn support restores proper fit and helps reduce vibration and noise from misaligned components. What it does:

• Provides a mounting point and structural support for the appliance's internal assembly
• Keeps rotating or sliding parts properly aligned during operation
• Prevents excessive movement that can cause noise or premature wear
• Helps maintain sealing and component clearances to reduce stress on adjacent parts

• Disconnect power and water before starting any repair
• Access may require removal of the cabinet, panels, or adjacent components
• Inspect surrounding components for wear and replace as needed for best results
• Tighten fasteners to OEM torque where specified and test operation after install

This support is a metal mounting bracket that secures and stabilizes appliance panels and assemblies to prevent movement and wear. It restores proper alignment so doors, panels or internal components fit and operate correctly. What it does

• Anchors and supports adjacent panels or assemblies to reduce sagging and misalignment
• Keeps components securely positioned to prevent rattling and excessive vibration
• Helps maintain proper clearance for moving parts and seals
• Commonly replaced when mounting points are bent, broken, or worn

• Disconnect power and water (if applicable) before beginning any repair.
• Installation typically requires basic hand tools; handle edges carefully to avoid cuts.
• Inspect surrounding fasteners and replace any damaged screws or clips for a secure fit.

This gearcase is the drive transmission that transfers motor power to the washer agitator and basket, restoring normal agitation and spin performance. It replaces a worn or damaged transmission assembly to help the washer move and clean properly. What it does:

• Transfers motor torque to the agitator and tub so the washer can agitate and spin
• Restores normal agitation or spinning when the transmission is worn or stripped
• Stops slipping, grinding, or inconsistent motion caused by damaged gears
• Works with the motor coupling and drive components to maintain correct drive alignment

• One gearcase (transmission) assembly

• Disconnect power and turn off water supply before starting any repair
• Access may require removing the cabinet, drive belt, and motor—follow OEM service instructions
• Inspect adjacent parts (motor coupling, seals, fasteners) and replace any worn components

This gearcase is the washer transmission that transfers motor torque to the agitator and basket so the washer can agitate and spin properly. Replaces a worn or damaged gearbox to restore normal wash movement. What it does:

• Transfers drive from the motor to the agitator and outer basket for agitation and spinning
• Replaces stripped or noisy gears that cause grinding, clunking or loss of agitation
• Stops slipping or intermittent agitation caused by internal gear failure
• Helps eliminate unusual vibration or rough operation linked to a failing gearbox

• Disconnect power and turn off water supply before beginning service
• Requires partial disassembly of the washer cabinet and transmission area; follow OEM instructions
• May contain lubricant—inspect seals and surrounding components for leaks while installed

This lower gearcase transfers motor power to the washer's transmission, driving the agitator and drum movement. Replacing a worn gearcase restores proper agitation and reduces grinding or slipping during cycles. What it does:

• Drives the agitator/drum by housing gears that transfer motor torque to the transmission
• Fixes symptoms like no agitation, weak agitation, loud grinding or gear-noise during spin/agitate
• Helps restore consistent wash action and proper load handling when gears are damaged or worn
• Works as the lower gearbox assembly in compatible top-load washers

• One lower gearcase assembly (Imperial Black)

• Disconnect power and water supply before starting; drain washer tub to avoid spills
• Follow the washer's service manual for disassembly steps; removing the agitator and transmission access may be required
• Inspect surrounding seals, bearings and fasteners during replacement and replace if damaged
• Use proper tools and torque specifications

This lower gearcase is the replacement gearbox that transfers motor power to the appliance's drum/rotating assembly, restoring reliable drive movement and reducing grinding or slipping during operation. What it does:

• Transfers motor rotation to the appliance's drum or rotating assembly for normal operation
• Restores proper drive engagement to stop slipping or intermittent rotation
• Eliminates grinding, scraping, or unusual drive noises when worn
• Helps prevent further wear to belts and related drive components

• One lower gearcase (onyx black) as pictured

• Disconnect power before starting and follow for disassembly/reassembly
• Installation typically requires panel removal and basic hand tools; support the drum/assembly while replacing the gearcase
• Inspect and replace worn belts, idlers, or fasteners as needed to ensure long-term operation

This gearcase is the main transmission assembly that transfers motor torque to the washer's tub and agitator, restoring normal agitation and spin performance when the original gearcase fails. What it does

• Converts motor rotation into the gear reductions needed for agitation and spin cycles.
• Commonly replaced for symptoms like no agitation, slow or failed spin, grinding or clunking noises during cycles.
• Contains internal gears and bearings that can wear or break, causing irregular movement or loss of drive.
• Works with the washer's motor coupling and drive components to re-establish reliable drum motion.

• One gearcase (transmission) assembly.

• Disconnect power and water supply before beginning any repair.
• Support the washer cabinet and tub when removing the old gearcase to avoid damage or injury.
• Gearcase assemblies are heavy and contain grease—expect some lubricant exposure; clean hands and work surfaces after installation.
• Use model-specific service manual or exploded parts diagram for proper alignment and reassembly; replacement may require transfer of seals or mounting hardware.

This lower gearcase housing encloses and supports the planetary and lower gear train in a stand mixer. Replacing a damaged housing restores alignment and helps contain lubrication for quieter, consistent mixing performance.

• Houses the lower gear train and planetary shaft to maintain alignment
• Provides a sealed cavity to help retain grease around gears
• Replaces cracked, stripped, or warped housings that cause wobble or noise
• Helpful when you see grease seepage or cosmetic damage to the lower case

• Unplug the mixer and remove bowl and attachments before service
• Open the motor head and remove the planetary/gear stack as required
• Transfer components to the new housing; renew food-grade mixer grease if servicing gears
• Reassemble and verify beater-to-bowl clearance and smooth operation

This replacement column restores proper support and alignment for the appliance cabinet or trim assembly, helping panels and doors sit correctly and preventing gaps or sagging that affect appearance and operation. What it does:

• Provides structural support for the cabinet/trim assembly and helps maintain alignment
• Keeps adjacent panels and doors properly positioned to prevent rubbing or gaps
• Replaces damaged, bent, or cracked columns that cause cosmetic or fit issues
• Helps restore factory fit and finish after collision or wear

• One replacement column

• Disconnect power and/or gas (if applicable) and remove any obstructing trim before starting
• Use proper fasteners and follow OEM alignment points; part may require removal of surrounding panels
• Handle carefully to avoid scratching finished surfaces; test fit before final fastening

This bowl and foot assembly replaces a cracked or worn support bowl used to stabilize and support the appliance's internal component, restoring proper alignment and quiet operation. Durable molded construction suits direct-replacement needs. What it does:

• Supports and centers internal components to maintain smooth rotation and balance
• Replaces damaged, cracked, or warped bowl/foot that can cause rattling or uneven operation
• Restores correct spacing to prevent contact between moving parts and the cabinet
• Matches factory fit and finish for a secure, stable installation

• Disconnect power before beginning any repair to avoid electrical hazard
• Handle with care to avoid cracking the plastic; use gentle force when seating into place
• Basic hand tools may be needed to access the mounting area; model-specific diagram for access